Bosch 24V Rotary Hammer Drill Restoration | GBH 24VF
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Bosch 24V Rotary Hammer Drill Restoration Video
Original Battery Pack (Nimh)
20 cells x 1.5V = 30V (Nimh 1.5V fully charged)
New Battery Pack (Lithium)
7 cells x 4.2v = 29.4V (Lithium 4.2V fully charged)
Capacity 4Ah (In the video 6Ah is not correct)
Battery lithium cell
Brand Dmegc
Model INR18650 20P
Capacity 2000 mAh
Typical voltage 3.7V
Internal resistance (1KHz) ≤ 18mΩ
Standard charge and discharge current 0.5C
Standard charge and discharge cut-off voltage 4.2V/2.5V
Maximum continuous charge and discharge current 2C/20A
Cyclelife ≥ 500 times
Size 18 * 65 mm
Weight 45g
BMS 7S30A
Rated working voltage 30V
Rated discharge current 30A
Peak starting current 60A
Overcharge protection
Over discharge protection
Overcurrent protection
Short circuit protection
Internal resistance 10 m Ω
Current consumption 15 μA
Operating temperature -45°C to 85°C
Physical dimension L60*W23*T5mm
I hope you find this video useful and enjoy!
I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did this video !!!
** I still keep some parts, I want to help preserve the world environment **
Thank you very much for your likes, comments and subscribe!
Have a nice day
Gear Show
Querido Angel usted es un hombre muy virtuoso e inteligente y le agradezco mucho tanta ayuda y enseñanzas que nos brinda muchas gracias de todo corazón
Your battery pack rebuilds are the best👌
Ya mind blowing
This one was fairly easy to pull out since it had the parts to be removed, and I love that in such battery powers Tools, it's easy to replace batteries from the core
Thank you very much!
@@freemanontheland24 ฟฟฟฟฟฟฟฟฟฟฟฟฟฟี . ่.อ้อี เธอฮา
ល
What a beautiful job and results, congratulations. I will never do this job but I enjoyed it as you have no idea, I have seen the video completely and the Makita drill conversion from wired to 18V thank you from Queretaro Mexico.
Otra estupenda restauración de taladro percutor rotatorio Bosch 24V | GBH 24VF, mis respetos y saludos desde Venezuela.👍💯👍👊🤘
Muchas gracias, me alegro mucho que este video aparezca en Veneuela
Love these early cordless drill designs. They basically mated a fat battery pack to a regular cord drill chassis. Nice finds at your shop
I think he finds them at a scrap yard but they are very well preserved and I love that
I found it form Japan power tools recycle shop.
@@gear_show Do you live in Japan?
@@danesz021 nah, i think he just flown there to buy a scrapped hammer drill to restore ;) :)
Your Hammer Drill Rebuilds Are Amazing!!
The Ingersoll Rand 114GQC Air Hammer th-cam.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
I'm a professional electromechanical repairman ... not necessarily a very advanced one ... but I like to upgrade like this too ... I bought a bosch Jigsaw 24v with nicdm batteries and I tested it to see if it supports 36v batteries li ion from bosch .... total success ... I managed to change the tool housing and the battery slides and connects like 36v tools .... the coupling was successful and from the outside you almost don't realize that it is not so provided by the factory even as the size in length fits incredibly .... operation ??? impeccable ... I have been using it for some time, there is no sign of overload or due effects of the larger battery ... or stress of any kind
in this conversion there is also the advantage
that I use the original charger for 36 v batteries because I did not use the tool battery ...
the effort was especially worth it because there are some tools from the old generation that are higher in quality than those from the new generation
bosch Jigsaw 36v are few tools to compete with this
I have to somehow make a movie with him and put on yotube
yes, please make a video and publish it on youtube
Some really do have a lot of time and patience. One not one of them but I do enjoy watching these videos.
Glad you like them!
Good work! Nice to see professional man's job🙂
Комментарий в поддержку канала и ролика, а также труда мастера который отреставрировал отбойный молоток.
I like the way another drill "repairs" another drill throughout the restoration
Excellent restoration bonus with battery upgrade better than factory.
Thank you! Glad you like them
Amazing, it took me 2 days to renovate and then replace the batteries the batteries in my 35 year old Bosch hammer drill yet it only took you 22 minutes.....Well done.
Raj
Great technique ☝️👍👍👍
Thank you!
Oh new video 👍👍🤩🤩
Hope you enjoyed it!
@@gear_show for sure
Wonderful restoration of a mammoth Bosch SDS Drill.
Yes, thank you
Saving the planet one battery powered tool at a time. Great job!
Yes, thank you very much :) You're always watch my video.
Subscribed. My favorite toll rebuilt channel on TH-cam.
Tohare paas sb suvidha baay bhaiya.......mauj kra....,,🥰
Best rotary hammers out there are Bosch.
Un profesional trabajando ⚒
Saludos desde Costa Rica 🇨🇷
Very nice Thanks you so much
Best drill I ever owned!!!!
Meraviglioso lavoro
Grazie!
Thanks 👍👍
شكرا لكم اخي دائما مميز
You're welcome!
1:03, opens battery pack, finds spider nest. "There's your Problem!"
Yes, it is haha...
Hermano,que buenos videos quisiera tener tu habilidad.
أحسنت صنعنآ 👏👏👍👍
Thank you!
Wow fantastic work
Can u plz tell how can I get that charger on amazon
There are a lot of them on Amazon you choose it.
www.amazon.com/s?k=29.4+volt+charger&ref=nb_sb_noss_1
@@gear_show OK thanks a lot
@@gear_show can u send me a link for Indians rs it is showing dollar
You are true professional,amazing good job.
Thank you so much 😀
I'm no expert but I noticed that you changed the battery terminal wire but you didn't change drill motor wire.
I think you should change that too because that can also be in bad shape and lithium battery's are powerful. to conduct that power you should use better wire To get the maximum output from the device.
By the way that's a great restoration
Okay, great idea! thank you so much for sharing.
@@gear_show Im happy that I helped you notice your only error
Fantastic
Simple smart restoration
Glad you like it!
the internals of the drill are in very good shape
Amazing restoration ! - Well done - Great outcome ! :)
I like to see it right away to see it 👍👍👍👍👍
Yes, Glad it is right, thank you!
Bosch powertools, are very great , soilds built of tools..early years, many company 's want to copy 's the best ....now,best tools , repairs...open everything 's.... looks,same as other branded .....
انته الافضل دائما
Thank you!
Very nice 👍 work Man 👍
Thanks 👍
Thanks 👍
Thanks 👍
👍
I thought this channel couldn't get better, but then you added funny slow motion. Keep up the awesome work!
This „Made in Germany“ hammer drill is a beast. Great to it in future times.
It sure is!
@@gear_show if you can convert it to brushless it would be even better
Looks like 2000mAh cells, but it doesn't matter. Try to make double nickel strip between all series. Now between 5-6 and 6-7 is a single strip. Anyway, top quality video as usual, pleasure to watch.
Very creative and cute👌
Many many thanks
Yeah new video
Yes
My favorite part is the plastic parts cleaning
Oh, really! I think that part is not important.
Cái đầu kẹp mũi khoan đó mua ở đâu vậy bạn
Wowwwwww sir amazing
Thank you!
Excellent review. Thanks.
Very welcome!
Nicely done 👍👍👍Thanks for sharing
Thanks for watching
Sir which solvent is a better cleaner for gear box parts, diesel or petrol? The one you use in ultrasonic cleaning? Can you please suggest the best cleaner? Also can you make a video of repairing the variable speed controller of this machine?
Super👍🏻
Thank you 👍
It will work for many years again. 👍
Really good 🛠️
Thank you sir
Amazing !!just what I was looking for ,for many years!!!Can I re-use the original charger?
Good hit🇮🇳👍👍
4:25 best part of any restoration
Cool stuff 👍
Thanks for the visit
Pls more bosch drill
Yes, I will try to find them.
@@gear_show you are the best
Bosch brand it’s very strong I like it
Good job 👍🏻
Small tool, big power. So relaxing to watch Your videos!
Great work!
Thank you!
Nice job
best Restoration ever
Good work
15:56
Nice sissors.
Also thanks for the information in the description and I hope you mention the prices for the parts you used in this video.
Awesome job
Thanks for the visit
Another fantastic restoration and camera work. The hammer drill battery rebuild is awesome also. You should have Sky make a brief appearance in more videos. The general public love that stuff and me too. Doug & Skye USA
Q2⅔e³⁴⁵⁶⁷⁸⁹⁰
P
Sweetheart and cool content bro
Thank you so much bro :D
I have a black & decker power drill/ screw driver but the battery was dead. The whole set was bought ten years ago which is around usd60 with 2 battery packs bundled. Used a couple of times only and looks brand new. I asked the shop and they do not have a replacement battery pack. Then I found that buying 10 pieces of 1.2v NiMH cell may cost more than usd60.
Hermano de @Gear Show una véz más realizastes excelente trabajo... Te Felicito, la Herramienta quedó mejor que original de fábrica. Fuerte Abrazo y Saludos desde Venezuela!!!
im impressed that you can connect all parts at the end,Nice
Beautiful dear
very nice video
you are so good
Good
Thanks
Just wow
Thanks
Good job
2:16 , that would make an excellent poster! Or wallpaper background.
Wow, I'm happy to hear that, thank you!
Well the video is in 1080p. You can just take a screenshot.
@@KISSFanDan1995 I may just, but a poster would be a real prize.
@@jdniedner that’d be awesome too.
Great job
잠자기에 딱 좋은소리👍 백색소리👍
Hi, can you give me a link of the chuck? I need a newone for my 24vre and cannot find...thanks, great video.
Brilliant
Thank you!
O melhor de todos
Thank you!
Wooo them cells is duuuun
You are great
Good work..!
Красава мужик- cool man
Hello.
Did you use the old original control unit (the same one that worked with NI-MН) or replaced it with a new one designed for LI-PO?
Regards, Ivan
Great patience, great work! Well done! 🔥
Yes, thanks
I have the same drill, good renovation. I will try too
OH, i have one of these. Good little machine, the battery was junk tho. I got an adapter that used a different set of batteries, from a different brand, then i 3d printed one that uses modern Bosch batteries recently.
maybe was fake battery
Thanks for sharing
2:17 В идеале.
Perfect
Yes, just replace carbon brushes
@@gear_show Excuse me, are you from Japan? I am glad that your videos are watched in my homeland (I am from Ukraine). I just want to note that accelerated video material spoils the atmosphere a bit, but I am glad that you bought a 60-frame camera, or finally decided to record material at 60 fps. It should also be noted that on the packaging of lithium-ion batteries your channel is the top. I personally watch you along with my mechanics and TysyTube Restoration. Thank you for your efforts, as we say in Ukraine
"гарно є" :D
5:00 are you sure its gasoline 😜🍷
Yes, it is gasoline :)
@@gear_showno its johnny walker😂
Esse cara e fantástico parabens
perfekt may frend.
Просто круто 👍👍👍👍👍
Love you man
Thank you so much!
@@gear_show bro plz made video on unboxing
@@gear_show also reveal your face
PPE is very importat! nice to see!!! Love your videos!
Yes! Thank you!
СПАСИБО ЗА ВИДЕО!!!
ПОЖАЛУЙСТА
Why not use the ultrasonic washer for plastics also?