I 3D Printed a Boat (World's Largest Benchy!)
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- Go to brilliant.org/... to get a 30-day free trail and 20% off their premium annual subscription!
3DGloop!: www.3dgloop.com/
Polymaker Filament: us.polymaker.com?aff=40/
Merch: www.emilytheen...
Patreon! / emilytheengineer
~Socials~
Instagram: emily.the.engineer
Tiktok: tiktok.com/@emily.the.engineer
Twitter: emilydaengineer
Dan: @BuildDanielBuild
missed opportunity to say "boat load of plastic" 0/23 Banjo-Kazooie puzzle pieces.
what no jiggies
@@NonsensicalSpudz absolutely NONE fr
I felt like replying but I didn't know what to reply with
Missed opportunity to name it Benchy McBenchface!
DuhHUT!
The Macro-plastic killed me! Great video
same I scared my cat
My first thought was the Benchus.
condoleances 🙏
bot comment
I came to comment this. Macro-plastic is gold for sure!
If Macroplastic was 2 times bigger, it could hold 2 batteries and Dan could travel 2 times the distance and Emily could get 2 times the Wendy's. I think we're going to need a bigger Macroplastic.
Call it the Megaplastic
Actually Emily really need to do more bigger. Cuz she said the life size but she still even not fit in the rooft. Okay petition to Emily do it again but more bigger, start!
Make it 4 times bigger. They can go get the 4 for 4 in the 4
@@KAK_PAN Also need to license Jan Hammer's Miami Vice theme.
@@lightning1896 Ah yes, the GIGAPLASTIC
Paw-paw always taught me that if you chuck your batteries at exactly a 27 degree angle directly into the center of your neighbors pond, they will safely discharge into the ground.
I heard that if you discard the batteries in the neighbors yard the battery fairy comes and gets them
The approach to stability is kinda surprising. The highest initial stability is generally found in flat bottomed barge like boat. While adding a volumetric keel to the bottom of the boat lets you get your ballast lower and bring down the center of gravity it also moves the center of buoyancy down. When the boat heels over that center of buoyancy moves to the side that's high and works against you.
He is a boat builder rather than a naval architect (which is properly considered a branch of engineering) but Leo Goulden of Sampson Boatworks has a really good video explaining boat stability.
Can you tell me the name of the video you're talking about?
@@yzirf_sharova 'Stability Calculations (Boatbuilding / Tally Ho EP125)' on the channel 'Sampson Boat Co'
can't wait for the first 3D printed aircraft carrier "USS gridfinity"
uss is for aircraft? I thought it was for boats
@tray84 lmaoo Aircraft *Carrier*
🎶 *Danger Zone intensifies* 🎶
@@tray84 keyword: carrier
@@8bitarmory846 y'all tryna make me look dumb. "USS is an abbreviation for "United States Ship" and is used to identify commissioned ships in the United States Navy. The prefix is only used while the ship is in commission, and before that it may be called a "pre-commissioning unit" or referred to by name without a prefix.
The abbreviation USS can also refer to any commissioned military vessel of the United States, including ships from the Coast Guard, Army, Air Force, and Space Force." -ai
"What is this? A BENCHY FOR ANT'S!? It needs to be... 3 times bigger than this! How is Emily suppose to have a lake adventure if she can't even fit inside the benchy? "
He's absolutely right.
True.. she has to sit INSIDE the cabin....
And also printed out of Petg so that you don’t need to keep it inside, oh and use a DJI power bank or somthin
Make the steering wheel functional
Exactly 😅
You’re supposed to throw all your old batteries in the ocean, how else do you charge the electric eels?
Hmmm?
Fr bro #savetheeels #dropyourbatterys
electric eels live in rivers for starters
@@thehiddencryptid you haven’t heard of the oceanic electric eels! See this is why we must dump our batteries in the ocean! There are so few left!
Styropyro ahh comment
4:25 THE MACROPLASTIC
💀dead 💀
If you were my daughter, I would be so proud of you. I am a mechanical engineer and you embody the essence of being an engineer. Being creative, pushing the limits and having fun at the same time. The world needs more people like you. Keep up the god work.
“We printed a small one and filled it with rocks”
The stock Benchy isn't seaworthy??? my trust in this entire industry is shattered.
I'm looking forward to seeing you print different (better?) propellers for the Macro-Plastic.
Dan: good job naming things.
probably depends on the infill. If you do variable infill you can probably make it bottom heavy enough for it to float. Flat bottom might also be an issue however, which is why you add a raft.
No, it is not. It's too top heavy. A while back someone redesigned the benchy to float a lot better, I'm surprised they didn't use that model instead.
Flex seal...ya know..the dude who slapped taped on a leaking pipe...flex seal..clear paint...done and done
you mean the guy that sawed the boat in half and then drove it :D
@@Der-Martinski And we now have the idea for another video.
"Yeah, remember our boat from earlier? We sawed it in half and put it back together with flex tape. We're still not sponsored."
This is the boat version of: "You wouldn't download a car!"
I like it!
This was hilarious! The 55lbs thrust motor was definitely overkill for something that size, but hey, why not go big? I love the manic energy on this video, and congrats on a really cool build!
Now when you hit a million subscribers make an EVEN bigger benchy that can hold 3 people, Paint it to prevent the SUN, and get a wendys 4 for 4
What's funny is I'm actually a part of the Tuggy community and someone has released the STL files to be able to 3D print a full sized Tuggy this exact same way.
Maybe that'll be next on the list. Here's hoping!
hello @hewfil1 do you mind sharing the community's link? thnx
Umm, yeah gotta give the deets on the Tuggy community! I've been thinking about building one recently!
I could use a tuggy
Link please 🙏
@@TheFutureLooksGrimm They keep deleting my responses lmao
Always take a backup paddle. This is my favorite project of yours so far. Excellent job!
and a backup battery too
they could 3d print a backup paddle, so obviously, bring a 3d printer
@@Ticktok_of_Oz Now we're cooking with fire!
On top of that, a small solar panel on top of the cabin of The Macroplastic probably wouldn't have added too much weight and, during the peak of the day, probably would have slowed the drain on the battery by a decent bit. It's all about redundancy!
Or sticks and a big sheet for an ad hoc sail
4:55 how else are we going to charge the eels
Why is this so funny lmao
Dr. Nefario!
@@Dailey100 We gotta charge the eels gru!
Spotto
3D printing a kayak or at least the farsteners for coroplastic sheets would be a noble cause.
This is exactly what TH-cam was made for all these years ago and I'm glad content like this (still) exists.
10:36 The fact that you corrected the part where he was lost but not the part where you and John abandoned him 💀💀💀
Or the fact that it was day 6
I couldnt believe this. 3 kayakers left one guy in a printed boat without a phone or paddle on his own, at sunset.
There's a bunch of small boat-builders that use bed sheets, diluted epoxy and coats of exterior house paint instead of fiberglass. It's very cheap and sometimes works better than fiberglass, depending on what you're sealing. When the boat is already largely waterproof, it's a decent option for smoothing the hull and adding just a bit of extra assurance it won't leak.
Where could I find their forums?
3:30
Founder of gloop: smart math solution
Emily: OOGA BOOGA
I love that it gives me the option to 'translate to english'.
@@rayrowley4013 Translation: OOGA BOOGA means OOGA BOOGA
(like no joke the translation did literally nothing)
@@Kalvinjj I know, thats part of what makes it so funny. LOL!
I have been printing for about 7 years now and COOL is an understatement! I absolutely love it. Great work!
Pretty hilarious watching you guys trial and error the basic boat knowledge that we take for granted as people who know some basic stuff about boats, having seen and been in many boats
"That's got to be the best pirate I've ever seen."
"So it would seem..."
8:43
The shenanigans were most excellent.
A major problem I see is that 3D prints are porous so over time this thing would fill with water due to absorption unless you give it some sort of clear coat or something.
yeah, i think the reason they didnt do a coating is specifically because the youtube comments would say "oh the coating is doing all the work its not really 3D printed at this point", but i mean, cant win with the youtube comments anyways. and the extra floatation tubes are way worse than a clear coat. also at this scale, im pretty sure the plastic isnt pourous enough to absorb water all the way through. the wall thickness has to be prettyyyy thick, as opposed to the usual thickness where the porosity allows for routes into the hollow parts.
they only needed it to work for one video though, so it worked out either way.
No, some aren't. You have no idea what you're talking about! Hint: there's more than one type of plastic, with different degrees of porosity!
I ve printed a lot of watertight things from pla and petg , it's only a matter of settings .. easiest way is bigger nozzle like 0.8 ,0.3-0.4 lh ,few degrees upper than normal temp few % more extr vol , lower speed and cooling ...
@@arcanealchemist3190 I really don't like these comments because the coating would only solve a minor issue. It's not like water instantly penetrates the plastic, it takes pressure and time. Sometimes people want to be annoying without thinking about how it really happens. But yeah 3D prints have these pores. The 3D printed submarine video proved this. Because submarines withstand pressure... Water gets in a lot faster. For submarines this is a major issue. But I'm going to argue that even carbon fiber isn't good enough for submarines... It has to be a very special steel alloy.
You're doing it wrong if your prints are porous.
It makes me so happy to see people from our state doing so much cool stuff with 3d printing. You and Dan are going places in the engineering world and I'm excited to see it.
using the top of a resin printer as a fancy waterbucket is wild - im impressed.
1:00 Is she using a top of the resin printer as a bucket?
I love that someone noticed….. yes
@@EmilyTheEngineer 😂😂😆
@EmilyTheEngineer bruh 💀.
To balance it, you need to get the center of mass (with a rider) as low as possible, relative to the water line. It is even advantages to put extra weight in the bottom, so the waterline rises. You could have filled the keal with sand or something, right when printing maybe.
You will always displace exactly as much water as you weigh, not more, not less. (assuming you're not sinking)
It's the VW Harlequin Golf of benchys! DAS BOAT!!
Also, deep cycle batteries are preferred for trolling motors. I had a plastic, one person boat and putted around a huge lake for three days. Probably 12 hours of motor time.
The amount of energy that's in an empty battery (below 30% is considered empty) is still enough to destroy itself.
@@paulmichaelfreedman8334 that's simply not correct. It depends a lot on the kind of battery. Lithium batteries, yes, they get damaged when depleted. Lead batteries, not that much, specially if they are kept correctly: en.wikipedia.org/wiki/Lead-acid_battery
@@almarma I know that, but most people think lithium when thinking of batteries nowadays. Lead-acid is an old tech now only used in established systems that have not been upgraded yet. And I think it should only be used now in situations where the specific properties of lead-acid make it uniquely suitable. Anyways, the "zero-point" energy (chemically speaking) is huge in lithium batteries.
About lead-acid, I know they can be deep-discharged way further than lithium, but with standard batteries you do have to watch out for dendrite formation. Absorbed glass mat batteries have way less dendrite formation and can be ultra-deep discharged with little to no damage. AGM batteries are sturdy as hell too, can smash a hole in them without the electrolyte spilling out, or very little. I dabbled a bit with batteries around 15 years ago, interesting business.
the opening to this video single handedly made me subscribe
She’s smart, funny, creative and this is one sic build! I’m really impressed! Not only am I going to subscribe and figure out how to support this channel, I’m going to buy my first 3D printer today!
For plastic lass just use polycement plastic glue, it works by melting the two surfaces together so you don't need epoxy and it'd be stronger and more waterproof.
Emily continues to impress but also terrify me with these ideas
Thumbnail has Myth Busters duct tape boat episode vibes lol, love to see it.
if MythBusters ever goes for another shot at a reboot, they should really get Emily and Dan
This is the 21st C version of that myth
@@antonventura6364 Give him a beret to wear and its a wrap lmao
Gives RCtestflight vibes! Should hookup with Joel to see if still has the big 3DP printer, we have the same at work it prints 1000x1000x700. We need an actual life size Benchy!
My 5yo daughter loved every single second of this adventure - thank you for sharing!
Just seeing this gave me the same whimsy and awe that seeing the pop boat in ponyo did. I'm so frickin jelly you have your own tiny boat
Awesome project, but hear me out - rocket engines in the pontoons! Also, yay Canada!
Or warp drives
Putting the pontoons on the hull like Star Trek nacelles is a nice touch
Super nice touch!!! Hell yeah
I was afraid I was the only Star Trek nerd who noticed that. Thank you.
this is modern art no joke, love this video so much im such a big fan of the whole Toy like thing being used for its more literal purpose. also the colors are really cool
8:26 there was a dog on that jet ski got me and my brother dying lol
Who sails on a Benchy, way out on the sea?
An engineer! Bold Emily!
Who somehow didn't drown on the way to Wendy's?
An engineer! Bold Emily!!
4:18 Cameraguy says his first two words and immediately has me in stitches! 🤣🤣🤣
The Macroplastic was an incredibly big brain name scheme 😂 Great video!
1:42 hey it’s just like a Tesla or Rivian
That looks like the cheapest boat you can buy in the game Sunless Seas. Definitely will explore the sea of eldritch horrors with this one.
0:31 is gold.
That line could be used with 90% of people.
I always love Emily's pure scream of glee when something goes right
How is this channel not bigger? This is exactly the content I need more of
You went through so many of the same problems as when i built my boat. Glad to know i am not the only one. I need to put mine in the water and post a video😅
I thought I had had a perfect day and then that pontoon fell off and I discovered that it could get even better.
This is magnificent, every part of this is unsurpassable.
The best part was that you could watch the pontoons slowly move back more and more and angle outwards until the one failed.
0:10 what about the people who printed a torture toaster first. huh?
yeah i DEFINETLY didn't do that
Good question
lol
I have never printed a benchy in 7 years of 3D printing. Fight the benchy hegemony! Benchemony? Whatever! ✊
@@radish6691lol
4:03 this phrase being expired makes me feel old
Swag and/or Yeet my fellow young person
Collect your complimentary joint pain at the door
I can't tell if this is a comedy or engineering channel and that's what I love about it. Thank you!
I appreciate the use of the term "cash money" like its still 2015. This is the kinda chaotic energy we need more of
When this bad boi shows up in the great pacific garbage patch in 30 years man it's gonna be a head scratcher XD Great video!
Sandbox boat? That's gotta be SaveItForParts 😂
4:33 one of the funniest jokes I have heard all day
*I literally choked on my water it's so good holy hells*
Absolutely BRILLIANT.
It really reminds me of Elmer the Patchwork Elephant which was one of my favourite stories when I was little, it looks amazing! :D
Wow, that looks boatiful. What a work of art. Van Gogh would be proud.
Her energy is so chaotic.
I love it
1:59 you can fit so many Emily in here
"I'm already walking a fine line with the environmentalists." First video of yours I've watched and you've got me hooked with you're sense of humor.
The original designer of the benchy boat would be so proud! :D
Ok my favorite part was you jamming on the water then the boat tipping 😂. That boast the best
I was watching the SpongeBob Aka Bean video "Again", And I went to go watch another, And then I see that you uploaded like.. 20 minutes ago? LITERALLY MADE MY DAY
This is the most amazing boat I’ve ever seen
that's got to be the best Benchy i have ever seen -so it would seem
Congratulations on your first long video reaching a million views! I'm saying it now at 700k+ because it's totally going to go past 1M. Love your content. Cheers J
Thousand Sunny when?!
oh hey look, its me!
Huh
I love you
@@BuildDanielBuild dawww
@@wandwuff help I'm stuck in a time loop
gotta love that she's so engineer minded she NEEDED it to look like the Benchy Boat, even though 99% of the mainstream audience watching would not care whatsoever about it having that specific look.
Thank you for keeping this at a reasonable length and extremely entertaining
Emily really gives me a younger Tech Tangent vibe, i love it
Fucking finally something ACTUALLY INTERESTING done with 3D printing.
Boating friend.
The RMS Pint-Tanic!! The printable yet unsinkable boat of our dreams! 😂 Not even an iceberg can sink it nor even when it flips over!! 😁🤣 Great little video keep up the great work!!💯🤌🏼💞🫡💯
4:40 FOR THE EELS
Cool video! Also, Lexel might work for waterproofing it. It makes permanent, flexible bonds, like what you would use to glue together EPVC reptile enclosures to waterproof them.
It's no Nylaug, but it'll do. Well done.
9:00 OH GOD, DID YOU JUST TIE OFF WITH THE ELECTRICAL CABLES!?!
Damn i was expecting the parts to dovetail together, would be solid af
This has definitely inspired me to get back on the idea of building my own tiny boat! Great job!
Yet another reason why Emily is the coolest engineer 🤩
Why am I only just now finding my fellow unhinged engineers?! I love this!
All of this was such a great video, but that ending after the bye was the best!
This is my favorite video in all youtube. Literally my childhood dream ever since i watched ponyo.
You know when someone has an idea that's so stupid it works? That's the vibe I got from you
Came from hackaday, glad that this gets the comments and attention to deserves! What a great build. Hope to see in the museum of 3D printing someday
something glitching with me. have watched this video like 40 times in the past 2 days. it's just so perfect
I always like how the protagonist is somehow unaware that everyone saw the thumbnail and read the title before clicking, which is exactly why we’re watching in the first place
Genuinely one of the best videos you’ve dropped
How has TH-cam only just now recommended one of your videos, this is amazing!
5:45 looks like "improvised combat benchy" with two torpedo tubes.
Instant sub. I don't even own a 3D Printer (yet), but I'm here for the chaos.