Thank you so much for sharing! Please do more similar projects with LEDs for vehicles. I've seen some speak of a delay before the signal outputs to the light. Do you think that a relay might help the situation, or possibly it could make it worse? It's just that you're taking the turn signal wires and brake wire and increasing their loads, and I know in the car audio world when we increase the load on the accessory wire that it's good practice to run it through a relay, so I'm thinking maybe the same could be true for the signal wires for lighting.
Hey. Thank you so much. Please visit my playlists to see more related videos. And I’ll make more for sure. BTW, I think the delay is due to Arduino processing speed or so. Not related to wiring.
Hi. follow the steps in your video. I made connections to arduino nanoma. When I power up it turns white. Then, when I give +12 v input, unfortunately the inputs of the arduino nano no longer work. I think it burned.
This is awesome, thank you - going to check out your other videos. Question - you'd need the 12v power from the car to be constant, not based on ignition - since the lights need to come on regardless of the car's ignition status - so wouldn't powering this Arduino when the car is off slowly drain the battery?
Hey, thank you so much. When the LEDs are not active Arduino Nano drains around 70mA at 5V max. So when it translated into 12V, it is around 30mA. So if the car battery is 40Ah 12V battery, it takes 1333 hours to fully deplete. It is 55 days. So I think this is negligible. And I have made a product which powers up the unit with the car light signal itself. So no need for a constant 12V supply. will release the videos on that soon.
Hi i love this setup and i have followed what you have done. I am wondering if you could change a bit of the coding to allow for the reverse lights to work along with the dim and brake. So the reverse lights would only be the same amount of LED'S as the indicators. Outside 15 LED'S reverse. middle LED'S dim and brake, Outside LED'S other end reverse. I hope that makes sense
Hey. Yeah the request is very clear. However it requires bit of code editing and will try to include it in the next revision. In the meantime please take a look at my playlists. You will find more options there.
This may help you DIY Audi Q7 Style Modern LED Car/Truck Tail Light With Dynamic Indicators | Arduino + WS2812B LED th-cam.com/video/Zr67DR7rTLo/w-d-xo.html
@@HAZITECH Is it also possible to make the blinkerspeed faster? I am at 0 for blinker speed and it is not fast enough. Also, is it possible to make the delay between inputs faster?
Can you help me ? I have a problem not with your tutorial that helped me alot but with the way im going to use it. I need a matrix of LED ( i've seen you tutorial on bike matrix ) the problem is that my matrix of led is not EQUAL. first row is 20 led Second is 10 Third can be 8 Etc... How can I setup this please ?
Hey thanks. Go to blinker function sections down below in the code. Then turn on the required section in orange, put a delay, turn off the section and again put a delay.
Hello. I need help with your project. I installed everything as you have in the video in the house on the source it works fine. But as soon as I plug it in the car it starts going crazy. What could be wrong? I would also send a video of what it only works here, it can't be done on youtube. Thank you for your response.
Hi help please, i have connected this to my car but it is 14v when the engine is on - what should i do its causing problem with the LEDS everything was ok when i connected it using 12v but it changed once i connected it to the car thank you in advance
Hello. i've made the connections, but it's not working. I made a 12 to 5 v converter. I connected it to a 5 volt arduino, connected the gnd pin with resistors. then I connected the 12 v+ pole to the 22k resistor, but only the white light is on. soory google translate. and I made num leds 30. I made BlinkerLEDs 10.
That is very strange. If you did the wiring correct and upload the code as I mentioned, it should work. There are hundreds of members tried this and worked.
@@HAZITECH I have, 3 questions I only have 1 led turning on what does it mean and do have to connect all connections to work and do they go on negative line or positive line are do I have to make 2 wires for turn signal and break
You have to connect all the resistors based on the wiring diagram to make it work. For bench testing, just give +12V to signal wires one after the other and see what happens.
Oyata oona gaanak puluwan. Mama 144 try kala. Ekama de pixel wedi weddi power drop wena nisa strip eke depeththenma 5V power denna. Ampere gaana bulb wedi wena gaana balala denna. Bulb 1000 unath danna puluwan.
There is a slight 1-2sec delay when the brake is hit while the signal indicators are running. Other than that there is 0 delay. In the video most of the time I hold the brake to demonstrate.
@@HAZITECH Thanks for your reply. I changed nothing in your code except for number of LED's. No matter what input I end there is a 4 second delay before whatever input you trigger turns off. So upon power up the tail light portion is on. If I input for the brake light it turns on immediately. When I end the brake input the brake light doesn't turn off for 4 seconds. The same thing happens if I input for the reverse light and either of the turn signals.
Wow that’s very strange. Try giving 5V to the 10 K and 22K resistor joint to trigger the lights for each channel to see the effect is same. You can get the 5V out from the Arduino board.
But you should use 10K resistor. Ooh that maybe the reason. Forget 22K but connect 10K as in the diagram. And then give 5V to 10K (arduino data in connection side). It should work fine. Let me know after testing.
Not at all. As long as you give 5V, higher amp rating won’t hurt. It is actually better. LEDs will draw only the required current from the power source.
По вопросам приобретения обращайтесь к нам по электронной почте info.hazitech@gmail.com или через WhatsApp по телефону +94779299171. Ознакомьтесь с отзывами наших клиентов на нашей странице в Facebook, перейдя по ссылке ниже. Мы ценим ваш интерес и благодарим вас за внимание к нашим услугам! facebook.com/HAZI.TECH/reviews
@@HAZITECH thank you for replying back. I am planning to start led taillight and led headlight repairing shop but I am not able to find the smd led chips used in car headlight and taillight. So is there anyway you can help
Find more vehicle LED Light Systems here
th-cam.com/play/PL4dsTE_604gsyR__ym22681pabDq9zSTR.html
Pure technology and programming
Thank you so much.
its very helpful content. thank you so much
You are welcome.
Thank you so much for sharing! Please do more similar projects with LEDs for vehicles.
I've seen some speak of a delay before the signal outputs to the light. Do you think that a relay might help the situation, or possibly it could make it worse? It's just that you're taking the turn signal wires and brake wire and increasing their loads, and I know in the car audio world when we increase the load on the accessory wire that it's good practice to run it through a relay, so I'm thinking maybe the same could be true for the signal wires for lighting.
Hey. Thank you so much. Please visit my playlists to see more related videos. And I’ll make more for sure. BTW, I think the delay is due to Arduino processing speed or so. Not related to wiring.
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
Awesome project. But can i do witn one esp8266?
Thank you so much
Thanks a lot. More videos are in the playlists. Yes you can do that.
Hi. follow the steps in your video. I made connections to arduino nanoma. When I power up it turns white. Then, when I give +12 v input, unfortunately the inputs of the arduino nano no longer work. I think it burned.
If you did the wiring exactly as I mentioned, it should work just fine. More than 500 people already made this.
Have you installed it on a car? does the break with turn signal work the same way when it is connected to the actual turn signal of a car?
Yes. There is a slight delay but it works as shown in the video. Make sure you adjust the turn signal timing as shown in the video.
hi you can make this to brake light blinker? and ad 1 sinal to rainbow demostrantion and anoder to police lih]ghts????
I’ll combine all of my viewers ideas and release the next version of this soon. Stay tuned.
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
This is awesome, thank you - going to check out your other videos. Question - you'd need the 12v power from the car to be constant, not based on ignition - since the lights need to come on regardless of the car's ignition status - so wouldn't powering this Arduino when the car is off slowly drain the battery?
Hey, thank you so much. When the LEDs are not active Arduino Nano drains around 70mA at 5V max. So when it translated into 12V, it is around 30mA. So if the car battery is 40Ah 12V battery, it takes 1333 hours to fully deplete. It is 55 days. So I think this is negligible. And I have made a product which powers up the unit with the car light signal itself. So no need for a constant 12V supply. will release the videos on that soon.
This deserve millions subscribers ! 👍👍👍👍👍👍👍😍😍😍
Wow, thank you so much. Please share my videos to grow our community. Thanks 🙏🏻.
Hi i love this setup and i have followed what you have done. I am wondering if you could change a bit of the coding to allow for the reverse lights to work along with the dim and brake. So the reverse lights would only be the same amount of LED'S as the indicators. Outside 15 LED'S reverse. middle LED'S dim and brake, Outside LED'S other end reverse. I hope that makes sense
Hey. Yeah the request is very clear. However it requires bit of code editing and will try to include it in the next revision. In the meantime please take a look at my playlists. You will find more options there.
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
Hi nice work, how can i separate the indictor lights and the reverse lights onto different strips please
Hey, I’m working on it at the moment. I’ll post videos soon on that. Stay tuned.
@@HAZITECH Awesome, Thank you
You are welcome
Very nice tutorial. Could you show us how to split the LED strips to 4 parts? The stop lamps are split because 2 of them stuck on the trunk
This may help you
DIY Audi Q7 Style Modern LED Car/Truck Tail Light With Dynamic Indicators | Arduino + WS2812B LED
th-cam.com/video/Zr67DR7rTLo/w-d-xo.html
මෙක තමයි මම තියපු එක නියමයි bro,
Thanks bro
is it possible to program the reverse light so that it wont be interrupted by the brake input?
Yes can be done. I’ll keep it in my mind for the next version.
@@HAZITECH Is it also possible to make the blinkerspeed faster? I am at 0 for blinker speed and it is not fast enough.
Also, is it possible to make the delay between inputs faster?
hello, will the on/off switches start working? How would I connect them?
You can add switches to any of the signal wires. So that you on/off the 12v signals.
@@HAZITECH Thanks
Thanks a LOT.
Can you help me ? I have a problem not with your tutorial that helped me alot but with the way im going to use it.
I need a matrix of LED ( i've seen you tutorial on bike matrix ) the problem is that my matrix of led is not EQUAL.
first row is 20 led
Second is 10
Third can be 8
Etc...
How can I setup this please ?
I use the running 12v to power the whole system? But it wouldnt brake when the running is off?
Sorry. I'm not clear what you are saying.
Wow! Amazing
Hi I’m looking at the code, how do I change the sequential indicators to a solid blinker please?
Hey thanks. Go to blinker function sections down below in the code. Then turn on the required section in orange, put a delay, turn off the section and again put a delay.
Hello. I need help with your project. I installed everything as you have in the video in the house on the source it works fine. But as soon as I plug it in the car it starts going crazy. What could be wrong? I would also send a video of what it only works here, it can't be done on youtube. Thank you for your response.
It is 100% due to the power supply. Try using a high quality mobile phone USB charger and get the 5V out from it for the system.
nice video thanks. Do i fill the commands just like you did exept for the amount of LEDs
Change the code only if you want to change the number of LEDs. Otherwise upload the code as it is.
Sir 2 pcs vanum yappadi order pannanum 4:06
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171
Hello man how i conect ws2813 led to arduino uno ? Pls help me i have 60 cm ws2813 for my car project 😔
Sorry it doesn’t work with this.
Good and very useful idea grate video tx bro👍👍👍❤❤❤
Thanks a lot bro
мое авто сломалось, стоп сигнал и поворотники перестали работать, ваше искусство спасет жизни, спасибо
Вау, невероятно. большое спасибо. но будьте осторожны с законом вашего графства.
İf ı can try arduino uno is this still work
Yes of course.
This is nice project,👍👍
how if I want drive only R or L..?
one led strip for R or L, so the led can start from the one side, not from center
I'll do that as my next project next week.
@@HAZITECH wow... okay brother, thank a lot 😍👍
You are welcome
But in return I want something from you 😉. Please share and promote my TH-cam channel. That’s it 🤜🏻.
@@HAZITECH yep already 😉
Hi help please, i have connected this to my car but it is 14v when the engine is on - what should i do its causing problem with the LEDS everything was ok when i connected it using 12v but it changed once i connected it to the car thank you in advance
For power in you should use a very good 5V power regulator. For the signal lines, you can increase the 22K resistors to ~25K.
@@HAZITECH thank you i'll try this and will update you
Perfect. Good luck
Can you do this without the buck converter
You have to have a 12V to 5V voltage converter which can output around 2-3A
i am sorry Master,i want to ask, is it possible if you use arduino nano, if you can please send the schematic
I have used Arduino nano here. The schematic is in the video.
Sir 2pcs vanum order yappadi pannanum
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171
Sir led only power on off animation how work
Please take a look at my next video on this.
Is the LED strip you used 12v? I have 12v led, how can I power 12v led when Arduino is 5v max?
If you take a look at the wiring diagram in the video, you can see I have used a voltage regulator.
@HAZI TECH I see your diagram, but you are using 5v led correct? How can I use 12v led?
FastLED.h: No such file or derectory
Got this error, any ideas?
Install the FastLED library first
Hello. i've made the connections, but it's not working. I made a 12 to 5 v converter. I connected it to a 5 volt arduino, connected the gnd pin with resistors. then I connected the 12 v+ pole to the 22k resistor, but only the white light is on. soory google translate. and I made num leds 30. I made BlinkerLEDs 10.
That is very strange. If you did the wiring correct and upload the code as I mentioned, it should work. There are hundreds of members tried this and worked.
The Hazard lights don't work when reverse light is on.. You can't backup with hazards on
Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
💛💛💛 next projects test ❤
👍🏻
I'm running this project the arduino is turning on but not the leds I'm using the ws2812b
Please double check the wiring and the LED data in direction.
@@HAZITECH I have, 3 questions I only have 1 led turning on what does it mean and do have to connect all connections to work and do they go on negative line or positive line are do I have to make 2 wires for turn signal and break
You have to connect all the resistors based on the wiring diagram to make it work. For bench testing, just give +12V to signal wires one after the other and see what happens.
@@HAZITECH I'll up date u ty
Cool 👍🏻
මේකට මම පොඩි යොජනවක් කරන්නද??? Day time running light එකක් විදියට ඕක power එක තියෙනව හැම වෙලෙම light on වෙලා තිබ්බොත් බල්බ් වල life time එක ඉවර වෙයිනෙ... ඒක නිසා ඕක power ඔන් උනාම මුකුත් light පත්තු නොවී තියෙන්නත්.. signal සහ break වලට විතරක් දැල් වෙන්න විතරක් හදන්න බැරිද... රෑට light ඔන් කලාම parking line එකෙන් wire එකක් අරන් රෑට ලයිට් දැම්මම විතරක් dim red colour light එක දැල්වෙන්න හදන්න බැරිද... මේක අදහසක් විතරයි...
Godak honda adahasak. Thanks a lot mata adahas denawata 🙏🏻. Aniwaryayenma karannam. E version eka langadima dennam. Jaya wewa brother.
හොද අදහසක්
Aniwaryayenma. Oyagollonge adahas mata kiyana eka godak watinawa. Thanks a lot. Api ekathu wela honda dewal issrahata karamu 🤜🏻
අනිවාර්යයෙන්... මම සෑහෙන කැමති channel එකක් මේක....😍😍😍😍😍
@@HAZITECH code එක කියන්න මම වෙනස් කරන්නම් bro
Sir, meakata uparima pixel led keeyak set karana puluwanda?
Oyata oona gaanak puluwan. Mama 144 try kala. Ekama de pixel wedi weddi power drop wena nisa strip eke depeththenma 5V power denna. Ampere gaana bulb wedi wena gaana balala denna. Bulb 1000 unath danna puluwan.
@@HAZITECH Thank you👍
You are welcome 🙏🏻
@@HAZITECH meaka man hadala baluwa wadea hari giya 🔥Thank you👍
Nice
Hi, is it possible to order this from you?
Yes of course. Send me an email to info.hazitech@gmail.com or WhatsApp +94779299171
wow very nice tnx. im not finde arduino code ??? where is it ?
It is linked in the video description. Google drive link.
meke pothai CD ekai mta gennagnna puluwnda
Sorry mama CD, book sell kranne na
I want modern car tail light v1 software coding details
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
Thank you brother.
You are welcome brother
I want like this Light for Skoda Octavia old model 1.9 tdi.
Any links?
@@HAZITECH No
Ok. Try it out. It will work great on the model you mentioned.
@@HAZITECH It will come for All Cars??
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
Sir, how to make a knight rider lamp with arduino. Thanks.
Here you go. You can find many knight rider projects here.
th-cam.com/play/PL4dsTE_604gvwvnnnKTFg-bDIQMbbrZLh.html
@@HAZITECH awesome...
U save my day sir, i will share to my friends your channel in my whatsapp 🙏🇮🇩
Wow super thanks. Really appreciate it 🙏🏻
I can not find the software ?
😢
සුපිරි bro
❤️❤️❤️❤️❤️❤️❤️❤️
Thanks bro
very nice !!!!!
Thanks a lot
Why is there such a delay when you end any of the inputs? Like when you release the brake input the brake lights stay on for like 3 or 4 seconds.
There is a slight 1-2sec delay when the brake is hit while the signal indicators are running. Other than that there is 0 delay. In the video most of the time I hold the brake to demonstrate.
@@HAZITECH Thanks for your reply. I changed nothing in your code except for number of LED's. No matter what input I end there is a 4 second delay before whatever input you trigger turns off. So upon power up the tail light portion is on. If I input for the brake light it turns on immediately. When I end the brake input the brake light doesn't turn off for 4 seconds. The same thing happens if I input for the reverse light and either of the turn signals.
Wow that’s very strange. Try giving 5V to the 10 K and 22K resistor joint to trigger the lights for each channel to see the effect is same. You can get the 5V out from the Arduino board.
@@HAZITECH I am using the 5v out from the arduino board. I'm not using the voltage divider since I am bench testing.
But you should use 10K resistor. Ooh that maybe the reason. Forget 22K but connect 10K as in the diagram. And then give 5V to 10K (arduino data in connection side). It should work fine. Let me know after testing.
Hi Great project how easy would it be to run the power on animation twice in the code.
You can simply copy the code in the setup and male a separate pattern function and call it in the loop
@@HAZITECH Thanks for the tip. Repeated setup in setup and it worked great.
Awesome 👍🏻
It says 12v to 5v. But how many amp?
It depends on the number of LEDs you use. In general, 1.5-2A is enough for 100 LEDs.
@@HAZITECH my fear is that my step down from 12vto5v says 3amp. Will that burn my LEDs if I only have 30 or 40?
Not at all. As long as you give 5V, higher amp rating won’t hurt. It is actually better. LEDs will draw only the required current from the power source.
@@HAZITECH ok thank you. Been trying to figure this out lol
Cool. Good luck
Its it working with 24 amps ??
You mean 24V right?. If you use a 24V to 5V DC step down converter for power in and change all 22K resistors to 50K, you are good to go.
@@HAZITECH okayy , thanks for the explanation man , appreciate it 👍👍
Anytime Bagus 🤜🏻
Supiri
thank you
Thanks a lot brother
Bus වල pixel shel programming karana හැටියි ewa හයි කරන හැටි ගැන video එකක් කරන්නකෝ
Hari karannam brother. Podi kaalayak denna.
බොහොම ස්තූතිය 🙏
ඔයා කොහොමද pixel programming ගැන ඉගෙන ගත්තේ .....???
🙏🏻
Where i got the coding
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp +94779299171
Где купить. Эту ленту
По вопросам приобретения обращайтесь к нам по электронной почте info.hazitech@gmail.com или через WhatsApp по телефону +94779299171. Ознакомьтесь с отзывами наших клиентов на нашей странице в Facebook, перейдя по ссылке ниже. Мы ценим ваш интерес и благодарим вас за внимание к нашим услугам!
facebook.com/HAZI.TECH/reviews
Is anyone having a issue downloading the file I really like the start animation
Try downloading it with a PC not with the mobile phone
🥺♥️ supper
Thanks a lot
Well try to replace. Are you also on Facebook so I can install a video of what it does?
I’ll take a look. Did you try to upgrade the power supply?
I haven't had time to try to replace yet. I sent a video of what it does to me on Facebook.
Got it 👍🏻
can i find ino file ?
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171
මට මේක තනි strip එකක් නැතුව දෙපැත්තකට හදාගන්න ඕනි.උදවු කරන්න පුළුවන්ද bro?
Menna brother
th-cam.com/video/Zr67DR7rTLo/w-d-xo.html
Where the code link
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
Arduino code please.
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
Hi
Plase code
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
👍👍👍😍
Thanks 😊
Đẹp đấy ib cho nhết thử s nhé
Thử nó. Chúc may mắn
Contact number sir
May I know your question?
@@HAZITECH thank you for replying back.
I am planning to start led taillight and led headlight repairing shop but I am not able to find the smd led chips used in car headlight and taillight. So is there anyway you can help
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
Sir 2 pcs vanum yappadi order pannanum
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171