So happy for you that you got it running. What a milestone. It's because of your videos that I've been able to keep my son's 07 Xterra going. Picked it up cheap and he loves it. Thanks so much!
It is possible to replace the engine with an R35 engine, with the possibility that it would not be surprising if it is able to deal with and cross rugged places such as the desert and mountains in the most difficult terrain. There were successful experiments with this mighty R35 engine on the Nissan Patrol Y61, and the result was a shock they did not expect, even in the highest sand dunes. It's like a speedboat cutting through the desert sand
Congrats Ry! 👏🏻 Awesome to see all your hard work pay off! Did you happen to keep your notes on the jumper harnesses? I think I have two of the three plugs figured out, going through the service manuals with the spreadsheets off irate4x4, which I'm sure you spent plenty of time looking at... (man, what a pain in the butt) Just wondering if it was mainly different pin locations on the older '06? I can't wait to get my Frontier back up and running. Your videos are truly inspiring. Cheers dude! 🍻
Thank you man! And thanks for the super! Yes I do have the spreadsheet and I am making a whole video on the process. Email me and we can discuss it. Ry@rtcg.tv
Stoked to see it running! Dont forget about the auxiliary cooling fan. When i did my swap i forgot to add it. For the most part you wouldnt even notice it missing, until you have the vehicle sit for awhile, temps will eventually rise. The clutch fan isn't enough to pull air in when sitting. But as soon as you start to drive at highway speeds, its fine.
@@Rythecarguy I have it mounted in between the radiator and transcooler. The way I mounted it is very haggard. Trimmed with sawzall, and held in with zipties. I did this fix right before going offloading and it held up great so I never addressed it further. But I'll eventually create mounts for it lol.
@@Rythecarguy yessir, I didn't want to buy any additional fans, so I used the fan that came off the truck 😂 But I'm sure there's a cleaner setup, but last time I checked a v8 pathfinder aux fan was like $200... zipties and trimming was practically free
Way to go, dude! Good to know the Xterra AC line is different. I blocked off the rear air in my Armada recently and was told if that didn't work, to use Titan lines. 🤘
@@Rythecarguy There's like a T on the lower passenger side firewall and the lines for the rear run down inside the passenger wheel well. I chopped off there and used some AC line block fittings from Dorman. Cools the whole damn truck with no problem. Lol
Great job on the swap. Kinda surprised you struggled so much with the power steering and A/C lines as both of these fixes are very common knowledge on most VK swap forums and other Y-tube videos. You haven't addressed you radiator issue thus far but hopefully you discover there is a easy fix for that too rather than doing some elaborate electric fan swap.
Thanks man! Fun fact about me, I absolutely despise reading forums and I'm not a huge fan of watching TH-cam videos lol. I really like figuring things out on my own. Still working on the fan. It got cold and I don't wanna work on it now.
Hey, thank you for video and hard work. i have one question about , i have scanned my X 2012 model recently and it shows P0710 error (automatic transmision temeprature sesnor error) have you ever expereinced such a issue if yes how you fixed it? thank you
On that Nissan Xterra u got has a drain hose on the overflow that we installed so it drains under the Xterra lol good work as always keep it going lol 😊
@Rythecarguy see if you can hit up your local pick and pull yards for a v8 pathy fan shroud and intake pipe/box. They're kinda rare but I've found a few in my local yards
@@Rythecarguy I still haven't charged my ac yet after my engine swap. Thinking about just paying someone as well. I haven't gone thru all the videos yet, doesn't look like you did titan swap suspension yet. What struts did you decide on since I am assuming you will do a full titan swap? I know all dogs just released a fox titan swap strut, not extended travel though. Really aren't much options with nisstec basically closing. Radflo is basically the only other option and they don't have a great rep lately with leaking and making noise. I know you can put rc frontier struts in there but they are not adjustable but are cheap. That v8 sounds awesome, looking forward to you getting it qll together!
Ry, did you use the OE Xterra AC line when you used the Titan top AC line. I'm wondering if I need to actually order the part? I'm doing the same swap, but into a frontier.
People also call it the clock spring. In the Xterras along with the clock spring comes a angle sensor. That sensor is used for VDC based on my understanding. If that goes bad, then it can cause issues with VDC.
@@Rythecarguy I found your video on it. Not sure if that's my issue because my horn works and the lights only pop up occasionally. Mostly on super hot days. I'll have to do some research. Thanks for the help!
Hard to say in different markets. It's hard to find one under 100k that isn't wrecked TBH. My guess would be around the 5K mark. If you can tolerate higher miles and maybe a little maintenance work while the engine is out then you can find tons of them around the 3k mark.
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Ry, it’s because of you my Xterra has reach 170,000 miles and still going strong. Love the videos brother. Awesome work!!!!!!
That is awesome! Glad to hear that. Thank you. 👍🏻
Ray can you please tell me where the Map sensor is located on my nessan extra 4.0 V6 is please 🥺
So happy for you that you got it running. What a milestone. It's because of your videos that I've been able to keep my son's 07 Xterra going. Picked it up cheap and he loves it. Thanks so much!
That is awesome! so glad to hear that. Never say die!
So excited to see 8 ball on the road!
🥳😁
Ahhh yes the moment I’ve been waiting for, can’t wait but I’ll watch the whole video to get to it😂
Well thank you! 😂
It is possible to replace the engine with an R35 engine, with the possibility that it would not be surprising if it is able to deal with and cross rugged places such as the desert and mountains in the most difficult terrain. There were successful experiments with this mighty R35 engine on the Nissan Patrol Y61, and the result was a shock they did not expect, even in the highest sand dunes. It's like a speedboat cutting through the desert sand
Can't watch this right now BUT CANT WAIT TO WATCH after dinner.
😁😁😁 I hope you love it.
Fantastic job, its crazy how your the only person to actually film this awsome swap. Im stoked its you though keep up the hard work.
Thanks a ton! I know I tend to talk a lot and draw things out but I hope it gives people enough info/confidence to do the jobs themselves.
Nissan did the VK swap for me when they built my 2008 pathfinder. 😂😂😂😂
Love the build. Keep up the good work!
Haha hell yea. I bet it's nice. Thanks man.
Awesome Bro! I too was pleased when it fired up.
You and me both! 😁😁
Awesome!! Sounded really beefy, need a video of you driving or off roading that would be cool
Will do!! Right after new tires 🙃
What an awesome video! Really enjoying this series!
Thanks so much! I know it's a lot of video but I hope it helps!
Congrats Ry! 👏🏻 Awesome to see all your hard work pay off! Did you happen to keep your notes on the jumper harnesses? I think I have two of the three plugs figured out, going through the service manuals with the spreadsheets off irate4x4, which I'm sure you spent plenty of time looking at... (man, what a pain in the butt) Just wondering if it was mainly different pin locations on the older '06? I can't wait to get my Frontier back up and running. Your videos are truly inspiring. Cheers dude! 🍻
Thank you man! And thanks for the super! Yes I do have the spreadsheet and I am making a whole video on the process. Email me and we can discuss it. Ry@rtcg.tv
Stoked to see it running! Dont forget about the auxiliary cooling fan. When i did my swap i forgot to add it. For the most part you wouldnt even notice it missing, until you have the vehicle sit for awhile, temps will eventually rise. The clutch fan isn't enough to pull air in when sitting. But as soon as you start to drive at highway speeds, its fine.
Thanks man! How did you handle that fan? Put it in the front or something? Buy a new one?
@@Rythecarguy I have it mounted in between the radiator and transcooler. The way I mounted it is very haggard. Trimmed with sawzall, and held in with zipties. I did this fix right before going offloading and it held up great so I never addressed it further. But I'll eventually create mounts for it lol.
@@ke_ata wait you used the original fan?
@@Rythecarguy yessir, I didn't want to buy any additional fans, so I used the fan that came off the truck 😂
But I'm sure there's a cleaner setup, but last time I checked a v8 pathfinder aux fan was like $200... zipties and trimming was practically free
@@ke_ata oh helll yea. That's what I'm doing. You won't see it so who cares thanks for talking me through it.
"Fragile and annoying, kinda like me" LMFAO
😂🤣
You’re crushing it!!!
Thanks man! So happy. 💪🏻💪🏻
Way to go, dude! Good to know the Xterra AC line is different. I blocked off the rear air in my Armada recently and was told if that didn't work, to use Titan lines. 🤘
Wild are they separate lines for the rear or something?
@@Rythecarguy There's like a T on the lower passenger side firewall and the lines for the rear run down inside the passenger wheel well. I chopped off there and used some AC line block fittings from Dorman. Cools the whole damn truck with no problem. Lol
Best vk swap explanation, thanks
Thanks dude!! 💪🏻💪🏻
Great job !!! Thanks for showing us how it’s done
No problem 👍 my pleasure
Great job on the swap. Kinda surprised you struggled so much with the power steering and A/C lines as both of these fixes are very common knowledge on most VK swap forums and other Y-tube videos. You haven't addressed you radiator issue thus far but hopefully you discover there is a easy fix for that too rather than doing some elaborate electric fan swap.
Thanks man! Fun fact about me, I absolutely despise reading forums and I'm not a huge fan of watching TH-cam videos lol. I really like figuring things out on my own. Still working on the fan. It got cold and I don't wanna work on it now.
I think I'll take the wildfire smoke...lol...love the series, btw.
Hey, thank you for video and hard work. i have one question about , i have scanned my X 2012 model recently and it shows P0710 error (automatic transmision temeprature sesnor error) have you ever expereinced such a issue if yes how you fixed it? thank you
Oh man IT'S ALIVE😂that's awesome dude👍🏾
Yessssss so pumped. Thank you man. 😄
@@Rythecarguy np
Can't wait to see it all finished.
Wait r u gonna do a lift on it?
VDC and Slip light will come on when the brake fluid reservoir is low. Maybe having the break lines disconnected is tripping that?
I think you were right! They went away after the first drive
What are you going to do about all the check engine lights ?
hi Ry, My X-terra is at 180 k miles, it runs perfectly fine, but what do you recommend at this mileage to take a good look at ? thank you
it runs! cool & nice work!
Thanks man!
On that Nissan Xterra u got has a drain hose on the overflow that we installed so it drains under the Xterra lol good work as always keep it going lol 😊
Ohh good idea. Did it overflow a lot? Have been thinking about what to do with that Xterra and I think you're gunna laugh when find out.
Lol yes it works lol ? Just a joke but jack it up like a monster truck lol 😂
@@jeffreyarmstrong5974 not running yet. I think it's going to need a new motor :/ but i think I might take the roof off and make it a convertible 😄😂
That sounds very good I never thought of that 😁
Tengo una nissan externa año 2006 tiene sobre calentamiento tiene termostato nuevo bomba de agua nueva que podrá hacer
@Rythecarguy see if you can hit up your local pick and pull yards for a v8 pathy fan shroud and intake pipe/box. They're kinda rare but I've found a few in my local yards
Oh man trust me. I've been looking for a whole. They are damn unicorns.
@Rythecarguy I'll keep my eye out. If i run into one I'll pull and let you know
@@nomad_vk8998 that would be amazing thank you. Did you end up replacing the second fan?
nice work. are you gonna make a charge the ac system video? glad you finally went 4x4
Not sure yet might just run back to the place that emptied the Titan for me.
@@Rythecarguy I still haven't charged my ac yet after my engine swap. Thinking about just paying someone as well. I haven't gone thru all the videos yet, doesn't look like you did titan swap suspension yet. What struts did you decide on since I am assuming you will do a full titan swap? I know all dogs just released a fox titan swap strut, not extended travel though. Really aren't much options with nisstec basically closing. Radflo is basically the only other option and they don't have a great rep lately with leaking and making noise. I know you can put rc frontier struts in there but they are not adjustable but are cheap. That v8 sounds awesome, looking forward to you getting it qll together!
Sound nice. Congratulations ❤ 🎊🍾🎊
Thanks man! So excited
Nothing sounds better than a V8! Maybe the sound of liking and subscribing! 😅
Yea lol the little ring of the bell. 😂🤣
Ry, did you use the OE Xterra AC line when you used the Titan top AC line. I'm wondering if I need to actually order the part? I'm doing the same swap, but into a frontier.
No, I used the stock one off the Titan on both sides. From the ac compressor to the back pipe. And the back pipe. 💪🏻
My vdc/slip lights come on occasionally. What is this spiral cable you speak of ? 🤔
People also call it the clock spring. In the Xterras along with the clock spring comes a angle sensor. That sensor is used for VDC based on my understanding. If that goes bad, then it can cause issues with VDC.
@@Rythecarguy I found your video on it. Not sure if that's my issue because my horn works and the lights only pop up occasionally. Mostly on super hot days. I'll have to do some research. Thanks for the help!
I really want to do this, how much do you think I could score a wrecked donor titan under 100k miles?
Hard to say in different markets. It's hard to find one under 100k that isn't wrecked TBH. My guess would be around the 5K mark. If you can tolerate higher miles and maybe a little maintenance work while the engine is out then you can find tons of them around the 3k mark.
So no tune needed?
عمل ممتاز سؤال ممكن اعرف كم اوكتان الوقود للنيسان اكستيرة2008 وشكرا لك متابعك من العراق
۸۷، ۸۹ او ۹۳.
شكرا جزيلاً
@@زينالعابدينالسجاد-ح2ك عفوا
I'm trying to watch your video, but my eyes are burning too much from wildfire smoke ;)
😂🤣
Nice job.
Thanks!
100 percent good wow thank you
Thanks! 😄
Yeahhhhhh budddddy!
🤘🏻🤘🏻
@@Rythecarguy so good a 10mm shirt is on its way down under! Cheers mate!
I’m guessing it’s not starting cuz it’s in reverse and not park
I was right
😂 I'm not used to the automatic and didn't even pay attention to the cluster when trying to start. I just looked at the battery voltage and that's it.
@@Rythecarguy it is the worst when you realize the problem you’ve been trying to solve for last 4 hours had the simplest solution ever
@@PYROtheNomad right!?! 😅
Bro were you trying to start it in reverse? 😂
Hey man... in my defense I have never owned an auto Xterra before. I didn't even notice the big "R" on the instrument cluster LOL.
@@Rythecarguy haha sometimes I'll turn off my Xterra in drive and wonder why I can't get the key out. Then wifey says, "you're in drive, dummy" 🤣
@@_moes_garage_ oh good. So I'm not the only one.
@@Rythecarguy nope 🤣
Your the first gay car guy I ever seen small club.
Canadian wildfire smoke, where's my mask
Lol it was a joke but I'm a man of my word. Send your address and a mask will be there
W
🤘🏻
i think its not working because R trans
Yep! That was it
Had it in reverse lol noo
😂
Definitely the Canadian wildfire smoke, sounds like a deodorant scent 😂
Hahaha it does!!