Have been club fitting and repairs for many years and Golf mechanic have put a lot of thought into making our job that bit easier.Well done on a great video. If you've got the tools it's so much more fun.
Jim I noticed when you were ready for the tape that you pulled out what ever length you needed . Great but where do you buy the double sided tape that doesn’t have the protection on the one side? I don’t think golf works sells that tape. If one doesn’t have to remove that protection piece prior to regripping wow how much faster it would make the process go.
if you are referring to the knife. The whole pulling back is more for the type of straight edge knife. The hook blade is tons safer. Ive used it for years without incident
I just started gathering new equipment to build my own small shop, do you have any recommendations of where to get grips wholesale, also like that golf Pride apron. Thanks
I wish they had gone with a self-adjusting clamp. Having to constantly adjust the knob to the shaft size gets tedious, particularly when switching between clamping the butt and tip ends of a shaft. Good review, however. Really gives a good look at the capabilities of this tool. Golfworks also resells this exact unit (and many other Golf Mechanix products).
You mentioned the it was 3 feet by 16" with then 3 more feet needed. So am I correct in saying that the full footprint when extended is 6 feet by 16 inches? I'd really like to know the full footprint as this doesn't appear to be mentioned anywhere. Thanks
Have been club fitting and repairs for many years and Golf mechanic have put a lot of thought into making our job that bit easier.Well done on a great video. If you've got the tools it's so much more fun.
Nick Brunyard no doubt, I’m finishing the putter bender now
Great video Jim! Makes me want to set up shop in my garage... 😁
Thanks David
Great review Jim
Jim I noticed when you were ready for the tape that you pulled out what ever length you needed . Great but where do you buy the double sided tape that doesn’t have the protection on the one side?
I don’t think golf works sells that tape. If one doesn’t have to remove that protection piece prior to regripping wow how much faster it would make the process go.
its more about the dispenser. it peels of the backing as I pull it out
Jim, do you have a preference of taking the backing off of the double-sided tape or leaving it on when you regrip?
It always come off
I thought that was a Kevlar apron. This vid proves me right.
if you are referring to the knife. The whole pulling back is more for the type of straight edge knife.
The hook blade is tons safer. Ive used it for years without incident
Awesome. That is a great tool for every club guy. Great review. Is that staying there or going into the other room?
Staying the shop, had to move some stuff around, it is nest to a wall with a new office trash can and heat gun
How did you measure the length of the tape using that dispenser?
I just started gathering new equipment to build my own small shop, do you have any recommendations of where to get grips wholesale, also like that golf Pride apron. Thanks
Pure, star, both do something if buy in bulk. Gp and lamkin only deal with distributors
Whats your opinion on using proper air tools to install grips ?
Great video! Throw away the scraper. ⛳👍😉
Im not much of a user but when the power goes out as it did today, a wonderful thing to have
I wish they had gone with a self-adjusting clamp. Having to constantly adjust the knob to the shaft size gets tedious, particularly when switching between clamping the butt and tip ends of a shaft. Good review, however. Really gives a good look at the capabilities of this tool. Golfworks also resells this exact unit (and many other Golf Mechanix products).
The one attribute I didn't mention was the adjustable height for the machine
Jim, you still using this? I like it but thinking it might not be worth the $$. Keep up the good work.
You mentioned the it was 3 feet by 16" with then 3 more feet needed. So am I correct in saying that the full footprint when extended is 6 feet by 16 inches? I'd really like to know the full footprint as this doesn't appear to be mentioned anywhere. Thanks
Id say you are correct. Keeping in mind the added three ft is due to the slide.
how to re-grip Putter on this machine
I would love to buy this machine, can you tell me the cost -availability - and shipping to Malaysia???
allen,
I would contact Golf Mechainx directly they are out of Singapore and the shipping maybe more favorable.
Who you got in The Masters this year McGolf?
Looking at Rickie and Phil as my LONG shot
Hey McGolf, is there a way for a fitter to fit a person into just a shaft I'd you want to use older iron heads? Thank you in advance sir
Josh Davis sure, go through the fitting process with the shaft in mind and then consider the type of head you currently have
@@McGolf TY sir!
Presentation where the review starts at 2:04
how do you re chrome irons? thank you
Jesse Ross no I don’t, that’s a very involve process that requires a large area. Check Golfworks for that
does that tape machine strip the backing off the tape as you pull it
What's the cost ?
Thanks
I dont have a real figure but check their site or golfworks, its typically the same. Im guess at $500
@@McGolf unfortunately in the UK I can't get golfworks website any more due to new privacy laws. 😫
Steven Tait that’s unfortunate, then look at the golf mechanix site