@@fearce139 Thanks for that reply... I looked it up. You do realize Marantz and Denon are like the same company nowadays? Anyhow the model you referred is priced same as this Marantz. Do you think the Denon sets that model apart from this Marantz? I like the look of the Marantz a bit more.
Really nice job of clearly explaining this unit. Best I've seen. I just purchased one for my shop, will be here tomorrow. Will be pairing this with a pair of KEF Q300's I bought 3 years ago and have been sitting in their box all this time. looking forward to powering this up and enjoying quality stereo music in the shop. Thanks again for taking the time to review this Marantz receiver.
With the masses waking up to the joys of retro design and fashion, it is indeed heartening to see Marantz respond with their new receiver cum stereo amp.
if he were here today,elvis would have had this receiver installed in his red velvet covered bedroom in graceland though he may have dispensed with it's streaming capabilities.with a stereo receiver like this marantz,any hound dog can rock out.
@@fearce139 I have heard both and I believe that speakers are more important. Both receivers are pretty good. I have Monitor Audio silver 50 but also tested KEF LS50 both perfect.
Loved the review. Please compare this to the PM7000N. How close is it to the more expensive unit? I won't be powering demanding speakers. I ONLY stream music. Thank you.
I have this receiver and I absolutely love it! I gave it a few days to warm up and now the sound it produces through my ELAC Uni-Fi 2.0 UB52’s and my Polk RTi-A3’s is almost flawless.
Well you have a much larger transformer, larger audio grade capacitors, dual DAC, larger heat sink, and a pretty good pre amp section. For sure the NR1200 is better.
hello guys. this amp would be perfect for those speakers. first, the Klipsch speakers are VERY bright, too bright for most. The Marantz amplifiers have a very smooth, warm, and very rich sound signature, which would mate really well with bright speakers. I think the NR1200 would roll off the high end quite well so that they are not fatiguing. This is a great question to ask because the synergy between speakers and amplifiers have a LOT to do with how they will sound. If you want something even better sounding, without the HDMI, look at the Marantz PM7000N. Much better power section, BIG torrodial transformer, and beefier aluminum rails to dissipate heat. It's a lot more amp for about $400 more. Let me know how it works out.
Thanks for the review Audio Advice. I currently have a pair of B&W 603 speakers and was considering pairing it with a Marantz NR1200. In the review you mentioned the the B&W's. Would recommend the combo? And if not, which stereo receiver would be a good alternative with comparable features? I'd like a phono input, hmdi and tidal streaming and plenty of poke to power the 603's.
You're missing his point, Thom...what "stereo" mode means on these stereo receivers -- and I own an Onkyo -- is that the tone controls are IN the circuit, as opposed to switching the PURE or DIRECT modes on...
Bought the NR 1200 few days ago. I'm using it mostly as a 2 Ch system for music steaming in my room. Happy with the performance of this lil beauty. As this is my first AVR bought, as all my previous gears were mostly separate , CD player, a stereo amplifier, I would like to ask, is there any way I can do to boost the bass of this NR1200? Can I add in a power amp, stereo amp to pair with this NR1200?
Yes, that is a nice unit. And yes, the NR1200 has preamp outs so you can add a bigger stereo power amp and use it as a preamp. If you have one laying around, go that way, or reach out to us for some suggestions.
May I ask: What do the Preout jacks do ? I just got the "cousin" to the Marrantz unit - Denon DRA - 800H . I'm looking to connect my Audio -Technica TT (LP120X BT USB ), to both the Denon Phono connection using the Phono Preamp AND connect the TT to my Tascam CD Recorder in order to record CDs without having to switch connections form the Denon to the Tascam unit. I have a Schiit SAGA+ , mini Preamp - Switcher which has 5 inputs (all RCAs ) to 2 outputs. At present , I have my Tascam CD recorder sending digital out signals via a Toslink digital cable to the Denon (Wow - what a difference when playing CDs instead of via RCA connects ), directly. I also have 2 other pieces of equipment - Teac CD/ Cassette / USB player and a TEAC Dual Cassette deck connected to the SAGA+. Simply select which input you want on the SAGA , and it is set to send out puts 1) to the Denon and 2) to the Tascam CD recorder..... So, I could switch the connections from the TT to the Line inputs on the SAGA which would allow me to record CDs from the TT. But that would require disconnecting the TT from the Denon Phono connection and then connecting it to the SAGA+. Schiit Tech recommended connecting the Denon's Preouts to the SAGA+ , thus avoiding the switching the connections. The TT does have ability on the rear to switch from Phono or Line Out output. Bottomline: will this work ? And , kindly explain the purpose to the Preouts. I do have a Sub Woofer connected to 1 of the 2 Sub Preouts on the Denon. THX for any advice, much appreciated.
did you get any clue about it? I'm planning to get this Marantz to a B&W Cm7, would love to know more, used Marantz old receiver on a pair of B&W CM1 before and it was great.
I just don't get it. It is and AV receiver and it is now accepted by audiophiles because it is only 2 channel . So I didn't make mistake for buying sr 7013 instead of pm7000n for music.
Bluetooth is only A2DP not APT-X. And when I try to play from my phone through the receiver the sound lags behind the picture and I can't find how to fix it. The Audio Delay adjustment in "Settings" lets you increase the lag by up to 500ms which in my case is no help at all.
@@maxrider2887 No, the PM6006 has a toroidal transformer, has much thicker aluminum heat dissipation rails, and overall has a beefier amplifier section. However, no subwoofer output, outdated DAC, no networking functions, no radio tuner, and no HDMI switching. That being said, if you are not going to drive speakers that are not efficient or demanding with power, you will be just fine. You should wait for the new version of the PM6006 which is the PM6007. It will have a subwoofer output, upgraded DAC, and 20% more powerful for the same cost. If you are just wanting to use it for audio, go with that one over the NR1200. Good luck.
I am running Paradigm Monitor 3 speakers and the Marantz does not have enough power unless you turn it above 60. I purchased an external power amplifier to drive my speakers.
Are you running both at the same time, if so, it might not have enough juice for a larger space. Those were not easy to drive speakers. Please feel free to reach out to our team at www.audioadvice.com to help find the best power for your NHT's. Which were very good in their day!
Hello! If I go with the NR1200, would I no longer need the NA6006? I'm upgrading from a NR1403, that is starting to cut out on me intermittently. I only stream music and want to maximize my streaming quality. Thank you.
Would four Polk RM1300 satellite speakers and a subwoofer work well with this receiver? My 5.1 Onkyo died and I want to go back to a two channel stereo, but I want to use the same speakers. I appreciate your feedback.
I have a marantz . They work really well as pre amps. I use one with a studio Halfler P7000 . It murders the chip amp alone in SQ and grunt. Chip amps sound jittery especially on horns. I would pick up a used marantz reciever and say a crown microtech. It will murder this thing , guaranteed in every fashion. I use JBL 580 and have a video Genelec /JBL Studio 580 II.
Thank you. You would need a microphone preamp. Our advice would be to proceed with caution. Most home speakers are not made to handle using a microphone unless you keep the volume reasonable. Thanks for watching.
@@RasheedKhan-he6xx I have Denon DRA 800H + Monitor Audio silver 50 (but tested also Marantz and KEF LS50) Marantz is more clear/crisp but Denon is more natural and less fatigue to listen.
Andreas Keck Get you the Pioneer elite Sx-N30 they use to be 799.00 now down to about 300 bucks lots of class AB power very underrated I have a full re Jew in my channel of it and it has 2 full range preouts to add 2 separate power amps and 2 preouts for powered subwoofers I have the marantz also The Pioneer has a very rich warm sound signature with double the bass output of others in its class even in direct mode it has bass
i think onkyo is better but they dont last run way to hot, enough keep it in a air conditioned room or throw a big fan at it for longevity or just go with yamaha. i have old mid and new avr from yamaha and they all works still
Johnny Bravo Yamaha is good but I was disappointed with the newer yammy As801 my yammy ax497 from 2010 was much better I bought the Pioneer elite sx-n30 for 799.00 a 100 bucks difference than the Yammy as801 Love the Pioneer and that's coming from a yammy fan since 1989
This might be exactly what I was after, I wonder, can the zone 2 be used to bi-amp the speakers? I was looking for a stereo receiver or a 3 channel amp as I only really have room for the front speakers but so often the amps lacked HDMI inputs and any of the nice assistance tech.
@@robhoogland01 Speculating based on these measurements: www.audiosciencereview.com/forum/index.php?threads/review-and-measurements-of-marantz-av8805-av-processor.6926/
I`m here to ask the Internet for some help! I`ve got the NR1200 paired up with the Wharfedale Diamond 12.2 speakers and the quality is ...disappointing to say the least. At high volume (50% up) it`s reasonable (by no means good), but at lower volumes it sounds like my Google Home speaker...with no exaggeration. What could be the problem? It`s been sat on the shelf for about a year cause I can`t stand the sound of it. I`ve checked all the connections and adjusted the sound settings with little improvement. Do I need better speakers ? Should I add and AMP ? Could it be a faulty product ? Thanks in advance.
Tom, your speakers are somewhat low in sensitivity, meaning they do take right much power to come to life. We would suggest you try another pair of speakers, just to confirm the Marantz is ok. It does have preamp out which would allow you to add a separate power amp, if you need all the HDMI connections, that might be a good way to go, if not and you just need a good two channel integrated amp, check out this article www.audioadvice.com/videos-reviews/best-integrated-amps-under-1000/ It sounds like you are hearing a lack of bass and warmth- one other small possibility is the gauge of your speaker cable. It should be 14g or better (the smaller the number the bigger) Thanks for watching
The NR1200 just has A and B speakers that will both play the same thing. If you are ok with that and both playing at the same volume level you could go that way. If you want independent volume and source, yes you need a power amp connected to the Zone 2 preamp outs, your speakers would then connect to that power amp for Zone 2. Please reach out to our team at www.audioadvice.com to find the best amp for you
We looked up your speaker and could not find their sensitivity rating. The specs just say to use 25-75 watts per channel, which means they should work fine with the NR1200. You probably want to add a subwoofer for the best performance. Thanks for watching
Actually, you have some very fine adjustments from 40Hz to 250Hz. There is a new model, the 1710 www.audioadvice.com/marantz-nr1710-slim-7-2ch-4k-ultra-hd-av-receiver
Hi, the NR1200 will drive the LS50's but you would benefit from more power. Chat with us on our website and we would be happy to give you some recommendations!
Yes that is correct, we always advise people to connect their gaming console directly to the TV and use eArc to get object based surround back to the AVR. Thanks for watching
seems okay for a spare room for cheap speakers. but come on the standard is 100w per speaker for decent music listening or tv watching. if you dont have hi db sensitivity speakers dont bother with this thing
most speakers are 88 db at 8 ohm, my speakers are 88db at 6 ohm and i run them with the The TechnicalPro rx55uribt which is about 55 watts a side and theres more than enough volume for decent music and movie listening. im just scared my neighbors and my moms bf might complain lol.
Great question! You could connect it for playback, but there is no record out on the NR1200. You could, in theory use the preamp outs, but you would need to turn off the speakers when you did that. Thanks for watching
I know there's a market for 2 channel home theatre but I don't get it. I really like the idea of the PM6006 but I understand how just an integrated amplifier today is kind of in no man's land. Neither pure audiophile nor versatile enough to be an all in one. To me a 21st century update of the old stereo receiver, that had a tuner, would be to replace the tuner with a streamer, add Bluetooth and run everything through the best possible DAC available for the money.
@@maxrider2887 Hah funny to see this old comment of mine. I bought the NR1200 a few months ago. Does that answer your question? (Hint. NR1200 audio section and PM6006 are the same.)
@@maxrider2887 Its the same amp. Nr1200 is PM6006 with some video capabilities layered on top. Everything you hear about the sound quality of PM6006 is also true of NR1200.
@@AudioAdvice thanks , i had a question, i have marantz sr 73 which is pretty old but powerful, its connected with my jbl l166 speakers and marantz drives it perfectly with rich mid and low bass, but when i tried connecting the new marantz nr1200 with the same speakers, the sound is beautiful, even more crispy and clear but less mid and low bass compared to marantz sr 73. I dont know why is this happening? Marantz sr 73 has 75 watts per channel at 8 ohms and nr 1200 has 75 watts per channel as well but why it doesnt come to power like sr 73 when connected ? Is there any settings i am missing on to ? Please help
It's a Pioneer elite sx-n30 ? lol I bet it has a Ti Aureus 830a dac chip I paid 799.00 for my Sx-N30 and it's amazing 2 channel class ab does everything this one does but no HDMI nice review I do like the dual subwoofer outputs and dual full range pre outs
Seems no bass management? Low/High pass crossovers? Similar to the DRA-800H in that respect I am guessing. Shame... would have otherwise been interesting.
@@lesporque Awesome thanks for confirming, hadn't spotted the manual for this yet. An advantage over the DRA-800H then (its manual doesn't have any mention).
@@vrqu You mean subwoofer crossover or the speaker crossover? I am confused. I own the Denon dra 800 and for crossover subwoofer options u can choose for example 80hz, 90, 100 110 and 120. BUT no crossover for speakers. no option for small or large either.
@@NewPSCity Yep I mean no high pass for the main speakers meaning they always receive all frequencies (as in missing the equivalent of a "small" option on a receiver).
It depends on your needs. the NR1509 is a 5 channel surround sound unit and the NR1200 is a 2 channel stereo unit. Similar performance sonically but identifying your needs is the most important factor in choosing between the two.
better deal bye marrantz sr 5014 or 6014 and put an power amps like emotiva stereo by output and you get more power and good sound i find stereo marantz the power is low and expensive
i do wish quality receivers makers would stop trying to make them as compact as possible. im ok with big bulky plus quality sound good air flow... and whats this no cool blue light marantz ? p.s. trashing the dumb ass surround sound, mistake. but... i dislike this style. ugly compared to old school marantz ugly as sin
just depends on the persons equipment i have new and used or repair equipment and never had an issue. maybe try better quality hdmi or speaker wires but seperate power wire from speaker wire or hdmi cable. or perhaps your have defective units all i use us crown amps and yamaha and klipsch along with whalfdale
Hell...in my day we were bombing the North Veetcong.....now they make Marantz ? What has happened to the world ? In the 70s my Dr. friend had Marantz gear...not made by Veetcong.
@@wade0955 Not all Americans want to bomb anybody. Most just want to live in peace and raise their family. It's the powers to be that are hell bent on destruction !
Would love to see more modern 2 channel stereo receiver's with hdmi
Yamaha has a few models that are like this one but they do not have HDMI I don't know what they are thinking over there at Yamaha
Onkyo TX-8270
@@javaman_54 cant get this anywhere in UK now.
@@jamesbarrick3403 denon dra800h
@@fearce139 Thanks for that reply... I looked it up. You do realize Marantz and Denon are like the same company nowadays? Anyhow the model you referred is priced same as this Marantz. Do you think the Denon sets that model apart from this Marantz? I like the look of the Marantz a bit more.
Really nice job of clearly explaining this unit. Best I've seen. I just purchased one for my shop, will be here tomorrow. Will be pairing this with a pair of KEF Q300's I bought 3 years ago and have been sitting in their box all this time. looking forward to powering this up and enjoying quality stereo music in the shop. Thanks again for taking the time to review this Marantz receiver.
Congratulations! You are going to love it.
How did it work out for you? Thank you!
Shite ain't they. 🤣
With the masses waking up to the joys of retro design and fashion, it is indeed heartening to see Marantz respond with their new receiver cum stereo amp.
Just picked up a NR1200 for my Def Tech BP9060.
Nice! Thanks for sharing
Looks promising for sure!
if he were here today,elvis would have had this receiver installed in his red velvet covered bedroom in graceland though he may have dispensed with it's streaming capabilities.with a stereo receiver like this marantz,any hound dog can rock out.
may I ask how it compares with Denon DRA800H?
Good question!
@@fearce139 I have heard both and I believe that speakers are more important. Both receivers are pretty good. I have Monitor Audio silver 50 but also tested KEF LS50 both perfect.
Loved the review. Please compare this to the PM7000N. How close is it to the more expensive unit? I won't be powering demanding speakers. I ONLY stream music. Thank you.
Exactly, im wondering what the difference is to the Pm7000N that costs so much more. argh their marketing
I've been waiting for their review. Haven't heard back from them yet.
I would like to know if the A/B connections are driven by 4 unique amps so that bi-amp speaker connections are a possibility?
hi, what device deliver better quality sound? marantz nr1200 or marantz pm 6007? I just care sound quality. thanks in advance
Probably the PM 6007. It is an integrated amp with toroidal transformer and rated to 4 ohm loads.
I want this one
Thanks! I've been seriously looking at this unit, and greatly appreciate your review.
It's an awesome piece! Feel free to stop by our website and read more.
I have this receiver and I absolutely love it! I gave it a few days to warm up and now the sound it produces through my ELAC Uni-Fi 2.0 UB52’s and my Polk RTi-A3’s is almost flawless.
Thanks for this review! How would you compare this to the Marantz M-CR612 for sound quality, say linked to a B&W 606.
Well you have a much larger transformer, larger audio grade capacitors, dual DAC, larger heat sink, and a pretty good pre amp section. For sure the NR1200 is better.
Looking forward to receiving mine. If nothing else, it should be an option loaded pre-amp.
👍👍
I would love to see you review and compare the Marantz PM7000N to see what one could get for 400 dollars more! Love your reviews!!!!
7000N get 60W per channel …
this with klipsch rp-600m ?
John Smith How is it with the rp600m’s? I have Rp500m’s coming in the mail. Also already own a project debut carbon.
@@kotowski525 let me know how good is the phono of the rp500s
hello guys. this amp would be perfect for those speakers. first, the Klipsch speakers are VERY bright, too bright for most. The Marantz amplifiers have a very smooth, warm, and very rich sound signature, which would mate really well with bright speakers. I think the NR1200 would roll off the high end quite well so that they are not fatiguing. This is a great question to ask because the synergy between speakers and amplifiers have a LOT to do with how they will sound. If you want something even better sounding, without the HDMI, look at the Marantz PM7000N. Much better power section, BIG torrodial transformer, and beefier aluminum rails to dissipate heat. It's a lot more amp for about $400 more. Let me know how it works out.
Thanks for the review Audio Advice. I currently have a pair of B&W 603 speakers and was considering pairing it with a Marantz NR1200. In the review you mentioned the the B&W's. Would recommend the combo? And if not, which stereo receiver would be a good alternative with comparable features? I'd like a phono input, hmdi and tidal streaming and plenty of poke to power the 603's.
Hi, have you finally bought the NR1200? I have the same B&W speakers and I was wondering how the receiver drives them? Thanks!
04:18 so the first listening mode on this 2 channel stereo receiver is called...wait for it...stereo
You're missing his point, Thom...what "stereo" mode means on these stereo receivers -- and I own an Onkyo -- is that the tone controls are IN the circuit, as opposed to switching the PURE or DIRECT modes on...
@@scotta3192 If I'm planning on running an external amp, which mode should I use.
@@ArthaxtaDaVince777 That wouldn't have an effect on anything.
Does Yamaha own marantz they have a “pure direct” function as well. I guess I can google it.
Edit. Just read that denon owns marantz
wade0955 ok thanks
Short version. Everything is owned by the Chinese state. Get used to it.
@@RasheedKhan-he6xx Priceless comment! 😂😂😂😂😂
@@RasheedKhan-he6xx Not everything, I'm still using knifes and forks. I'm just waiting for chopsticks to be mandatory.
Polk purchased Marantz a couple of years ago.
Bought the NR 1200 few days ago. I'm using it mostly as a 2 Ch system for music steaming in my room. Happy with the performance of this lil beauty. As this is my first AVR bought, as all my previous gears were mostly separate , CD player, a stereo amplifier, I would like to ask, is there any way I can do to boost the bass of this NR1200? Can I add in a power amp, stereo amp to pair with this NR1200?
Yes, that is a nice unit. And yes, the NR1200 has preamp outs so you can add a bigger stereo power amp and use it as a preamp. If you have one laying around, go that way, or reach out to us for some suggestions.
@@AudioAdvice thanks alot. Appreciate your kind advice ❣️
Great review!
May I ask: What do the Preout jacks do ? I just got the "cousin" to the Marrantz unit - Denon DRA - 800H . I'm looking to connect my Audio -Technica TT (LP120X BT USB ), to both the Denon Phono connection using the Phono Preamp AND connect the TT to my Tascam CD Recorder in order to record CDs without having to switch connections form the Denon to the Tascam unit. I have a Schiit SAGA+ , mini Preamp - Switcher which has 5 inputs (all RCAs ) to 2 outputs. At present , I have my Tascam CD recorder sending digital out signals via a Toslink digital cable to the Denon (Wow - what a difference when playing CDs instead of via RCA connects ), directly. I also have 2 other pieces of equipment - Teac CD/ Cassette / USB player and a TEAC Dual Cassette deck connected to the SAGA+. Simply select which input you want on the SAGA , and it is set to send out puts 1) to the Denon and 2) to the Tascam CD recorder..... So, I could switch the connections from the TT to the Line inputs on the SAGA which would allow me to record CDs from the TT. But that would require disconnecting the TT from the Denon Phono connection and then connecting it to the SAGA+. Schiit Tech recommended connecting the Denon's Preouts to the SAGA+ , thus avoiding the switching the connections. The TT does have ability on the rear to switch from Phono or Line Out output. Bottomline: will this work ? And , kindly explain the purpose to the Preouts. I do have a Sub Woofer connected to 1 of the 2 Sub Preouts on the Denon. THX for any advice, much appreciated.
Great review! Your thoughts on pairing this amp with B&W 607's?
did you get any clue about it? I'm planning to get this Marantz to a B&W Cm7, would love to know more, used Marantz old receiver on a pair of B&W CM1 before and it was great.
I just don't get it. It is and AV receiver and it is now accepted by audiophiles because it is only 2 channel . So I didn't make mistake for buying sr 7013 instead of pm7000n for music.
has to be, has to be SILVER. actually I just bought a Cambridge for that reason, not lookin at ugly every day.
Black is beautiful.
Bluetooth is only A2DP not APT-X. And when I try to play from my phone through the receiver the sound lags behind the picture and I can't find how to fix it. The Audio Delay adjustment in "Settings" lets you increase the lag by up to 500ms which in my case is no help at all.
I wonder if output caps can be upgraded to Jupitor copper in wax and bypassed by Dueland .01 silver??
How would you compare the Marantz NR1200 to the Denon DRA-800H for sound and is it worth $100 more. Thanks
thats what i'm asking myself too...
@@wade0955 can you expand??
@@wade0955 Thanks...now I am erring back to a stereo amp, like the yamaha a-s series...not sure I'll notice any "hifi" difference...
wade0955 Marantz nr1200 is better then pm6006 in audio quality only?
@@maxrider2887 No, the PM6006 has a toroidal transformer, has much thicker aluminum heat dissipation rails, and overall has a beefier amplifier section. However, no subwoofer output, outdated DAC, no networking functions, no radio tuner, and no HDMI switching. That being said, if you are not going to drive speakers that are not efficient or demanding with power, you will be just fine. You should wait for the new version of the PM6006 which is the PM6007. It will have a subwoofer output, upgraded DAC, and 20% more powerful for the same cost. If you are just wanting to use it for audio, go with that one over the NR1200. Good luck.
Does this amp works with B&W 606 speakers?
Kalluri- The NR1200 will drive the B&W 606 in a normal-sized room just fine.
Nice reviews. These are really hard to find new now.
Really?
@@CrashCarson14 I went to 5 or 6 web sites and they all said not available. Some did have a date in Nov for getting them in.
Thanks for the greatest review :)
I’m going to be running a couple of polk tower speakers, and a subwoofer, listening mostly to music. In stereo mode will the subwoofer be active?
Yes, you set this up on the unit and the crossover frequency. Hope this helps and thanks for watching
Does it have enough power to power up the ultra bookshelf speaker?
Wondering that too!
I am running Paradigm Monitor 3 speakers and the Marantz does not have enough power unless you turn it above 60. I purchased an external power amplifier to drive my speakers.
I have 20 year old NHT Super Two and SB1s...how will this receiver sound with those speakers? Should I also invest in a subwoofer?
Are you running both at the same time, if so, it might not have enough juice for a larger space. Those were not easy to drive speakers. Please feel free to reach out to our team at www.audioadvice.com to help find the best power for your NHT's. Which were very good in their day!
the phono is good for the Pro-Ject Debut Carbon DC Turntable?
The price of these are high at 600$, what's your opinion on the Onkyo tx8260? I hear that the Onkyo has humming sounds when you are up close to it.
We have not experienced that.
Is is possible to use notebook as a source for movie? How to connect notebook, marantz and external monitor together?
Yes you should be able to. Chat with our team at audioadvice.com if you need help connecting things up!
Great review, on SQ only, how does this fair against the CA CXA81?
The Cambridge is better sounding but costs a lot more. Thanks for watching.
Hello! If I go with the NR1200, would I no longer need the NA6006? I'm upgrading from a NR1403, that is starting to cut out on me intermittently. I only stream music and want to maximize my streaming quality. Thank you.
i think so. it has streaming services built in
Would four Polk RM1300 satellite speakers and a subwoofer work well with this receiver? My 5.1 Onkyo died and I want to go back to a two channel stereo, but I want to use the same speakers. I appreciate your feedback.
Yes, that would be a good match up. Thanks for watching
I have a marantz . They work really well as pre amps. I use one with a studio Halfler P7000 . It murders the chip amp alone in SQ and grunt. Chip amps sound jittery especially on horns. I would pick up a used marantz reciever and say a crown microtech. It will murder this thing , guaranteed in every fashion. I use JBL 580 and have a video Genelec /JBL Studio 580 II.
Great review!!
How can I connect a Microphone to this receiver?
Thank you. You would need a microphone preamp. Our advice would be to proceed with caution. Most home speakers are not made to handle using a microphone unless you keep the volume reasonable. Thanks for watching.
do you work for marantz ? what do you mean by MINI brands ?
Waiting for DTS VIRTUAL surround on two channel.
Does anyone now if there is a difference in sound compare to a denon at the same price range
Conventional wisdom is Marantz is slightly sweeter and more musical while Denon is more punchy.
@@RasheedKhan-he6xx I have Denon DRA 800H + Monitor Audio silver 50 (but tested also Marantz and KEF LS50) Marantz is more clear/crisp but Denon is more natural and less fatigue to listen.
Are the first generation klipsch fortes efficient enough for the 75w in 8 ohms?
Without a doubt! Thanks for watching
Can't make up my mind between this Marantz NR1200 and Onkyo 8270, the spec and price are very similar. Any suggestions, my speakers are KEF q900.
Andreas Keck Get you the Pioneer elite Sx-N30 they use to be 799.00 now down to about 300 bucks lots of class AB power very underrated I have a full re Jew in my channel of it and it has 2 full range preouts to add 2 separate power amps and 2 preouts for powered subwoofers I have the marantz also The Pioneer has a very rich warm sound signature with double the bass output of others in its class even in direct mode it has bass
I'd love to try the Kefs I have the q100 and love them check my channel out
i think onkyo is better but they dont last run way to hot, enough keep it in a air conditioned room or throw a big fan at it for longevity or just go with yamaha. i have old mid and new avr from yamaha and they all works still
Johnny Bravo Yamaha is good but I was disappointed with the newer yammy As801 my yammy ax497 from 2010 was much better I bought the Pioneer elite sx-n30 for 799.00 a 100 bucks difference than the Yammy as801 Love the Pioneer and that's coming from a yammy fan since 1989
This might be exactly what I was after, I wonder, can the zone 2 be used to bi-amp the speakers? I was looking for a stereo receiver or a 3 channel amp as I only really have room for the front speakers but so often the amps lacked HDMI inputs and any of the nice assistance tech.
did you consider the denon dra800h?? Did you decide on the 1200?
Only pulls out 210watts out of the wall so idk about bi amp
Yes it can.
How do you activate the external amplifier when my external amplifier does not have auto sense and the NR1200 has NO 12 Volt Trigger out?
By pressing the power button.
@Audio Advice, will this be combatable with the KEF LS-50 Meta? Thanks
In a smaller to mid sized room yes, the LS-50 Meta is only 85db sensitivity, so the more power the better. Thanks for watching
room correction and this thing would be great. Oh and fixing that "house sound" slow rolloff filter as per ASR measurements.
X A, what do you mean with “house sound” slow rolloff filter?
@@robhoogland01 Speculating based on these measurements:
www.audiosciencereview.com/forum/index.php?threads/review-and-measurements-of-marantz-av8805-av-processor.6926/
X A Thx
I`m here to ask the Internet for some help! I`ve got the NR1200 paired up with the Wharfedale Diamond 12.2 speakers and the quality is ...disappointing to say the least. At high volume (50% up) it`s reasonable (by no means good), but at lower volumes it sounds like my Google Home speaker...with no exaggeration. What could be the problem? It`s been sat on the shelf for about a year cause I can`t stand the sound of it. I`ve checked all the connections and adjusted the sound settings with little improvement. Do I need better speakers ? Should I add and AMP ? Could it be a faulty product ? Thanks in advance.
Tom, your speakers are somewhat low in sensitivity, meaning they do take right much power to come to life. We would suggest you try another pair of speakers, just to confirm the Marantz is ok. It does have preamp out which would allow you to add a separate power amp, if you need all the HDMI connections, that might be a good way to go, if not and you just need a good two channel integrated amp, check out this article www.audioadvice.com/videos-reviews/best-integrated-amps-under-1000/ It sounds like you are hearing a lack of bass and warmth- one other small possibility is the gauge of your speaker cable. It should be 14g or better (the smaller the number the bigger) Thanks for watching
@@AudioAdvice appreciate the response, I`ll try your suggestions.
Sir Do i need external Amp if i want 2nd pear of Speakers for Zone2 on B named output? Thanks
The NR1200 just has A and B speakers that will both play the same thing. If you are ok with that and both playing at the same volume level you could go that way. If you want independent volume and source, yes you need a power amp connected to the Zone 2 preamp outs, your speakers would then connect to that power amp for Zone 2. Please reach out to our team at www.audioadvice.com to find the best amp for you
@@AudioAdvice thanks so much for the reply.yes I want to continue independent.
Really a killer integrated DAC wifi coffee making receiver.
HAHA! Good stuff. How do you take your coffee?
Audio Advice room for creamer
Have you ever reviewed the Marantz MC-R612?
We have not, thanks for watching.
Would this go well with Q acoustics 3030i’s?
We looked up your speaker and could not find their sensitivity rating. The specs just say to use 25-75 watts per channel, which means they should work fine with the NR1200. You probably want to add a subwoofer for the best performance. Thanks for watching
This match focal chora 816 ?
Can you set your speakers to small or large with this receiver?
Actually, you have some very fine adjustments from 40Hz to 250Hz. There is a new model, the 1710 www.audioadvice.com/marantz-nr1710-slim-7-2ch-4k-ultra-hd-av-receiver
How does it compare to Yamaha R-N803? Just be curious.
Pham Cong Dinh the dual sub out is not on the n803, am guessing this gives you a warmer sound vs a neutral Yamaha sound. I betcha it gets bloody hot
Sounds better then R-N803d. Clear highs, balanced mids and bass. Yamaha is flat.
Can anybody advise if this Marantz have A/B class amplifier or D class.
A/B
@@markbauwens is that better than D for sound?
Both, A/B and D are good for sound. Power consumption A/B is higher than D because D amplifier principle is more efficient
@@RainbowCharade AB is smoother, higher resolution, D is deeper and more full bodied.
Who makes a comparable feature unit for around $1000 that’s better than this that has a sub output also! And how good is the Marantz m-cr612?
Onkyo TX-8390
The phono amp is very very simpel and set up around 1 opamp the NJM8068. That it uses Marantz HDAM modules is pure BS! However, it sounds pretty good.
Noticed no LOUDNESS button for bass compensation at low levels. All the integrated amps have it why not this?
Is this an ad or a review?
AD
Hello, this will drive LS50? It only has 75 W
Hi, the NR1200 will drive the LS50's but you would benefit from more power. Chat with us on our website and we would be happy to give you some recommendations!
I saw the HDMI out is capped at 60hz though.
Yes that is correct, we always advise people to connect their gaming console directly to the TV and use eArc to get object based surround back to the AVR. Thanks for watching
@@AudioAdvice Thanks!
seems okay for a spare room for cheap speakers. but come on the standard is 100w per speaker for decent music listening or tv watching. if you dont have hi db sensitivity speakers dont bother with this thing
most speakers are 88 db at 8 ohm, my speakers are 88db at 6 ohm and i run them with the The TechnicalPro rx55uribt which is about 55 watts a side and theres more than enough volume for decent music and movie listening. im just scared my neighbors and my moms bf might complain lol.
can i connect cassette deck to this marantz nr 1200?
Great question! You could connect it for playback, but there is no record out on the NR1200. You could, in theory use the preamp outs, but you would need to turn off the speakers when you did that. Thanks for watching
Thanks
I wonder if the new Marantz Stereo 70s slimline replacement for this will have 8k/60hz/ 4k120hz 40gbps inputs? Lol
I know there's a market for 2 channel home theatre but I don't get it. I really like the idea of the PM6006 but I understand how just an integrated amplifier today is kind of in no man's land. Neither pure audiophile nor versatile enough to be an all in one. To me a 21st century update of the old stereo receiver, that had a tuner, would be to replace the tuner with a streamer, add Bluetooth and run everything through the best possible DAC available for the money.
Well say
Marantz pm6006 vs Marantz nr1200
Who win in audio quality ?
@@maxrider2887 Hah funny to see this old comment of mine. I bought the NR1200 a few months ago. Does that answer your question? (Hint. NR1200 audio section and PM6006 are the same.)
Rasheed Khan what is the update of those two amp ?
@@maxrider2887 Its the same amp. Nr1200 is PM6006 with some video capabilities layered on top. Everything you hear about the sound quality of PM6006 is also true of NR1200.
Rasheed Khan than i go with the pm6006 uk Edition
Hi i am planning to buy this , will it be enough to drive my jbl l166 big speakers? Just wanted to confirm , please let me know
It will, but just barely. Those speakers come to life with more power. Thanks for watching
@@AudioAdvice any suggestions apart from nr1200 ?
@@akashbohra6798 This is more $$$ but would do a far better job. www.audioadvice.com/home-audio/components/integrated-amps/peachtree-nova150-amplifier
@@AudioAdvice thanks , i had a question, i have marantz sr 73 which is pretty old but powerful, its connected with my jbl l166 speakers and marantz drives it perfectly with rich mid and low bass, but when i tried connecting the new marantz nr1200 with the same speakers, the sound is beautiful, even more crispy and clear but less mid and low bass compared to marantz sr 73. I dont know why is this happening? Marantz sr 73 has 75 watts per channel at 8 ohms and nr 1200 has 75 watts per channel as well but why it doesnt come to power like sr 73 when connected ? Is there any settings i am missing on to ? Please help
@@akashbohra6798 The SR73 has a much beefier power supply. Did you get the NR1200 from Audio Advice?
It's a Pioneer elite sx-n30 ? lol I bet it has a Ti Aureus 830a dac chip I paid 799.00 for my Sx-N30 and it's amazing 2 channel class ab does everything this one does but no HDMI nice review I do like the dual subwoofer outputs and dual full range pre outs
And I don't want HDMI or BT.
@@BigEightiesNewWave Marantz PM6007
Seems no bass management? Low/High pass crossovers? Similar to the DRA-800H in that respect I am guessing.
Shame... would have otherwise been interesting.
I looked at the manual and it has a variable crossover in about 10Hz increments.
@@lesporque Awesome thanks for confirming, hadn't spotted the manual for this yet.
An advantage over the DRA-800H then (its manual doesn't have any mention).
@@vrqu You mean subwoofer crossover or the speaker crossover? I am confused. I own the Denon dra 800 and for crossover subwoofer options u can choose for example 80hz, 90, 100 110 and 120. BUT no crossover for speakers. no option for small or large either.
@@lesporque Can u set the crossover frequency for the speakers AND the subwoofer?
@@NewPSCity Yep I mean no high pass for the main speakers meaning they always receive all frequencies (as in missing the equivalent of a "small" option on a receiver).
This or the Yamaha?
IC used in this?
Yes, a lot.
Can anyone tell me if this will push 2 hp2-15 cerwin vega
Cerwin Vegas are very efficient loudspeakers. Will power them with no problem but . you may benefit from some additional power.
@@4paulseyes thanks went with the 1609 and a crown xls 1002
they tested it with stereotypical audiophile music only lol
18pounds is light
1509av or this one ?
It depends on your needs. the NR1509 is a 5 channel surround sound unit and the NR1200 is a 2 channel stereo unit. Similar performance sonically but identifying your needs is the most important factor in choosing between the two.
@gillan64 Yes.
@gillan64 oh ok. I m ordering the nr1609
Decent pre amp for me... I would never expect to run dedicated speakers with an avr.
this is just another TV receiver
Exactly...HDMI and BT I lost interest. BT is garbage Just give me 2.1
@@BigEightiesNewWave I am fine with 2.0 with good speakers you don't need a bass box
It has 2 subwoofer preouts. It IS 2.1.
@@grahamthedark Couldn't be further from the truth. No sound system on this planet that doesn't benefit from a subwoofer.
@@thomasc1753 oh thats strange, I thought it was a 2.2
Please anyone
Made in Vietnam
Thanks for watching
better deal bye marrantz sr 5014 or 6014 and put an power amps like emotiva stereo by output and you get more power and good sound i find stereo marantz the power is low and expensive
i do wish quality receivers makers would stop trying to make them as compact as possible. im ok with big bulky plus quality sound good air flow... and whats this no cool blue light marantz ? p.s. trashing the dumb ass surround sound, mistake. but... i dislike this style. ugly compared to old school marantz ugly as sin
Never buy an amp or receiver with HDMI ports, unless you enjoy hearing hums or buzzing sounds from the 60hz transformers.
@ TruthSeeker - Complete Bullshit!! 😂
just depends on the persons equipment i have new and used or repair equipment and never had an issue. maybe try better quality hdmi or speaker wires but seperate power wire from speaker wire or hdmi cable. or perhaps your have defective units all i use us crown amps and yamaha and klipsch along with whalfdale
facepalm!
lmao what, I use a cheap onkyo AV from 2008, no buzz or hums.
dont like new design
They are shite. Muffly, no dynamics. Makes your speakers sound like the tweeters have fallen out. Sold. Mine on Ebay.
Wow, sorry you had a bad experience, did you contact your dealer? Sounds like something was seriously wrong
Why would I buy 2Channel when I want Surround sound?
2 Channel Is stereo.. Buy an AVR
You wouldn't ... unless your stupid !
Hell...in my day we were bombing the North Veetcong.....now they make Marantz ? What has happened to the world ? In the 70s my Dr. friend had Marantz gear...not made by Veetcong.
@ Buff Barnaby - You just got old and then the world passed you bye... 🖐
@@wade0955 Not all Americans want to bomb anybody. Most just want to live in peace and raise their family. It's the powers to be that are hell bent on destruction !
What has happened is the rich getting richer, the bottom line. Make as much money as they can, same old song and dance.