Threadmilling on a manual lathe
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2024
- I had work recently that required some ID threads with basicaly no leadout. I did them with a regular tap, followed by a bottoming tap that had all its lead ground away. As the material was 316 stainless, it was a rather painfull experience ;-)
Threadmilling could be a very good solution, as it is almost completely independent from the rotational speed of the workpiece.
Here is what I tried, with a heavy duty routermotor mounted to my lathe.
Also: Shopground threadmills, deburring and coldblue-application.
Visit my website for FAQ, a list of my machines, my products and some project documentations:
gtwr.de/
Consider supporting me on Patreon:
/ stefangtwr
I post very regular on Instagram:
/ stefan_gtwr
#practitioner_of_the_mechanical_arts - วิทยาศาสตร์และเทคโนโลยี
![[TH] Esports World Cup : Knockout Stage Day 1](http://i.ytimg.com/vi/ES-vr-FarFg/mqdefault.jpg)
![[UNCUT] ที่นี่ที่แรก ปู - หาญส์ พูดถึงมหากาพย์หนี้สิ้น I คนดังนั่งเคลียร์ I 10 ก.ค.67](http://i.ytimg.com/vi/KDNA9DZ0p4U/mqdefault.jpg)
I would have thoroughly enjoyed working side by side with you back in the day. I like the way you think. 100% Great video.
I love it when our favorite YT machinists contribute on the rest of the community's content. We have a pretty great little corner of the internet with some pretty great people. You're a stud Pi!
@@shirothehero0609 Stopped watching TV time ago ! Dont even have a TV anymore...
With all this content coming, I watch only this community
@@Mtematiks I have a TV that I only use for watching TH-cam on :-)
Thanks Joe, thats an honor hearing that from you :-)
Agreed on all points Joe!
"Should fit... or else I will edit it"
That's the youtube spirit
Seems like we have a similar strategy on deburring:
Step 1: remove blood stains
Step 2: debur the part
Step 3: check part for blood stains. If any found, repeat at step 1
Im a hvac guy by trade. When Im knocking tin, I bleed.
Totally agree, I cringe when I see home gamers (and some pros), checking a broken edge with their pinky to see if its still sharp. lol
@@1ginner1 at least they check. 😅
Every shop I've been in, everyone leaves sharp edges or burrs to save time and cut corners.
Cutting corners by not cutting the corners?
I love that the thread just stops with no run out! Such a cool look.
The reverse set-screw interference fit bit is a nice trick.
Will be adding to my designs.
Same system as used on my 40 year old drill press head.
Referred to as "Jack Screws". I use them all over the place
Again, the magic happens, Awesome!! I learn new stuff every time. Thank you for all the time you put into these quality presentations
Hi Stefan. Nice to see the solution to a very old problem for which the model engineer's Guru George Thomas had a much more complex solution. Folks, when you slit into a previously bored hole there is a tendency for the bore to close in. Stefan's jack screw is a very simple and elegant solution. BobUK.
"I'm not the first guy to do this". Stefan, by now I would think just about anything that could be done with a manual machine has been done. IMO the most impressive things done on manual machines are turbine impellers that were done pre cnc. And the interrupted threads on the breaches of large naval rifles. Given the pressures they had to withstand they had to be absolutely perfect.
Now if you had a way to run your cross slide at the proper ratio you could make chuck spirals. And I know they had set-ups to do that on manual lathes. Setting the router at the center of the included angle you could also cut buttress type threads.
Not germane to threadmilling but in the past I experimented with making roughing mill cutters out of taps. Grind a relief angle on the top of the teeth that gives a flat wide enough that all the flats are longer than your taps pitch. Grind a secondary relief angle. Works fine on softer materials. Not so much on tool steels. I worked with some machinists from Germany and they told me that in the 50s they used to have to make end mills out of twist drills.
I would like to hear more about the difficulty associated with cutting the interrupted threads for naval guns. Can you point me in the right direction to more information?
@@BravoCharleses
Sadly no. To be honest I don't know if they where single, double or multiple lead threads. I suspect that multiple lead threads would be weaker simply because of the lead angle of the threads.
There's lots of good guys posting on youtube. But Stefan in my opinion is the most interesting person to listen too. Totally engaging, supremely knowledgeable, but extremely humble...A pleasure to watch.
Stefan is one of my favourites. I have to choose between Stefan, Joe Pie, Robin Renzetti and Tom Lipton. There are others of course. The steadfast adherence to practical as well as accuracy and precision is truly an art form and is common among them all. When I want a chuckle, as well as these qualities, I turn to 'This Old Tony' as I'm sure most who are interested in this subject will do. Abom79 is another stalwart - a big amiable kind hearted giant of a man. This is a special community, revelling in an under regarded set of skills. Hand to eye accomplishment is the best medicine for what ails thee.
After telling the story about the maker who stood by his cannon for the first shot, then Stefan sanding and rubbing like mad again and again, he says "not crazy .." and keeps on sanding. Gotta love the guy and everything he does. Kudos Gotteswinter !
The aesthetics of your designs are just as amazing as the tolerances Stefan. Gorgeous work as always
Wonderful video. Back in the time frame 1880 (and even before that) when electric motors were rare or unavailable there was the English Holzapffel ornamental lathe company .The double ff is no typo. The lathes were foot-powered. They had all kinds of attachments and extra-axis devices. Among the things they would do is mill threads. They would also allow you to e.g checker-pattern a piece or inscribe all kinds of patterns on work. The last Holzappfel was sold in 1920 or so. If you look under "ornamental turning"you will find quite a lot of info.
I've never seen this before! Beautiful little adapter and spectacular results. Seems so much more controlled and safer than single point threading. To me as an armchair machinist fan, you guys cutting threads always looks like some kind of ballet with chainsaws.
By far one of the most interesting machining videos I've ever seen, very intriguing, thank you so much Stephan !!
In my father's shop back in the seventies we used to do the final grind on hardened threads with a diamond embedded linen phenolic wheel mounted on a tool post grinder. It wouldn't take much off but it made the threads extremely slick. It was set up much like what you're doing except the cutter and/or lap was mounted on a mandrel. The angle could also be adjusted for clearance on larger threads by tilting the spindle up and down in the front. Fun stuff! Thanks for the video!
Its always nice to see a true craftsman doing his stuff Being an engineer ( millwright) for nearly 50yrs I know quality when I see it Great video Stefan Please keep making them Pete UK
Putting a router on a lathe's toolpost as a milling attachment is a neat trick. A homemade 4-flute 2mm thread mill bit that doesn't break without magnification is really impressive. I would stick with single flute D-bits below 4mm.
I've been studying threads for 50 years since I worked on Brantley Helicopter rotor parts with old 4A & 4B threads called out on some of the rotor drawings. That is tighter 3A & 3B but not an interference fit. The reason for the radius at the root of the thread and the tread relief is to prevent stress concentration.
We may worry too much about thread forms. Mauser rifles all were made with Whitworth (58-degree) threads, usually 12 TPI. In the US, we rebarrel them with barrels having 60-degree threads almost every time. They shoot the same no matter the barrel thread.
Very happy to see these programs.Thank you
By using this same router setup with 2 flute, carbide wood-routing bits, you can make amazingly-accurate lathe cuts and deep grooves in rubber and soft urethane bars. I've used this on motor mounts and suspension bushings etc.
The trick is using compressed air for cooling along with a vacuum cleaner. Love the video!
Seems like you can cut knurls with a setup like that too. Reverse the feed without reversing the chuck direction.
Awesome ... love the slide show format showing the steps of making the tool holder!
That is really interesting! Done threadmilling on a cnc mill but never thought about doing it on a manual lathe. Allows for so many possibilities! Thanks for sharing!
That's very cool! I love it!
Please keep experimenting!
It looks like a very unique and useful approach for manual machining!
Thank you for all of the work that goes into making these videos!
Greatly appreciated! :)
Very nice Stephan.
I find lots of little embellishments you do usefull to learn.
Like using a set screw to open a coller clamp that allows for a precise fit without over torquing a small fastener.
Like Filing a precise 45deg bevel junction on an inside corner.
Instructive, thank you Sir.
Cannon blowing up < bad deburr for sure.
Also, the set screw 'trick'/gimmick is frickin brilliant. I've never thought of that. So simple and amazing. Damn good thinking!
Yes the jack screw a great idea. It's also a good technique for mounting one plate to another with some degree of adjustability to allow them to be co-planar (e.g. DRO scale mounting, to a casting). A jack screw plus a tension screw in 3+ corners allows for a lot of freedom of adjustment.
Very nice work Stefan! love the threadmilling.
ATB, Robin
Woah! It’s Robin! Love your channel!
@@orionfleming6783 Thanks!
Hahaha! Love the speed up with the abrasive sponge!!! Some good exploration shared... good stuff!
Che meraviglia!!! Complimenti! Mai visto una lavorazione in questo modo. Ciao
I have a Kress on my home cnc router, nice and reliable. Excellent presentation as always Stephan.
This was really interesting to watch and the results were great. Learnt so much. Thanks for sharing
Very cool, I always appreciate your ideas and how you explain everything.
OD turning with a thread mill, very impressive Stefan.
Thanks for sharing, regards John.
Thank you so much for this- I very much enjoyed it and found it to be very informative. Looking forward to trying it out!
I am a simple man, I see a Stefan Gotteswinter video; I smash the like button.
Very epic! You have convinced me of this as a must have. Thank you!
Excellent, well thought out, and always very interesting, thank you Stefan :)
Another stunning result - 👍😎👍 I definitely enjoyed
You are so talented! I enjoy your videos and the many skills you display.
Nice options Stefan, fun to watch the experiments.
Thank you Stefan for another great video!
I have a similar setup and have found that it works great for trepanning. I use an end mill in the die grinder and rotate the lathe chuck very slowly. It's much faster than using a conventional trepanning tool and there are no issues with chatter.
i just thought about trying that. thanks for the heads up!!
Thanks Stefan. I can see where this method would be especially good on internal threads.
Very cool! I really like the method you used to cold blue those parts.. They came out really nicely ! Thanks for the inspiration..
Hi Stefan,greetings from Ireland, great video, as always i find your video's interesting and informative, keep up the good work.
Intriguing concept, enjoyed watching as well gaining some knowledge.
This gave me some great ideas for cutting small threads. Thanks!
Greeeaaat.....like I really need another thing I wanted to build for my lathe. Thanx for posting this.
Great video, Stefan.
Sehr interessant und informativ.
Gday Stefan, What a great setup, the new grinder is really working out great, the small tool you made is amazing, I’m afraid my eyes would be no good for doing things that small, really enjoyed this video, thank you mate, take care. Matty
👍 thanks for sharing. Love the chip breaking idea for plastics!
Great video. Another tool added to the to build list. Great stuff
Very interesting and informative presentation. Thank you for sharing your experience with us all. 👍🇦🇺🦘🔭
Who says controlled OCD is a bad thing?
I swear I smelled the PVC cutting when it started!
Well done Stefan, you are inspiringly! Thanks.
Nice job as always Stefan. Would love to see a bit on the grinding of the tools, I think this would be really interesting and a good reason to show off your new T&C grinder. Well done and thanks. Jon
I just stumbled onto your channel, and I must say I am very impressed with your content and production quality. Thank you for sharing your wisdom. I may not become a machinist but can take some small snippets from you into my studio.
I soak up everything you tell us, Stefan and, if I can't apply it straight away, I store it for future use. One thing though which I have found with thread milling tools, is they generate a different form to the shape of the cutter. It's the combination of the tool rotating on an axis parallel to the work piece's axis but interpolating a spiral. The front of the cutter generates a different flank angle. The true thread form should be normal to the helix angle of the thread so the form of a thread milling tool really needs to be modified to take this into account. The trailing side of the form is fine as it is in clearance but the leading side will back cut the flank to form an angle larger than required and the radius will also be generated larger. For threads which are large compared with the diameter of the tool, this is negligible but for very small threads relative to the size of the cutter, it is significant. I have a thread milling cutter for an M2.0 thread which has an OD of Ø1.6mm (the tapping size for the thread!) which will cut a thread either tight (crest of screw same size as major diameter of ID thread) or it's too loose because the female thread form is too wide. Are you able to CAD model a cutter which will generate the correct form when interpolating a helix?
Stefan and Renzetti video in one weekend? Awesome! Learned a ton from you.
I am happy you fastened a bit the videos, !
I like your new style of filming/going of the videos
That was fascinating. There were a lot of good ideas in there.
Incredibly interesting Stefan👍👍
Nice to see not only I abuse this scratch proof sheet... ;)
Awesome project and a wonderful demonstration.
There are many machinist (good ones!) that are funny, fascinating and brilliant - but I think your videos are always a treat and I look forward to these... :) Thank you!!!!
I liked and subscribed just from the title alone.
very good video..thanks for your time
For right hand external threads, tilting the live tool down at the chuck end should give proper lead angle. A little more restrictive for deep internal threads of small bore. Nice work Stephan and one of my most enjoyed channels.
Sehr interessant! Selbst als Mechaniker sieht man immer wieder neue Techniken! Gut gemachtes Video, gefällt! :-)
Watching Stefan deburring a part is like watching an episode of Bob Ross on TV. You listen to a calm voice explaining how simple it is, doing a bit of magic here and there, and yet you get a totally different result when you try it yourself...
And we dont mistakes, only happy accidents :)
love your videos, thanks
This is actually an awesome idea... My lathe doesn't have Lot of horse power and doing it this way would work so much better. Thanks for the idea!!
Really interesting Stefan!
Very interesting and instructional, thanks for sharing.
I just ran 24 parts that needed a 3/4”-32 internal thread to the bottom of the bore. Of course not on a manual machine. But it worked beautifully. Now I’m inspired to try milling trapezoidal left and right hand threads for a self centering vise build. Already located the thread milling cutter. This will also allow any thread pitch within reason. So a double start thread should be doable.
AWESOME !! I would not expect anything less, from the "Stefanator" ! lol
super star awesome video again Stefan!
Using that endmill on your lathe, you can hog out some serious material!!
Awesome work grinding those 4 flute mills! Getting the geometry right seems like a lot of fun.
Thank You Stefan....Excellent & something I will be doing. I plan to use this technique on hard wood containers with a threaded lid. Just for the fun of it....TM
Well there something you don't see everyday😀. Now you'll have to show us how to thread an endmill! 🤣. Thanks for the share! Super cool! 👍😎👍
What a great video. I just have to make one.
One thing that I, along with many others I suspect, have trouble with is cutting off. It seems to me that a small assortment of endmills would turn this tool into an almost perfect cutoff tool. Perhaps even a slitting saw could be used in it for cutting off.
If I make one I think I will use a reversible motor for maximum versatility.
I think this could be a very versatile tool to have at the lathe.
Can't wait until you start making your own ball screws with this setup.
If you set your parts on a paper towel after applying the activator, the bottom side may not get the full effect. I try to use a rack over a small container to catch any drips. If you flip them half way through the process, you can ensure the most even finish. A good cold blue finish is all about the preparation. Great video, and great design for the toolpost router, I am gonna steal the general shape, except I am also gonna build one for a TIG torch.
This video just kinda grinds on and on. Best use of an off the shelf high end grinder yet :)
I have both high quality optical microscopes and cheap video scopes. I put a video scope with built in display (about $49 if I recall) on a magnetic indicator base. I use it in my Emco super-11 and my Hardinge toolroom lathe. It gives a great view of cutter action if you need it. It is also is useful on the mill too. While the quality is not like a Leica scope it does keep your face away from the action. Don't under rate the cheap scope it works and other can see it. Great for demos.
I mounted a Dremel moto-tool on my Emco 30 years ago to spin and abrasive disc to cut Hastaloy X . I also had an air turbine with a multistage planetary to spin a slitting saw for screwdriver slots on a homemade gang tool CNC lathe. I also used a full speed turbine (50K or so) to spin very small PCB drills on the gang lathe too.
By the way Robin mispronounces Hardinge. He says Harding instead of Hardinge. I noticed you have adopted that too. The correct pronunciation ends with a sound like Hinge (like door hinge) but without the H sound. Please take no offense your English and your videos are excellent. I watch them all.
JY
I've been wondering about that for years!
thank you for the wonderful video. will be nice to do internal lead screw nut thread.....glad to see im not the only one to get the wrong pitch..
Excellent video.
"Then you have this 25.5km long chip rolling round inside your shopvac...which is not ideal." Come for the precision machining, stay for the dry humour. PS getting chips like that when machining PVC is just...wow! Got to try this.
Clever use of the counteracting screws in the clamp.
Stefan... I think you and your shop are located beyond the event horizon.... Peace out!
Nice work!
Excellent tips. I always learn a lot. I wish my German was as good as your English. I think I have to build one of these. You are starting to cost me money like Tom L.
Very good video. Food for thought. You keep driving us forward :-)
Or driving us into obsolete techniques ;-)
@@StefanGotteswinter Well today, everything but pushing buttons is obsolete I suppose. Not even buttons any more, but an iPad with finger gestures.....
Very good video
I use a phosphoric acid based "rust converter" for "cold blueing". It makes the same black oxide that soaks up the oil and prevents rust. Dunk it and let it sit in solution, dry it off and oil it. Pretty easy. $25 a gallon in Missouri. The brand name is Ospho. Good stuff and much easier to use and much less expensive.
Hi Mr. Stefan, Another awesome and very educational video!!! I am a bit of newer subscriber to your channel!!! I must say you have some very excellent, well detailed and very educational videos i have seen on TH-cam ( i also enjoy watching Adam Booth, Tom Lipton of Oxco tools, and Tubalcain (Mr Pete) as well as the Electrical/Electronics TH-cam creators). I am a hobby machinist (my regular and to pay the bills and hobby full time job is in the IT/computer data analytics field rather boring and straight-forward) and have been catching up on your videos during this pandemic and can honestly say i have honestly learned (at least) 2 or 3 things from each of your videos, either brand new or improving/adding to something i have learned in the past. I also feel your videos have the perfect balanced amount of science, engineering/manufacturing, art and humor! I look forward to seeing all and upcoming videos you will be releasing down the road! My very best to you and all of your family and loved ones throughout the rest of 2020 and beyond!!! also hope that everyone stays safe and healthy during the Covid-19 virus pandemic!!
Welcome!
I ordered some parts for my hot rod which were not finished very well so I chamfered and polished when i handed the finished and unfinished parts to my wife she said oh my the finished part feels soft as butter now
There was a study done recently regarding the life of a file used going in both directions vs lifting on the return stroke. The outcome was that there was very little or no difference in the wear on the file for either technique. I don’t remember where I saw this, but a quick search should bring it up. I have been deburring and chamfering for over 60 years and my files have shown no evidence of deterioration. I will say though, that they were never used on hard surfaces, which would probably dull them no matter the direction of application.
Great job !
If you get the polished inserts for aluminium they are able to machine HSS in the lathe. You can cut and shape thread milling and involute rack angled cutters with them to get the correct form then grind the cutting faces. VBGT work well.
Thank you for continuing to share your knowledge and experiences, I really appreciate your effort and wish you success and happiness in your endeavors.
Question: if you were starting over today, would you use a larger size Multifix or Tripan tool holder given your experience with the solid tool post?
Precise termination of the thread at the major diameter Stefan.
IMPRESSIVE.