Barnes 4WD Aluminum Tie Rod Install!
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2024
- UPDATE: Barnes raised the price but now includes free shipping, the Left hand thread side is also marked with a machined ring to make it easier to adjust. For 295$ and free shipping this is a great choice
Automatic discount applied! www.7slotcustoms.com/collecti...
7/8" Drill Bit: amzn.to/2uYmUOx
Barnes also sells a Aluminum Drag link, But i will wait until they have an over the knuckle (flip kit) drag link available.
Having an aluminum steering setup offers many advantages over steel, stay tuned for a video testing the differences!
When installing a new tie rod, it’s a great time to relocate the Steering Stabilizer Mount! amzn.to/2AjGU3h
Want to see how to drill and install the Inserts? Video Below: • JK Ruffstuff Tapered T...
Get Started Making your own videos! Heres the camera i use: amzn.to/2mPfLeT - ยานยนต์และพาหนะ
Don’t forget that a Barnes4WD and 7SlotCustoms offer 10% off using the code JKgear. Perfect time to install a raised Steering Stabilizer Bracket to prevent it from getting hit on the trail. amzn.to/2AjGU3h
JK Gear and Gadgets prolly long shot if you see this but I put synergy tierods on my 17jku and roughly 10months ago. I had a shop align it now I can get under there and wiggle my bar back and forth. My steering wheel is starting to have a bounce back when I slightly turn left or right now. My cooper stt pro are starting to wear every other lug. Any feedback much appreciated.
Jordan Carpenter it’s ok to have rotational play. Any other play is bad
I don’t have side to side play only back towards the rearend and to the front of the jeep. Just didn’t know if that was causing my steering to wanna jerk back when I change lanes. Synergy track bar is tight. This weekend putting on dual steering stabilizer see if that would help. Watch all your videos man love them! Thank you for reply!
And now it's not the same price at all..
Thanks for this video. I need to replace my tie rod and was just going to go back stock. But for a few more dollars I can get the Barns. I know it will be over kill with me just running 33’s, but I guess it can’t hurt. Please keep the videos coming.
Looks great can't wait to see how it works.
Not gonna lie. I’m just glad to see I’m not the only guy that wrenches on their jeep while wearing crocs.
Haha I love them
Looks like a solid upgrade!
Just used the JKgear discount code and got the entire Barnes4WD aluminum 1 ton kit. Can't wait!
Do you have a link?
Great video bro, you’re very detailed with your info, really easy to follow and understand, thanks.
Good install video. Looks simple enough.
Those small fenders are a great look!
Thank you!
Nice upgrade
It looks good. I’m glad we won’t be having to bend yours back anymore.
Haha foreal
Getting ready to do mine today
Came out sweet!
Go team Rugged hahaha that’s some great packaging. Nice tie rod
just purchased the front no drill kit great price also great videos
Wow! Killer price!
Doetsch offroad makes an aluminum tie rod and flip drag link that's also aluminum for 400 bucks !! If you get either or there only 200 bucks and there 1 tons as well with I believe lifetime warranty
I love the look of this.My Sahara is stock on 35s but it does have a 4 inch lift.Can install this on my Jeep or do i have to upgrade to 1 Tons? Looking forward to hearing from you
What are your thoughts on adding the falcon 2.2 steering stabilizer? I see the bracket only comes in 1 3/8 and 1 5/8.
Great stuff! Are you going to make Hella videos in Uwharrie?
Plan on it!
JK Gear and Gadgets hell ya can't wait
Go Team Rugged!
I gotta question? So the nut on my steering wheel box was lose AF why do u think that happened?
Wow. That price is rediculous. Great vid
It’s an amazing price!
GO TEAM RUGGED!
great video,, that tie rod looks super beefy,, do you think its stronger than a chromoly tie rod?
It depends, chromoly is reallllly hard to bend, but if you do then it’s bend for good. The good thing about aluminum is that it will bend if you hit it but bend straight back
JK Gear and Gadgets yeah and the aluminum will not be as heavy as the Chromoly
What is the width of just the aluminum rod? Trying to find out if I could use this in a custom application.
Great video and I love your channel and product influence. I just bought one for my 2007 JK Sahara. Question....If the endpoints fit, do I still need to drill out the C?
You should not have to drill out for the tie rod.
Wat it does really for the Jeep ? Does it make it a smooth ride ? Eliminate death rubble
That is some solid bang for your buck. Do the ends flop much? I have a synergy and it has soo much movement that it cuts out my hydro for a second when I change direction while is flops. Also teh boots on the Synergy come off constantly.
So far I haven’t noticed much flop (but it’s been one day lol) I know synergy has a ton of flop and the bends in the tie rod make it worse since it sticks out so far.
Nice! See how it goes. New tie rod has been on my to do list for a while. I Just hate spending money on parts to replace parts i've already bought once lol.
Haha same. At least you could sell your tie rod.
Can’t wait to see the torture test!
Won’t have to wait long!
Go Team Rugged!!!
This tie rod is 1.5 inches. Can I run the teraflex falcon nexus 2.2 stabilizer which has a mount for 1 3/8 inch and 1 5/8 inch?
Go team rugged!
Go Team Rugged!!!!!
Go team Rugged!
Stay safe
Can you order custom length for your zj wj knuckle swap
Go team rugged!!
Any idea if this will fit with 16” pro comp steelies?? Wheels have a lotta backspacing 4 1/4”.....
Hmm, you might have to call Barnes and ask. I know with my 17s the end is close to the wheel, not sure if it would hit or not with the 16s
GO TEAM RUGGED!!
Go team rugged radios!
Hey Ben, did you sell that bumper?
Go Team Rugged
Thanks for all of your videos. They are very helpful with my obsessive research.
A question for you. Are you still running the Barnes 4x4 aluminum tie rod? If so, would you recommend going aluminum for both the toe rod and drag link? Looking at the Barnes and Fusion. Not sure I should stick to chromoly.
Thanks.
Not running this anymore. I switched to one ton axles. I would still highly recommend it for Jk axles though
JK Gear and Gadgets
Thanks so much for the quick reply. You’re awesome!
Still running a 1 ton? Has it held up or should you have went with a 2 ton?
Go team Rugged.
What sway bar links are you running?
Ok I have a question, do you need to drill out the knuckle? I’ve been hearing both answers. If you buy the tie rod could I just bolt it on or will the ends not slide in???
Thanks
Not every Jeep is the same. Most will bolt right in, but some have to drill. 90% will bolt in
What sway bar end links are those?
Go team Rugged
What's the overall measurement from tre to tre?
It depends on the steel. My Teraflex HD tie rod refuses to bend.
Were you happy with your TF steering parts? I can't stand mine.
Go TEAM RUGGED!!!!!!!!!!!!!
GO TEAM RUGGED
Go team rugit
Websites say that the rock ram only fit the tj, so will it work for a jk? Interested in a steering upgrade
I am only using the rock ram hydraulic ram. I would reccomend the PSC kit
Are the 1 ton tie rods with the Barns kit the same tie rods that come with the Ruff Stuff?
They appear to be different
go, team rugged
How much does the aluminum tie rod weigh?
Hey man that jeep is sick, I have a quick question. What backspacing are you running, and do you experience any rubbing? Also, what amount of lift do you have?
Thanks man! And 3.75” backspacing with 4.5” lift. Right now I only rub a little with the 40s and it’s on the frame at full turn, 3.5” backspaced wheels would help that, but it’s not bad at all
@@JKGearandGadgets are you running any wheel spacers at all?
i asked them yesterday and they said that is the same taper as jk.
I just bought an aluminum tie rod and the end locking nuts that keep the rod from spinning keep coming loose no matter how hard I tighten them. Any suggestions?
A dab of loctite. Or tighten them more, use a very large adjustable (huge), or a crows foot. It should be well over 100ft pounds
@@JKGearandGadgets awesome thank you, I called the company (doetsch off-road) and they suggested the exact same thing. They said use blue loctite because it’s medium strength. Just got an alignment and tightened everything more
When will the drag link flip be available?
Barnes said it should be fairly soon!
What's the update on the clutch problem? Hopefully you got it all figured out by now
I’ll talk about it in an upcoming video. Honestly not too sure what it was, threw a bunch of parts at it
Will be on the look out for it. Thank you for making these great videos, they are always the highlight of the week
Thank you, that means a lot!
Hey Jk gear and gadgets do you have a discount code for 7 slot customs I want to order the drag link and tie rod
Yes. Jkgear
I have a question. I got the tie rod and the Drag link also. My question is the aluminum drag link has no curve in it like the stock one has. It’s just straight. Is that going to work.
Yes
JK Gear and Gadgets ok thank you. Your the only person I trust asking. I watch all your videos and learn about jeeps from you.
Where can I buy tie rod ? I don’t see the link . Thank you
Barnes4wd
Go team rugged
What would be the best option for a tie rod for a sport
This
Go team rugged.
Did Barnes 4wd ever get back to you about needing washers before the castle nut
Most people don’t need them, must have just been my knuckles 🤷♂️
Mine did the same. After torquing down to 40 foot pounds the hole was past the castle nut. I guess I'll be stacking washers like you did.
I'm about to install the barnes tie rod and drag link set up in my 08 jk. It says there's no drilling or reaming unless you're flipping. Is this true?
Yep
@@JKGearandGadgets...just watched the test of the new tie rod... Holy sh*t. Amazing!
Not in Australia, you're looking at 500+
I have a question I installed these on my stock Jeep fit good but my rim is touching a little on the bar if I buy spacers how big should I buy them 1.75?
If it’s barely touching you can try to grind down the end a tad, or get spacers. 1.75” will probably work, check clearance when your tires are turned as well
You the man thank you merry Christmas
What was the final outcome with your clutch problem ?
I’ll talk about it in one of my next videos!
Still not exactly sure haha
Is this tie rod still running strong?
I was going to get the RK tie rod but decided on this one instead. Hope the money saved doesn't haunt me later.
Still going strong!!
@@JKGearandGadgets awesome! thanks for the update!
Hey Ben, would you recommend painting the tie rod at all?
Nope! Just rub it down with wd40 every few weeks
JK Gear and Gadgets thanks for the quick reply! Just now writing out torque specs and a quick sheet to look off of and I’m off to install the tie rod/drag link kit, new steering stabilizer + relocation bracket!
Currently trying to decide between this and the Steer Smarts...any input?
I prefer this kit, you save some money, get the benefits of aluminum, and if you ever hit a big rock your not transferring the shock load into your knuckles or steering box. Plus it looks cooler 😂🤘
JK Gear and Gadgets I am leaving towards doing this one. My only concerns are how the ends compare tot he ones Steer Smarts uses. I can’t seem to find which ones they use.
That’s another good thing about the Barnes kit. They use the GM 1 ton ends, so if they ever break it is easy and cheap to replace them. Instead of trying to find steersmart replacements
You a chapel Hill fan?? haha I saw the UNC sleeve lol
Haha yeah my sister went there
@@JKGearandGadgets 🤟🤟
How do you feel about the aluminum tie rod after having for a while. I keep getting mixed messages. Some say in the long run it's not reliable, others say they haven't seen issues but are biased, as they are the manufacturer.
Who is telling you that in the long run they aren’t reliable? 😂 that’s a load of BS
@@JKGearandGadgets 😂 my thoughts exactly. I've been researching and it didn't add up. I'm glad I brought it up to you before not moving forward. Definitely purchasing then. Thanks!
You run Hydraulic steering with this?
Yes. As long as the ram is parallel with the tie rod you won’t have any issues with the ram bending the tie rod. Most people that have an issue with aluminum and Hydro assist have it incorrectly setup. Need to make sure the ram is on a flat and unangled plane, and set the tie rod clamp all the way back while the tie rod is rotated (tie rod flop) all the way forward, which will keep the ram and tie rod in a centered state.
Would there be an issue if i have 16" wheels?
I would give them a call and verify
Is the mount that you linked to what you use for your hydro assist?
No, that is what I used before I went to hydro assist, you will want to weld on the hydro assist mounting tabs
You could possibly weld that mount onto the axle, but by welding on tabs it allows you to set your ram wherever you want it
How do you weld steel to an aluminum tie rod
Jeffrey Wheeler ohh.. no lol. The link in the video is to the axle side bracket. I didn’t put a link to the tie rod clamp, it’s from PSC
By chance know where to get one? Site says they are gone.
Just talked to them, they are out of the tie rod ends, will have the tie rods back for sale next week so keep an eye out!
Ive been waiting as well! They just became available again & they got my money..
Sooo the reason I want one of these is the flex!!???
Steel tie rods are a good upgrade, but when you do hit something hard or land on a rock it will eventually bend. The good thing about aluminum is that it will bend just like a steel one, but it will bend right back to normal. I’ve had to bend my steel tie rod back with my winch way too many times. If you were to buy an upgraded tie rod then aluminum is the way to go.
What kind of drag link is ok to buy for a upgrade for jk
I reccomended the Barnes aluminum drag link as well
They come in kits right drag link and tie rod also do I have to do any changes any spacers to install this on my stock Jeep 2012
Depends on if you buy the kit; they also sell them separate. Check out the website
295$ the price must have went up
Barnes site shows this product as "not for sale" ?
Just checked and it looks like it was available?
Good deal!
Rugged ..!! I gotta get one ..!!
Gloves !
For what?
How did you balance your tires?
A shop local to me balanced them. I planned on using dynabeads if they couldn’t do it
JK Gear and Gadgets I'm thinking of getting rid of my beads, 10oz wasn't enough.
What size tires? I’m surprised 10 wasn’t enough
JK Gear and Gadgets 37’s Mickey Thompsons. A buddy had a hard time with his too. Could be the brand.
Go team rugged OIIIIIIIO
go team rugged
Giveaway!!!!!
Why not flip the tierod?
Can’t with the oem knuckles. Drag link casting is in the way
GoTeamRugged
the 2 different d rings are driving me nuts
Haha I’ll change them out soon enough. I won the warn shackle and haven’t gotten around to buying the other one
I got to get one of those. BEEF!
Its $300 now!
Still worth it! Metal prices have skyrocketed over the years
@@JKGearandGadgets Agreed!
They r not available 😢
Temporarily sold out! Will be available soon
Barnes said they'd be available this week but I imagine the remnants of the hurricane going through their area slowed things down. I'm also waiting.