Live stream was great i caught a good amount of it. I started laughing when the donations reached well over $500 and i could see how uncomfortable you were getting. You are a honest person and a darn good content creator. You are setting a good example for our youth.
You might say you're not an interior/ body repair guy, but the more you do it in these projects the better you can see your skill evolve. You're doing a great job, I'm itching to get back on my B2200 after watching you for the past few years
Watch the travaller build , he built that from a shell..? Every thing under it? his skill isn't evolving, he actually doing less full on builds, datsun king was big build to , 12 hour build on c10......This year he'll build more.. Full on builds..
5 minutes in Puddin and I'm already rolling. Thanks again for your humor I was having a very crappie day and you just fixed it. Thanks again God bless you and yours. By the way send Mortske the dortske a tire he had a flat today lol.
I remember when you were building the Datsun King you were giving the haters hell and made a smart response about building a C10. 2 years later and here you are, building this bad boy. This is probably my favorite paint job in your fleet.
Very cool samurai you had too much coffee but I love it I love your channel you're cool just keep up the good work and I love the cars and the vehicles you fix
Make sure you wire those dash speakers in sequence, instead of parallel, so you don't change the ohms to 2ohm instead of 4ohm. If you don't, it's hard on the stereo. Love the show! GMC is lookin gud
You know PUDDIN, there is a plate that covers that hole, then you cut precisely the speaker holes and drill holes to attach and then secure the dash pad.... Insteadof it sounds like crap and vibrating the speakers loose.....
You lay down your carpet kit,or if you are like me the remnants from the carpet store and lay it down in the truck, take your scratch awl and heat up the end with the map gas torch lol, and stick them through the hole where the bolts go through and carefully cut through where the hot scratch awl pokes through the carpet and put the bolt in the hole pushing the hot scratch awl out of the carpet and that way you don't get odd shaped holes and frayed yarn strings in your carpet install.and the 78-80 Cheyenne Silverado and Sierra classic and grande,door panels with the wood grain trim panels on the factory trucks that are not optioned with the pull handle there's a decorative chrome bar that bolted in the place of the pull handle on the door panel i have dealt with them because i had worked on a 79 Chevy k10 Cheyenne
Puddin, I don't think that GMC looked THIS GOOD rolling off the lot the day it sold! As always, amazing work! Looking forward to seeing you finish this truck and what you have ahead! Thank you for everything you do bud! Have fun!
I'd love to see bills truck build on the channel. I'll bet it's nice and a great build .he seems very knowledgeable about engines ,please see if you can talk him into showing us what he's doing, I know for one I'd love to see it for sure
You need to talk to your heat/AC guy and put a small vent from the vent on the wall into your storage room so it doesn't get so cold/hot depending on the season.
Great episode, love seeing this truck come together! I wish someone would make these reproduction door panels in tan. The spray dyes never hold... no matter how good you prep it.
Just wanted to say thankyou for your videos I’m sitting in a hospital waiting room while my father is having a very serious surgery because he has a pacemaker your videos help my mind stay occupied I’ve cried a million tears in the last two days so from the bottom of my heart thanks for replacing the tears with a smile You’ll never know how important your videos are thanks From
On your window crank to remove that pain in the ass clip, use a shop rag. Straighten the rag out and put it between the panel and hand crank, work the rag back and forth while pulling up on it and the clip comes out like magic!!!
That GMC might still have a little rust…but she’s living her best life. Short bed, patina, running well, and a beautiful new interior. Might even be better than when she left the factory. Nope, definitely better than when she left the factory. Have so enjoyed this build.
lol the stuff under the dash, reminded me of one of my friends riding in the old F700. he went to open up the cowl vent, and got pelted in the face with a mouse skull. he decided it wasn't worth opening.
makes me wanna go get a long bed c10 ASAP. i usually hate these trucks as they werent taken care-of and they are all ROT. but man you make me wanna save one ! i loved this one !
When you are ready for another episode of Puddin and you find out he is installing carpet in a short bed, the very thing you did on your classic short bed the day before. Black from ACC as well, still worth the watch.
My gracious @Puddin!! I absolutely LOVE this truck!! I know you’re joking about taking this truck to auction.. but I truly think you’d be surprised at how much it would bring.. lol !! You’re sitting on a daggum small goldmine with this thing as much as they’re bringing now days!! Stay blessed brother.. You ALWAYS brighten my Mondays and I appreciate you for that!! So Thank you brother!!
That old 76 C10 is really coming along that interior has really made the truck come alive and thanks for the intel on the Cheyenne truck parts my brother-in-law is building 76 C10and was looking for interior parts
When I used two speakers in the center of the dash on my Pontiac, I cut the cone off the original speaker so I had a ring that I could attach the 2 speakers to.
If Puddin lived north of the Mason Dixon line he would never delete he floor vent. Mild heat from the bottom up is much better than getting your face baked.
After recently seeing your videos for the last couple weeks as I'm recovering from having a large tumor removed from my neck that was growing on my spinal cord I've really enjoyed watching multiple videos per day. Being a godly man is very nice to see. Taking good care of the Easter pup was awesome. And giving back to your buddy the Gangster motor car (GMC) was the shiznit. You're the first youtube channel I've ever subscribed to. Keep up the good work. And God bless.
In automotive wiring, the gray wire is typically used for engine management and computer output circuits ¹. It's also used for transmission control systems and cruise control systems ². Additionally, gray wires may be used for lighting circuits or illumination purposes ³. It's important to note that specific wire functions can vary depending on the make and model of the vehicle, so consulting a wiring diagram or service manual is recommended for accurate information ¹.
TRUCK WINNER. @ paulgumper
2nd Place $500 @anthonysipes441
3rd Place $250 @martinlehman3985
PLEASE EMAIL ME AT puddins.fab.shop@gmail.com!!!!
Please don't email if you didn't win! Don't be THAT guy
Didn't win but came to say I appreciate everything about this no bs giveaway. Thanks for all the awsome content puddin!!
Damn I was hoping I won but congratulations to the winners
Congratulations guys!
Congrats to the winners! Hope they love what they got!
Live stream was great i caught a good amount of it. I started laughing when the donations reached well over $500 and i could see how uncomfortable you were getting. You are a honest person and a darn good content creator. You are setting a good example for our youth.
Man I always love when Slick and Bill drop by to help or visit. It’s great to have friends like them.
Remember everyone to smash that like button help puddin out
And comment. It helps the ole alligator rhythm
I always do
You have to actually like it !!!
I Will do it.
This truck is nicer than ANYTHING you can buy new. Anything.
Can we all just acknowledge the fact that the Towrolla may be the most versatile vehicle in the entire fleet?
The Stanley bit. I'm dying 🤣
My man puddin just has a movie made every week for us and it’s FREE oh how I hope these make it into the Smithsonian for generations to come to enjoy
From live video to this video woot twice in one day sweeeeet
Momma says Can’t have too much Puddin! (Waterboy voice)
You might say you're not an interior/ body repair guy, but the more you do it in these projects the better you can see your skill evolve. You're doing a great job, I'm itching to get back on my B2200 after watching you for the past few years
Watch the travaller build , he built that from a shell..? Every thing under it? his skill isn't evolving, he actually doing less full on builds, datsun king was big build to , 12 hour build on c10......This year he'll build more.. Full on builds..
I thought you was gonna tell ‘em
Sittin on ur ass won’t finish your project
Oh Rubert!! Do be a good man, and fetch me my bougie water! Another GOOD ONE, y'all!!
5 minutes in Puddin and I'm already rolling. Thanks again for your humor I was having a very crappie day and you just fixed it. Thanks again God bless you and yours. By the way send Mortske the dortske a tire he had a flat today lol.
I second that 👍
Hot dam, letttttttssssss gooooooo! Congratulations to the truck winner!!!! 🏆🏆🏆
That interior came out freaking amazing! Who ever gets this truck, is going to ride in luxury, that is for sure!
I remember when you were building the Datsun King you were giving the haters hell and made a smart response about building a C10. 2 years later and here you are, building this bad boy. This is probably my favorite paint job in your fleet.
By the way it was really great that you had Bill and slick fifty with you during the live feed. You're good man
Man watching you do stuff like patch panels and big teardowns just gives me confidence more and more to do it myself one of the next projects
Top Stitch with the railroader pinstripe overalls 😂 I love it
Thank you for the laughs and smile.
That Part !
250k everyone yay! 🎉.. 500k next buddy.. 😊
Thanks for the live stream!I didn’t win but I’m proud to contribute a few $$ to the channel and thanks for the great content.
Love what you do with everything you do son😊.
He said he wasn't gonna make that shop truck perfect proceeds to make it perfect. Love it and I'm here for it!!!
Was gunna say the same thing!
Very cool samurai you had too much coffee but I love it I love your channel you're cool just keep up the good work and I love the cars and the vehicles you fix
Make sure you wire those dash speakers in sequence, instead of parallel, so you don't change the ohms to 2ohm instead of 4ohm. If you don't, it's hard on the stereo. Love the show! GMC is lookin gud
Make sure you're still Subscribed, the tube has been unsubbing people.. not sure why tho..?
Came looking for this.... hopefully he wires them in series
get me all wrked up over a auction build with a pudden stamp dangit
Make sure you vacuum out the bottom of the doors and make sure that the drain holes are cleared out
It’s Monday 2-12-24 here looking for this weeks puddin fix 🎉
A nice relaxing day of puddin. what more could you ask for.
You know PUDDIN, there is a plate that covers that hole, then you cut precisely the speaker holes and drill holes to attach and then secure the dash pad.... Insteadof it sounds like crap and vibrating the speakers loose.....
Not really a big patina fan since I'm 60 years old and we painted our builds. That saying this is one of the sweetest patina trucks ive ever seen.
Agree, patina is an excuse not to finish a build
I love the interior colors on that truck! I’m not big on wood grain either but it works in that truck!
More Puddin the Better!!! Thanks for doing the live stream.
i never get tired of watching the Pot County l̶e̶g̶e̶n̶d̶ shenangan man xD , seeing this truck evolve has been a fun journey :)
Now THIS is the kind of Puddin video we all love. Watched every minute without skipping. Great work Sir. Can't wait for more like this one.
You lay down your carpet kit,or if you are like me the remnants from the carpet store and lay it down in the truck, take your scratch awl and heat up the end with the map gas torch lol, and stick them through the hole where the bolts go through and carefully cut through where the hot scratch awl pokes through the carpet and put the bolt in the hole pushing the hot scratch awl out of the carpet and that way you don't get odd shaped holes and frayed yarn strings in your carpet install.and the 78-80 Cheyenne Silverado and Sierra classic and grande,door panels with the wood grain trim panels on the factory trucks that are not optioned with the pull handle there's a decorative chrome bar that bolted in the place of the pull handle on the door panel i have dealt with them because i had worked on a 79 Chevy k10 Cheyenne
Wow she's going to be brand new and beautiful on the inside when you're done. She looks great
That wood grain is killer.
Live then this….😱😱😱
Congrats to the winner and the surprise of the 2nd and 3rd place thing. Was great but sad cuz I did t win!😂
You always make me smile after a rough day!!! Thanks Sir Pudan!!!
Congratulations to the winners and thank you for being such an amazing inspiration to many of us out here! Appreciate you brother!
Amen
@@2Broke2Quit🤡
The hard way but the best way to remove all the rat crap ,the square body is looking good. 👌
To get rid of smells.. use . Hydrogen peroxide, baking soda, and dawn dishsoap.
WOW...!!!!! man-o-man what a sweet truck it's turning out to be...!!!!
Can hardly wait to meet you at Lone Star round up! We watch your show religiously in our house...every Monday and Thursday.
Puddin, I don't think that GMC looked THIS GOOD rolling off the lot the day it sold! As always, amazing work! Looking forward to seeing you finish this truck and what you have ahead! Thank you for everything you do bud! Have fun!
Thought the fart was going to have me dead then you hit me with the marching and Stanley cup 😂😂 still got 2 hrs to go!
That truck looks better than anyone expected!
Awesome !
I'd love to see bills truck build on the channel. I'll bet it's nice and a great build .he seems very knowledgeable about engines ,please see if you can talk him into showing us what he's doing, I know for one I'd love to see it for sure
Gotta agree with you. I bet it'll be well worth a look .
I love how the truck turned out makes me want to get out there and find one to put some work in to
Hot Damn It's Time For Another One 🤘
The Toyrolla is calling...it wants its interior back to old glory!
I’m very thankful for Mr Mortske. He’s the one who turned me on to your channel. I’m so thankful he did.
You need to talk to your heat/AC guy and put a small vent from the vent on the wall into your storage room so it doesn't get so cold/hot depending on the season.
You are going to give it to Bill. Good choice. He deserves it.
I never heard him say he was giving it to Bill. Did I miss it? Clear to the end of the vid he’s still saying it’ll be a surprise.
it is my guess.
@@emersonb5764
Puddin time 🎉🎉🎉🎉🎉🎉 for the second time today 🎉🎉🎉🎉🎉🎉🎉
Great episode, love seeing this truck come together! I wish someone would make these reproduction door panels in tan. The spray dyes never hold... no matter how good you prep it.
I didn’t win the truck, but the best part of winning the truck would have been meeting you Puddin! Great work Brotha!!
Just wanted to say thankyou for your videos I’m sitting in a hospital waiting room while my father is having a very serious surgery because he has a pacemaker your videos help my mind stay occupied I’ve cried a million tears in the last two days so from the bottom of my heart thanks for replacing the tears with a smile You’ll never know how important your videos are thanks
From
Really enjoyed this video. Don’t think I’ve seen a video of gutting under the dash and replace the vents & ducts. Thanks for another great video
On your window crank to remove that pain in the ass clip, use a shop rag. Straighten the rag out and put it between the panel and hand crank, work the rag back and forth while pulling up on it and the clip comes out like magic!!!
I think it would be cool to bring the wood grain out side the truck and cover the white with wood grain wrap it would look cool
Quick tip for roller upper clips.. take a shop rag and slide it behind the roller upper.....then the clip will come right off.
That GMC might still have a little rust…but she’s living her best life. Short bed, patina, running well, and a beautiful new interior. Might even be better than when she left the factory. Nope, definitely better than when she left the factory. Have so enjoyed this build.
lol the stuff under the dash, reminded me of one of my friends riding in the old F700. he went to open up the cowl vent, and got pelted in the face with a mouse skull. he decided it wasn't worth opening.
From live to vid here we go again with the action
Puddin’s got him a Mortske’s Minute
I Love this truck more than any that you have had. It’s beautiful anyone would be proud to own it. Enjoy it Puddin.
makes me wanna go get a long bed c10 ASAP. i usually hate these trucks as they werent taken care-of and they are all ROT.
but man you make me wanna save one ! i loved this one !
CONGRATULATIONS to the three winners 🏆 👏 🫡🇺🇲
When you are ready for another episode of Puddin and you find out he is installing carpet in a short bed, the very thing you did on your classic short bed the day before. Black from ACC as well, still worth the watch.
You're by far the funniest dude on YT. 😂😎
Hey Puddin', for Okie floor pan patches, head back out to tha junkyard and pull an assortment of old license plates! Yahoo, yippee!!
Ceracoat headlight restoration will make that gauge lens look like glass.
Old square body is lookin real good. Hot damn that things nice
I bet the gmc would bring 20k or more at Barrett jackson!
Truck is coming along nicely. And congratulations to the winner of S10
My gracious @Puddin!! I absolutely LOVE this truck!! I know you’re joking about taking this truck to auction.. but I truly think you’d be surprised at how much it would bring.. lol !! You’re sitting on a daggum small goldmine with this thing as much as they’re bringing now days!! Stay blessed brother.. You ALWAYS brighten my Mondays and I appreciate you for that!! So Thank you brother!!
I gotta say Puddin, you are one of the best!
wow...pretty much sums up that truck, what a great unit. Cant wait to see what you have in store for next week.
The aluminum nut things are called speed nuts. Perfect for this project.
This truck is turning out so sweet
Speed nuts are what the nuts are called that cut threads into the post on trim to hold them on.
The color and patina on the gmc looks great!
That old 76 C10 is really coming along that interior has really made the truck come alive and thanks for the intel on the Cheyenne truck parts my brother-in-law is building 76 C10and was looking for interior parts
When I used two speakers in the center of the dash on my Pontiac, I cut the cone off the original speaker so I had a ring that I could attach the 2 speakers to.
Just put a little black spray paint on the killmat. That interior looks so good with the black!
Puddin, you made an old cow into a WOW!
If Puddin lived north of the Mason Dixon line he would never delete he floor vent. Mild heat from the bottom up is much better than getting your face baked.
😵💫damn near broke my heart when you said you were taking it to the auction😅
Just for the sound effects for making that slot in the sturrin colum amongst other thangs I liked this vija.
After recently seeing your videos for the last couple weeks as I'm recovering from having a large tumor removed from my neck that was growing on my spinal cord I've really enjoyed watching multiple videos per day. Being a godly man is very nice to see. Taking good care of the Easter pup was awesome. And giving back to your buddy the Gangster motor car (GMC) was the shiznit. You're the first youtube channel I've ever subscribed to.
Keep up the good work. And God bless.
Not going to lie, that box looks gooood 8:10. I'm five years over you, so that's looking sweet!
Holmatro is the company that currently makes the rescue tools for most fire departments, otherwise known as the jaws of life.
Great job lot of work coming along great
In automotive wiring, the gray wire is typically used for engine management and computer output circuits ¹. It's also used for transmission control systems and cruise control systems ². Additionally, gray wires may be used for lighting circuits or illumination purposes ³. It's important to note that specific wire functions can vary depending on the make and model of the vehicle, so consulting a wiring diagram or service manual is recommended for accurate information ¹.
Really like this truck won’t hurt my feelings to see anything you do to it
This project is probably my favorite of all your vehicles besides the towrolla.
Seeing the strap snap makes me think that YOU could use a "Yankum Rope" that stretched when jerking a stuck vehicle out.
wow that truck is 100 percent a keeper now
Lookin Great Puddin