Hi, thanks for your video! I tried doing this on my ford mondeo 2014 but when I put in the used abs unit it could not find as built information. I tried abs reset and initialize/relearn abs but still wouldnt turn the car on. Also tried saving my abs data from my original one and loading it onto the used one but the data seems to be the same. I'm not sure what to do, if you could point me in the right direction I would really appreciate it. Thanks
Comes up with an error when trying to add a spare key . [20:28:59.352] Module returns incorrect outcode. It means the module is out of normal state. [20:28:59.361] Recommendations: - Make sure there are no wire/connection problems between modules - Try to reset module using service function "Module Reset" (if available), or by disconnecting the battery for 20-30 minutes - Try timed access (if available)
when trying to calibrate the longitudinal acceleration sensor , and going to write it all i get is module configuration not getting configuration option in the write section
Lol you keep saying forscan in the video. But you told them you have a autel...mannn that's trash information and we can barely understand you for 1😂😂😂😂next
Thank you for the info. I have 2009 F150 Platinum and I grabbed an ABS unit from a salvage yard. despite the coding being correct I'm still a configuration code. any thoughts or assistance would be appreciated. Thank you for the content.
I am trying to retrieve AsBuilt for ABS and PS modules for 2014 Ford Fusion SE 2.0, and when it tries to download, it fails, "server not available". Is this only for paid customers? Or are servers down now?
Do you know if this is a similar process to be done if changing an abs pump on Mondeo 2015 would it just be a case of performing the service functions for the sensors please tia The customers going to be using his old module with a brand new pump
Hello, is it also possible to program the current abs module in that way? Since the new abs sensor has been replaced, but reports fault code ABS U2300:51-2B. The code in question cannot be removed with any reset program, not even Forscan.
Thanks for your video. I replaced the electronic module of the ABS on a 2011 Ford Explorer. The old module was not readable and I was not able to retrieve old data. I was able to program/add the as built data using Forscan. I now have error code U2100:54 - Initial configuration not complete-missing calibration. I do not have a tab for ABS Module Initialization/relearn from central configuration to initialize the ABS module. Any suggestions.
I've fitted New/ Second hand module. Followed your instructions :abs module initialization/relearn from Central configuration but my service procedure is not supported. Any clue why not??
@@ADDAUTOMOBILESERVICES Yes. I originally bought an ABS module for 2010 model but was wrong. I realised this when I took it out so ordered the right one. Unfortunately I can't say for sure whether the New/ second hand is OK, so maybe I might have to order another one. The Problem is to buy complete newfrom Ford it is £2k😂
Thank you SO MUCH for this video! Can i ask a dumb question...in forscan it will get the original abs module data directly from ford? I dont need to plug my old unit back into the truck to get the abs mod info?
@@ADDAUTOMOBILESERVICES I have a 2011 f350 6.7 is there a way to check to see if they have the "as made" data for my truck before I start the process? Sorry for all the questions. Thanks for all your help!
@@ADDAUTOMOBILESERVICES just wanted to let you know it worked for my 2011 f350! I can't tell you how happy I am. I would've had to wait 2wks for the ford dealership to get me in not to mention whatever the shop bill would've been. I owe you one man! THANK YOU!
Hi great video. Would this be possible on a 2015 fiesta. I want to replace the faulty abs unit for a second hand one off eBay with the same part number. I have forscan on my laptop already.
Hi thanks for the advice, the as built file did not contain the abs information but I did the reset and relearn central configuration and it works. I need to replace the IPC on this 2015 fiesta as well, I have the as built info from the current one but I am not sure if the IPC is on the pats security, I don't think it is but any advice would be good.
be warned if the imobiliser runs through the abs module you can configure the module but the vehicle will not start unless you match the module to the pats system
Solid work bro
Thanks boss
Very good detailed guidance! Followed each step and was able to program a used ABS module.
👍👍👍
I can use an module for other ford car? like an Focus module on fiesta? And reprogram it?
Yes
@@ADDAUTOMOBILESERVICES Nice, I Saw an volvo v40 with same module too 😅
Hi, thanks for your video! I tried doing this on my ford mondeo 2014 but when I put in the used abs unit it could not find as built information. I tried abs reset and initialize/relearn abs but still wouldnt turn the car on. Also tried saving my abs data from my original one and loading it onto the used one but the data seems to be the same. I'm not sure what to do, if you could point me in the right direction I would really appreciate it. Thanks
Any update
Comes up with an error when trying to add a spare key . [20:28:59.352] Module returns incorrect outcode. It means the module is out of normal state.
[20:28:59.361] Recommendations:
- Make sure there are no wire/connection problems between modules
- Try to reset module using service function "Module Reset" (if available), or by disconnecting the battery for 20-30 minutes
- Try timed access (if available)
Can you please help
Pls what is the year and model
What are the fault code when you diagnosis it
when trying to calibrate the longitudinal acceleration sensor , and going to write it all i get is module configuration not getting configuration option in the write section
Change the as-built data
Friend and what type of interface do you use?
Maxivci v100 from AUTEL
I have the autel thinkdiag 2. Will this work?
@enanoracingteam550 yes
Lol you keep saying forscan in the video. But you told them you have a autel...mannn that's trash information and we can barely understand you for 1😂😂😂😂next
@Godbodyent. That is the AUTEL vci
Thank you for the info. I have 2009 F150 Platinum and I grabbed an ABS unit from a salvage yard. despite the coding being correct I'm still a configuration code. any thoughts or assistance would be appreciated. Thank you for the content.
Are the part numbers the same
I am trying to retrieve AsBuilt for ABS and PS modules for 2014 Ford Fusion SE 2.0, and when it tries to download, it fails, "server not available". Is this only for paid customers? Or are servers down now?
Yes paid customers
I have problem on ford escape hybrid 2010. Obd written abs brake booster solenoid but one moment its work another time not work. Can i do like this ?
Fix the issue or change the unit
do you think if replace PCM and ABS module from one working to another working 2006 ford escape hybrid this is going to work
If the part numbers are the same
Do you know if this is a similar process to be done if changing an abs pump on Mondeo 2015 would it just be a case of performing the service functions for the sensors please tia
The customers going to be using his old module with a brand new pump
No need
Hello, is it also possible to program the current abs module in that way? Since the new abs sensor has been replaced, but reports fault code ABS U2300:51-2B. The code in question cannot be removed with any reset program, not even Forscan.
Rewrite the Vin on the vehicle abs module or if still showing change the abs module
@@ADDAUTOMOBILESERVICES Stupid question, where can I find that vin?
From the pcm. What machine are you using
Thanks for your video. I replaced the electronic module of the ABS on a 2011 Ford Explorer. The old module was not readable and I was not able to retrieve old data. I was able to program/add the as built data using Forscan. I now have error code U2100:54 - Initial configuration not complete-missing calibration. I do not have a tab for ABS Module Initialization/relearn from central configuration to initialize the ABS module. Any suggestions.
Try abs module calibration for the steering angle sensor and the calibration in the special function in the forscan
I have the same problem, you can solve it?
@elvisricardo1 yed
I've fitted New/ Second hand module. Followed your instructions :abs module initialization/relearn from Central configuration but my service procedure is not supported. Any clue why not??
Check the part number
Check the part number
@@ADDAUTOMOBILESERVICES
Yes I did. I had to take the module out to check
@markwalton8644 did it match
@@ADDAUTOMOBILESERVICES
Yes.
I originally bought an ABS module for 2010 model but was wrong. I realised this when I took it out so ordered the right one. Unfortunately I can't say for sure whether the New/ second hand is OK, so maybe I might have to order another one. The Problem is to buy complete newfrom Ford it is £2k😂
Thank you SO MUCH for this video! Can i ask a dumb question...in forscan it will get the original abs module data directly from ford? I dont need to plug my old unit back into the truck to get the abs mod info?
Yes it will pull the factory data from Ford server with the vin unto the used ABS module
@@ADDAUTOMOBILESERVICES I have a 2011 f350 6.7 is there a way to check to see if they have the "as made" data for my truck before I start the process? Sorry for all the questions. Thanks for all your help!
@@ADDAUTOMOBILESERVICES just wanted to let you know it worked for my 2011 f350! I can't tell you how happy I am. I would've had to wait 2wks for the ford dealership to get me in not to mention whatever the shop bill would've been. I owe you one man! THANK YOU!
You're welcome
They have
Which VCI did you use?
Maxijvci
Great info boss
Thanks boss
Hi great video. Would this be possible on a 2015 fiesta. I want to replace the faulty abs unit for a second hand one off eBay with the same part number. I have forscan on my laptop already.
Yes it will work
Hi thanks for the advice, the as built file did not contain the abs information but I did the reset and relearn central configuration and it works. I need to replace the IPC on this 2015 fiesta as well, I have the as built info from the current one but I am not sure if the IPC is on the pats security, I don't think it is but any advice would be good.
@@richmc8209 it is not part of it
be warned if the imobiliser runs through the abs module you can configure the module but the vehicle will not start unless you match the module to the pats system
Yes
How do I do this to a ford transit 2016 I don’t have the old abs module only a used one the van won’t start
Scan all systems to know the problem