Wow I literally just opened the TH-cam app on my phone and had this video at the top of my home page "1 minute ago" nice timing Devin! Edit, after watching: Great vid, excited to see what you do with this series! Stay inspired cool guy
Who would have thought a "vase" video would be interesting? NOT me! But... this was great! I didn't think you could put a printer on it's side. Those vases look amazing. Great work. Looking forward to the next in the series.
Your drip vase may be a very interesting as part of a waterfall. Where the vase is tilted and water is dripping showly of the tips of the plastic drips of your vase. Just a thought. I am happy to like your video. Lee Noring
Have you checked out wire mode in Cura? It totally blew my mind, it's a completely different way of printing... And I bet that a vase in wire mode would look awesome.
You have an unique and creative way to think. Keep doing this and you'll be amazed about how far you can go with your talent. I'm from Brazil and you are an inspiration to me.
Since you mentioned Polysmooth, I have a role of polysmooth, I don't have the smoother but I have the pla black and I'm having a heck of a time getting it to print without a lot of dripping all over the place. Also stringing is horrible so do you have any advice or settings on how to print that polysmooth. I use simplify3D and I have a cr10. I tried lowering the temperature, changing the retraction all my other pla print fine but when I I put the polysmooth in it does not. Any advice or video you have would be appreciated. Thank you
maybe you should try to make interlocking blocks. They wouldn't be lego though, they would have hexagon shaped pegs and holes. They could be called hexo.
After some investigation i found a printer that may allow you to do that very easily, it's called R-360 ( reprap.org/wiki/R_360 ). Time to investigate the possibilities perhaps?
@5:07 i feel so dumb i didnt even realize what you were doing until after you showed it printing, im not sure if you're clever or im just slow :p probably both
based on thing you made in the and of vid I can say eather of 2 things 1. make a print like "Harry Lion" but a cat instead of lion, and pat him at end of each vid like a villian *OR* 2. get yourself a cat (can be a bad idea cuz he/she will be in the way when you work)
dude I love your videos but when you are close to the camera you should like wear sunglasses because we can see your eyes looking at the screen lol jk but yea
Devin, you're the reason vases are the most 3D printed objects
Wow I literally just opened the TH-cam app on my phone and had this video at the top of my home page "1 minute ago" nice timing Devin!
Edit, after watching: Great vid, excited to see what you do with this series! Stay inspired cool guy
Been on youtube for more than a decade, one of my favorite videos to date.
Can you make a 3D building / town
dude, genius
The Diabetic Life thats is a smart idea
The Diabetic Life yes please
The Diabetic Life agreed
There is at least one 3D printer that prints buildings that I'm aware of. It's pretty big, though. =D
You really do have some fantastic ideas mate. The Tilt Vase is outstanding yet such a simple idea. It just needed the right person to come up with it.
Who would have thought a "vase" video would be interesting? NOT me! But... this was great! I didn't think you could put a printer on it's side. Those vases look amazing. Great work. Looking forward to the next in the series.
Always inspiring to see new fresh ideas like this! Great video!
This really has to be the most creative 3D printing channel around.
PLEASE MAKE YOUR OWN DESIGN OF RUBIK'S CUBE!!!!
It has already been done before, go check some videos like the ones from oskar van deventer
Awesome! Try the drip vase in a dark color with more drips hanging off the sides and maybe even inside the other side of the vase!
Can you make 3-D printed brush/comb idk why just first thing that came to mind
Your drip vase may be a very interesting as part of a waterfall. Where the vase is tilted and water is dripping showly of the tips of the plastic drips of your vase. Just a thought. I am happy to like your video. Lee Noring
Have you checked out wire mode in Cura? It totally blew my mind, it's a completely different way of printing... And I bet that a vase in wire mode would look awesome.
You have an unique and creative way to think. Keep doing this and you'll be amazed about how far you can go with your talent.
I'm from Brazil and you are an inspiration to me.
lol we share the same obsession with vase mode... but I didn't think of printing with the machine on its friggin side!? You mad man!
+Maker's Muse haha well part of the inspiration was seeing you manhandle the Trinus while is was printing :P
Hah! ok so how about this then... change orientation mid print to make them stick out in different directions? :P
Make Anything how you doing, just bouda cr10s every time I print a vase the bottom got hole in it any suggestion would help me
Yes, this inovation is why I subscribed! Love this series!
I'm excited about this series.
I didn't really like vases either but you really changed my view! Really great stuff
Pretty cool. I hope you'll show the failures as well as the successes.
Vase Exploration! Great name and fun concept!
Gosh Devon it's always damn near 1 am when you upload
Cass Andra it was 3:00 here when he uploaded
He lives in california so its one for him too
Cool Stuff California time it's one
"Not my best pun, BUT IM STICKING WITH IT" is my new catch phrase LOL
Good pun and can't wait for more in this series
Super cool, Dev !! Thanks !!
Any tips for making vases water tight? Awesome video btw
dude you rock man, keep them coming. Devin do you have a vid how you design the dual color vase, black n yellow
The tilded vase, fantastic :D
You crazy man, nice work, great vid & channel
Why is there a little zigzag on the grey and white tilted vase?
Gonna be honest, this actually might be the future of vases.
Can you give us a rundown if your top 3d printers you used so far? What is your current favorite?
Is it possible to make cups and plates using a 3D printer? Vases often hold water, but for something one will eat off of, is it safe?
Can you put any 3d Printer on it's side to print?
Those tilt vases are really pretty! Hey, I wonder if you could print the two parts of velcro with the sideways printer?
3D printed velcro would be pretty amazing!
Since you mentioned Polysmooth, I have a role of polysmooth, I don't have the smoother but I have the pla black and I'm having a heck of a time getting it to print without a lot of dripping all over the place. Also stringing is horrible so do you have any advice or settings on how to print that polysmooth.
I use simplify3D and I have a cr10.
I tried lowering the temperature, changing the retraction all my other pla print fine but when I I put the polysmooth in it does not.
Any advice or video you have would be appreciated.
Thank you
Make a springo of vase
How many of the "useful' vases holds water?
I would love to see some of the Vases turned into lamps
maybe you should try to make interlocking blocks. They wouldn't be lego though, they would have hexagon shaped pegs and holes. They could be called hexo.
what about using the drips connecting two vases?
id like to know the process to make custom base for the tilted vase as im am still new to using fusion 360
at 5:49 why is there a retraction seam if it's printed in vase mode?
That one actually isn't printed in vase mode, otherwise the built in support wouldn't work.
You could have put a normal process for the custom support and a vase process onwards :P
Please try electro- plating prints or was it electrolysis...
Hey Devin, please do things with voronois!
I think I'm just a little *cough* a lot *cough* too excited for this series 😂
Please combine the two ideas by making a tilted vase on a printer that’s in its side with drips
You should do a video on flexible vases
Witch printer prints the best
Do you think these dimensions are too big for a chromatic vase?
27.5cm*27.5cm*35cm, 136 grams
Pretty cool man good job n stuff
This video is avaseing!
hoorayitsmolly *.* are you a dad?
Dad jokes.
Matthew Hutchinson seriously?
hoorayitsmolly *.* Doesn't work if you're British. :(
Heh heh. Best comment I've seen in a while
Phoenix Wilde well that's deVASEtating (should work)
Love these seires pls continue!
Vase the final frontier!
can u do the hairy lion?
if you put a delta on a roller, could you time the rotation so you could actually make the 'drip vase' but all around?
That would be crazy!
After some investigation i found a printer that may allow you to do that very easily, it's called R-360 ( reprap.org/wiki/R_360 ). Time to investigate the possibilities perhaps?
try 3d printing bugs I know you already did a 3d pen bug video but just a suggestion
Can I buy one?
Nice prints
I've just realized that your channel name is perfect marketing.
pretty interesting concept o.o
Loved it, ;)
You should 3d print a klein bottle!
I would do things like these... But, I don't think I can do vase mode on makerbot print. And also it's a school printer haha
@5:07 i feel so dumb i didnt even realize what you were doing until after you showed it printing, im not sure if you're clever or im just slow :p probably both
wouldn the drip vase be nonfunctional as a vase tho? bedcause of the holes and all, just saying
+David Ext most of these wouldn't hold water with some kind of coating or treatment. But you can always display dry flowers!
Make Anything // 3D Printing Channel ahh, so they're mainly for looking nice?
would anyone be willing to walk me through recreating the tilt vase in fusion as i am still learning fusion 360
Brilliant !
Try to make minecraft steve using the 3D pen is a good idea in my opinion
If I had a printer with a full shell, not a Wanhao Di3, I would totally print something sideways like that drop vase.
Printer?! Rly cool...
Yay new video
Try a vase where you print 50% then pause it, remove the print then continue the print
Devin the vase man 😁.
Vase. The final frontier.
well done
That tilted vase is UA related! Accident? Meaby...
Noti sqaudd!!!
based on thing you made in the and of vid I can say eather of 2 things
1. make a print like "Harry Lion" but a cat instead of lion, and pat him at end of each vid like a villian
*OR*
2. get yourself a cat (can be a bad idea cuz he/she will be in the way when you work)
+Artem Zhuravski I hear cats like to lay on heated build plates.. I would have one happy cat 😋
will be funny if you will find yourself a cat only cuz I said to
ome one should do the drip vase one in space
awesome! ! ! ! ! !
I've printed one vase, a failed fidget spinner, and no benchies lol
1:00 in the morning I realise why I'm on TH-cam all night
Yay
Can you drink out of those?
3d printed beer glass, hmm
Next exploration is tilting the computer while building the model.
Hi
i'm early for the first time ever..
m....mm....mmm....MMMMMMOOOORRREEEEEEEE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
dude I love your videos but when you are close to the camera you should like wear sunglasses because we can see your eyes looking at the screen lol jk but yea
Theses look VASE-some!
It's funny because you spell vase the wrong way
He nice vid
Cant wat 4 next episod!
I've had ENOUGH with vases, sorry
Sell me one oml
CAN I GET UHHH BONELESS VASS
Dylan Ryan 🅱️oneless vase please
Who was here before 1000 views
Sa dude
Heeeyyyy
Melon Vlogs you're first!!!! Nice job
40th!
Last
First
you were 4th
Actually, they were 3rd
if you click newest first it says he's 4th
Interesting, doesn't show that for me.
hmmmmmm. glitch maybe?