Hey Grant! Another awesome video. I think it's so cool watching you go from a farm on Fs to an actual real farm. And what's even better is that we get to watch a farm being built from the ground up. So thank you for taking us along for the ride.
Hey Grant. A kind piece of advice... We put our scv for the hydrolic that controls the lowering of the implement in flote so that there is no pressure on the pumps. Hope it helps
Since you've got that nice of a shop Grant get a 60gal air compressor, a 1/2 air impact and 3/4 air impact and later down the road a 1" impact. All those adapters on that breaker bar were causing you to lose torque. Invest in a 3/4 and 1" socket sets for impacts. OTC and grey pneumatic make some of the best large socket sets I've ever used. Air cat makes some really nice afortable air tools as well. I use a 3/4 air cat gun almost everyday as a heavy truck mechanic. Try to pull towards yourself when breaking something loose by hand, I know it's not always that easy and or doable just a good habit to have. Awesome video as always.
@@granthilbert5632 the new high torque battery impact wrenches are better than air imo. Our dewalt 3/4 high torque does anything our 3/4 air impact does and the Milwaukee’s and Makita’s have a lot more torque than the dewalt. Watch some of torque test channel’s videos and make your decision from there.
@@briscoesjug1026 DeWalt vs Milwaukee Ford vs GM Deere vs Case Fanboys will argue to the end of the earth about what's better. We have had good luck with our Dewalt but as I already said other brands have better performing impacts.
@@Jaxon-iu6vb all depends, especially price points but having air tools is always nice, not waiting on batteries to charge, or when the battery is dying it can really tax battery tools
We did a plywood ping pong table last year and my buddie and I had so much fun with it in my shop. Probably one of the best ideas we have had . Not quite regulation though . Lol
Wrenching is just part of it when you’re working with equipment, whether you’re farming, excavating, trucking, or doing anything else related to equipment! You have acquired some really nice equipment to start out with. I’ve enjoyed seeing your journey over the first year of your farming endeavors! It’s great that you can work with your brother as well.
Third generation farmer on our family operation and I have a great deal of respect for you starting this farm! Definitely invest in quality impact sockets and a good air compressor. Also if you get a torch you can heat up seized bolts and nuts to help release them with an impact wrench.
Hey man I would just like to say I love your videos me and my dad would always be in a tractor together and sense we moved we can’t do that anymore and I want to be a farmer when I grow up but there’s nobody to give me the farm and I’m happy for you for following your dreams and see that your having a good time like me and my dad all ways had😄
Crankcase ventilation tube is what it’s called. Also check to see how much blow by there is. If there’s a little then it’s ok. But if it’s excessive then there is a problem.
Will be checking it out👍 I've added about a 1/2 quart of oil in the past 250 hours. I'm planning to take into shop to check everything over this winter.
Grant, have you looked at used grain bins? I just looked on CL? I looked around Des Moines. Saw a few @$1 a bu 7000-27000 bu. 7000 is small. But you could keep combining after elevator is closed for night. Have small part of harvest to deliver later. Or larger part of soybean crop. A 25,000 bu if under 16% you could store short term with just air normally.
Really enjoy your videos. As a non farmer, I’m interested in the economics of farming. Could you do a video on the investment of seed, fertilizer, herbicides, compared to earnings off yields?
The oil is coming out the blow by tube that's usually not a good sign, you should watch it closely to see how much blow by is coming out while it's pulling, a couple drops here and there is acceptable but that looked like a pretty good amount, monitior for oil consumption while your pulling it hard, you may have a cracked pistion ring
He man not being negative or anything just be careful under that hydraulic equipment a line could burst and it could fall we usually use cylinder stops or put a jack under it love watching ur videos man🤘🏻
Keep up the outstanding work as always! Went hunting today and got two 8 pointers by accident! Hope all is well! YEEYEE and have a good one! For fs 22 on the first rp can you use a johndeere 8970?also you know its a good video when your playing ping pong in front of an sts and an johndeere 8110! Lol
Invest in some sockets for that bar. Also impact over chrome. All those adapters were taking away from your torque. Yes a torch would help. I’m also baffled buy the bent depth adjuster. I would have to see that implement in person to really understand that one.🤯
Hey grant! That tube is a blow by tube! I would run that tractor and see how much blow by you have and if it seems excessive I would look into piston rings ext. you can also call the dealer to ask questions on how much blow by is too much!
Yes get a torch! You will use it a lot more than you realize! Also learn how to weld and get a welder! Don't you know Farmers have to learn to do all the jobs! Keep up the great work!
nice video, hope your hand feels better i have done that a few times myself. Now i wear gloves if i have to do anything like that. how is the hand? make sure to ice it if you can.
Nice video I think you end up buying that chisel plow from the farmer your renting it from. Or try to look if there’s any for sale seems perfect for your farm
Hey Grant, that bend may be from the check valve that releases the pressure from the hydraulic ram, if there is constant pressure to the shaft and the check valve isnt working properly, that may be your issue? Anyway, keep up the good work man :)
Having been the victim of many scraped knuckles and smashed fingers myself, I was wincing the whole time you were working on those nuts. Get some good penetrating oil it saves a lot of frustration.
Hey Grant get yourself some Schaeffers Penetrate, thats the best stuff out there, its a little more expensive but you’ll definitely get your money’s worth out of it.
Hey get a bucket and some lids like at my grandmas farm I don’t know what the lid is called but you put gas in it and fill up your fourwheeler remotely
Hey Grant! Another awesome video. I think it's so cool watching you go from a farm on Fs to an actual real farm. And what's even better is that we get to watch a farm being built from the ground up. So thank you for taking us along for the ride.
Hey Grant. A kind piece of advice... We put our scv for the hydrolic that controls the lowering of the implement in flote so that there is no pressure on the pumps. Hope it helps
Since you've got that nice of a shop Grant get a 60gal air compressor, a 1/2 air impact and 3/4 air impact and later down the road a 1" impact. All those adapters on that breaker bar were causing you to lose torque. Invest in a 3/4 and 1" socket sets for impacts. OTC and grey pneumatic make some of the best large socket sets I've ever used. Air cat makes some really nice afortable air tools as well. I use a 3/4 air cat gun almost everyday as a heavy truck mechanic. Try to pull towards yourself when breaking something loose by hand, I know it's not always that easy and or doable just a good habit to have. Awesome video as always.
Was planning on getting some bigger impact sockets set this year. Would be nice to have!👍
@@granthilbert5632 the new high torque battery impact wrenches are better than air imo. Our dewalt 3/4 high torque does anything our 3/4 air impact does and the Milwaukee’s and Makita’s have a lot more torque than the dewalt. Watch some of torque test channel’s videos and make your decision from there.
@@Jaxon-iu6vb with DeWalt all your paying for is the name not the product
@@briscoesjug1026 DeWalt vs Milwaukee
Ford vs GM
Deere vs Case
Fanboys will argue to the end of the earth about what's better. We have had good luck with our Dewalt but as I already said other brands have better performing impacts.
@@Jaxon-iu6vb all depends, especially price points but having air tools is always nice, not waiting on batteries to charge, or when the battery is dying it can really tax battery tools
We did a plywood ping pong table last year and my buddie and I had so much fun with it in my shop. Probably one of the best ideas we have had . Not quite regulation though . Lol
@FANAZA:⭕️ reported
@FANAZA:⭕️ reported 2nd time
Wrenching is just part of it when you’re working with equipment, whether you’re farming, excavating, trucking, or doing anything else related to equipment! You have acquired some really nice equipment to start out with. I’ve enjoyed seeing your journey over the first year of your farming endeavors! It’s great that you can work with your brother as well.
Third generation farmer on our family operation and I have a great deal of respect for you starting this farm! Definitely invest in quality impact sockets and a good air compressor. Also if you get a torch you can heat up seized bolts and nuts to help release them with an impact wrench.
Now that’s REAL farming - working on / fixing equipment 💪
Love the taste test of the dip stick !! Stay safe and warm, see you next time
Havent even watched yet and i can already tell this will be great
@FANAZA:⭕️ yup me again... reported
Hey man I would just like to say I love your videos me and my dad would always be in a tractor together and sense we moved we can’t do that anymore and I want to be a farmer when I grow up but there’s nobody to give me the farm and I’m happy for you for following your dreams and see that your having a good time like me and my dad all ways had😄
Crankcase ventilation tube is what it’s called. Also check to see how much blow by there is. If there’s a little then it’s ok. But if it’s excessive then there is a problem.
If it’s puddling up on the floor,,,,, not good. Especially because he’s working it and it’s doing that. Not a good sign.
Will be checking it out👍 I've added about a 1/2 quart of oil in the past 250 hours. I'm planning to take into shop to check everything over this winter.
@FANAZA:⭕️ get that trash outta here
Every farmer needs to play ping pong in their cold storage shed with their brother it is actually pretty interesting
Love the videos dude! Just letting you know you sinned big time with the chrome sockets on an impact. Lol
Grant, have you looked at used grain bins? I just looked on CL? I looked around Des Moines. Saw a few @$1 a bu 7000-27000 bu. 7000 is small. But you could keep combining after elevator is closed for night. Have small part of harvest to deliver later. Or larger part of soybean crop. A 25,000 bu if under 16% you could store short term with just air normally.
Really enjoy your videos. As a non farmer, I’m interested in the economics of farming. Could you do a video on the investment of seed, fertilizer, herbicides, compared to earnings off yields?
The oil is coming out the blow by tube that's usually not a good sign, you should watch it closely to see how much blow by is coming out while it's pulling, a couple drops here and there is acceptable but that looked like a pretty good amount, monitior for oil consumption while your pulling it hard, you may have a cracked pistion ring
checking the oil was really funny great video
Been running m18 impacts, the new electric impacts are very impressive, no hoses no air
He man not being negative or anything just be careful under that hydraulic equipment a line could burst and it could fall we usually use cylinder stops or put a jack under it love watching ur videos man🤘🏻
I'm impressed how bright those lights are
For the algorithm. Likes, comments, shares, and subscriptions help your content creators more than you realize. Keep it up Grant!
I’m sure he realizes, he isn’t new to TH-cam. Has other channels.
@@landonkaufman1165 I wasn't saying it to him. I was saying it for people that view his videos but thanks for the comment Landon.
@FANAZA:⭕️ reported
@@landonkaufman1165 easy killer he knew what he was saying
Tha is for not dropping the f-bomb. Sometimes my son watches your videos with me so I appreciate it.
Keep up the outstanding work as always! Went hunting today and got two 8 pointers by accident! Hope all is well! YEEYEE and have a good one! For fs 22 on the first rp can you use a johndeere 8970?also you know its a good video when your playing ping pong in front of an sts and an johndeere 8110! Lol
The 8110 just watching Grants butt getting kicked at ping pong. Love vids, it’s really turning into Farming Simulator into Real life farming
O boy that looks like a knuckle buster!
Invest in some sockets for that bar. Also impact over chrome. All those adapters were taking away from your torque. Yes a torch would help. I’m also baffled buy the bent depth adjuster. I would have to see that implement in person to really understand that one.🤯
Agreed on the sockets, I used to wrench on heavy equipment and have seen chrome sockets shatter on an impact
Hi squad I love your videos keep up the great work
@FANAZA:⭕️ 🖐️🖐️.... reported
Yall get it keep working at it!!!
This about to be a banger!!! Keep up the good work
@FANAZA:⭕️ reported
Awsome video grant just a suggestion but you should get atleast impact sockets chrome sockets will break on you then you will smash more fingers 😆
That 8110 is a cool tractor I want my dad to get one for his farm
@FANAZA:⭕️ reported
Just realized this guy from the farming sim channel TheSquad!!
Things are coming along nicely. Also those gas prices you got are nice. I just paid $4.49gal here in northern cali.
Love the videos grant. Keep up the great work
Hello from Canada great videos
Y’all are good at ping pong
hey grant, you thinking of putting duals on the combine sooner or later?
Planning on keeping it as is👍
Could you possibly do a quick run down on the tiling and explain how it works a bit more? Great vids grant! Love seeing the come up
Love your content keep it up
@FANAZA:⭕️ reported
Buy a handheld butane or map torch. They work great for smaller jobs.
You should use some big pieces of cardboard to lay down when you are working on stuff help keep the floor clean 👍
You are my favorite youtuber great work
@FANAZA:⭕️ 🖕🖕.... reported
Nothin like breaking down! But how the heck did that bind I am baffled but I guess just don’t ask questions
Hey grant! That tube is a blow by tube! I would run that tractor and see how much blow by you have and if it seems excessive I would look into piston rings ext. you can also call the dealer to ask questions on how much blow by is too much!
You should try and inline rip your fields. Helps get rid of a lot of compaction help bring up your yields a little
Yes get a torch! You will use it a lot more than you realize! Also learn how to weld and get a welder! Don't you know Farmers have to learn to do all the jobs! Keep up the great work!
nice video, hope your hand feels better i have done that a few times myself. Now i wear gloves if i have to do anything like that. how is the hand? make sure to ice it if you can.
How many hydraulic remotes does a 12 row planter like yours take
The oil is coming out of the blow bye tube
Definitely should invest in a big air compressor and air impacts with our DMI eclo tiger we can’t get most of the bolts off without a air gun
farming simulator 22’s graphics are amazing!
Omg i have those boots and keep up with the farming vids
Please explain what you mean by putting tile down or putting tile in
You look like the little boy in the film Sleepless in Seattle all grown up.
love your vids keep up the good work
Do weights on the outside duals put too much stress on the axles?
its put some but not a bug deal. my one neighbour runs tripples and they are all weighted up.
You should probably install drain tiles in your field so it distributes the water that goes into your field evenly
How wide is that ripper Do you follow corn stalk rows and how many rows does it cover
Nice video I think you end up buying that chisel plow from the farmer your renting it from. Or try to look if there’s any for sale seems perfect for your farm
Hey Grant, that bend may be from the check valve that releases the pressure from the hydraulic ram, if there is constant pressure to the shaft and the check valve isnt working properly, that may be your issue? Anyway, keep up the good work man :)
Every time I laugh out loud at the oil tasting Grant. Please don’t ever stop. I liked the ping pong match, but wasn’t Spence taunting???
At least college taught you ping pong !!! Ur parents will be proud !!!
Pull some tile in those problem areas yeild will increase 20 to 40% in those areas
You guys would give Forest Gump a run for the money at pingpong!!
All disel engines have some kind of vent tube
That is a pcv tube. Not sure on yours but the newer Deere's have a filter too change every so often
Love a bit of yellow, but it might be time to buy the Milwaukee 1000nm 6amp hr, and keep her in the cab……
A question did you buy all of the things with TH-cam money if did or not it's still cool how you went from fs15 to irl
This might be dumb but you should make a poster with the times when stuff closes on in convent places.
What app for your ipad do you use for the yield monitor?
Having been the victim of many scraped knuckles and smashed fingers myself, I was wincing the whole time you were working on those nuts. Get some good penetrating oil it saves a lot of frustration.
😂👌🏻
Hey Grant, love the video. I was wondering what kind of drone you have? I have been trying to find a good one that’s takes good videos.
Get the best Dji drone you can afford. They're the best.
@@justinmurray4397 ok. That’s what I have been looking at
I just wanted to ask how much u payed for that tractor bc we have a 12k tractor that has 10 more hp and is a little less nice
Keep it up love the vids
@FANAZA:⭕️ me again..... reported
That tube is an oil blow by tube that’s normal. I’m a John Deere mechanic. Just check your oil regularly
cheater bar will be your best friend on just about everything
Look how many breakdowns are in Cole the cornstar your doing good
Normally you want to work at a slight angle to the rows…. Works the stocks down better!
Y'all need to put a pool table in the shop
get a compressor and an air gun, and the correct size socket sets for the gun they make a huge difference without adapters
Maybe you neet the rental man buch and his service truck lol
Love the content grant😃❤
@FANAZA:⭕️ guess who.... reported
ATV front suspension arm handing down eh ?
Use a "cheater pipe" to assist with the breaker bar :)
Kevin in public it's a torque amplifier😁
I don’t have anything to comment but I’m putting this here just to contribute be safe
Do you have a grain cart
good video grant
You need a Milwakee 3/4 inpact.
Keep up the good vids
Happy Thanksgiving Blessings
Hey Grant get yourself some Schaeffers Penetrate, thats the best stuff out there, its a little more expensive but you’ll definitely get your money’s worth out of it.
You getting grain bins next year
I am a farmer and I’ve never seen anyone taste their oil what is that for?
You gotta get a big cheater pipe to go on the end of the breaker bar. Also invest in impact sockets. They won't lose as much torque
Hey get a bucket and some lids like at my grandmas farm I don’t know what the lid is called but you put gas in it and fill up your fourwheeler remotely
Just makings sure my eyes are working, did he use chromies on an impactor?
i sure hope you have the ripper locked up before you get under it !!!!!
I’d ask if I could buy that ripper he hadn’t used it in 10 years you said
Where’s the backspin and side spins!?
Are you going to get one