hello, I discovered your channel a short time ago, and your creations interest me but I don't know LEDs like the WS2812B and I have questions. do you know how many LEDs Arduino is able to drive? can we connect several strips of LEDs in parallel on the same pin of the Arduino ? because in my project I have to drive 480 LEDs but as the colors are repeated, if I can connect several strips of LEDs, the Arduino will just have to drive 240 LEDs. thank you for your work. Good luck👍
Hey, I love your videos. Can I make this kind of system with RGBW strips (SK6812) or it must be WS2812B? I want RGBW strip because I could make true white for reverse and drl’s.
You are the best on you tube when it comes to neopixel projects.. I love your work keep it up.. Is there any chance of making the brake light strobe 3 times them stay on? also animate the reverse light so it comes on like the tall light?
Great stuff once again. I have built these and installed them on the rear. Any news on the front version? Or how can I change them to white for the front and just not connect the bits I don't need.?
Since you are powering the system with the car power, there is no additional negative required. Just tap the wired to your car back lights and use with this. If you want to buy the new controller, send an email to info.hazitech@gmail.com
Hey your tutorial is amazing ❤ I just wanna know. Can we use arduino for addressable tail lights with also using of sequential tail light function in same device (arduino)? . Basically I am looking for the tutorial in which someone explains the sequential function with show mode in tail lights using arduino
Hi yes. It can be done. Reach out to us at info.hazitech@gmail.com or via WhatsApp at +94779299171 for any personalised services or custom job requests.
Hey, my website is still WIP. You can directly contact me via email or WhatsApp. That’s how everyone does. Send me an email to info.hazitech@gmail.com or WhatsApp +94779299171
Okay very good In the future i want my own buikd taillight and headlight With that audi style welcome light show and after that Drl front and back Also keep the park light function And turnsignal dynamic And when uses turnsig. The drl on that side need to be dimming Also want to build a crazy bright 3e brakelight with in corperated also turnsignal (alternate with the one in taillight both dynamic) And when brakes are not aplied than 5 sections of light turn on ( truck toplight idea) At front want the drl also welcome show light and dimming when use turnsignal All drl's must dim atliest 40% when using turnsignals and when driving lights are turned on So its a lot but i thinks this should be posible with you're equipment
Yeah need to think but doable. Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
Good morning, your projects are great, there will be a way to give it a start sequence like Chinese strips, turn on from one side to the other and fill the strip by points and then turn on everything, this for thail lights
Hi brother, thanks. just trying to understand some values, what is Parkdetect, startupspeed, mode, pres? my park lights are always on, so can i bypass park light connection by changing these values?
Usually the light is powered by the ACC power line. That means power comes to the system with one key click. So no battery drain when vehicle is turned off. And the standby power drain is around 10mA. Which is negligible considering the vehicle battery capacity.
Thank You ;-) You are my Arduino Master !!! Now i think only change color and will be like DRL ? For front lights ... Awesome Job !!! Thanks again .... Best Regards ;-)
Hi finally i handle with this code and have drl signal turns police strobo and knight rider ;-) Thank You Hazi 🍾👋 and now i learned some arduino rules 🤭😁
@HAZI TECH Hello. great project. after uploading the codes to my arduino. I'm giving +12 volts on pin 9. sometimes the flash effect and sometimes the red lights are flashing. What can be the problem.
It can be done. Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
i must be missing something because i worte out the code exactly as you showed it in the video and i can't get my sketch past the verification because it says so many things are left undefined.
@eross21 it basically divides the input 12V voltage signals into two parts and feed only ~5V to arduino pins as 5V is the maximum the Arduino input pins can handle. So it is like 12V to 5V voltage converter. And also the resistors make sure that Arduino won’t pickup noice when there are no inputs given by grounding the pins.
hello kind of new to arduino the voltage devider 10k 22k will make 10 volt signal will that not burn the input bcause hen can is runing its 14.7 something Q_Q help
Молодец 👍👍👍круто, можете сделать зад и перед дневные ходовые огни на одной ардуино с полицейскими стробоскоп ом но с подключением ленты перед один сигнал зад другой сигнал и кнопка на включение стробоскопа.
Find more vehicle LED Light Systems here
th-cam.com/play/PL4dsTE_604gsyR__ym22681pabDq9zSTR.html
Эти проекты я уже смотрел класс👍👍👍
hello,
I discovered your channel a short time ago, and your creations interest me but I don't know LEDs like the WS2812B and I have questions.
do you know how many LEDs Arduino is able to drive?
can we connect several strips of LEDs in parallel on the same pin of the Arduino ?
because in my project I have to drive 480 LEDs but as the colors are repeated, if I can connect several strips of LEDs, the Arduino will just have to drive 240 LEDs.
thank you for your work.
Good luck👍
Hey, I love your videos. Can I make this kind of system with RGBW strips (SK6812) or it must be WS2812B?
I want RGBW strip because I could make true white for reverse and drl’s.
Last Time Your Projects Police Strobo, I Use WS2812B 8Led To 16Led Verry Very Good👍👍👍
Super. Thanks a lot 👍🏻
You are the best on you tube when it comes to neopixel projects.. I love your work keep it up..
Is there any chance of making the brake light strobe 3 times them stay on? also animate the reverse light so it comes on like the tall light?
Hey thank you so much. I’m honoured. Yes it is doable. I’ll add it to my next revision soon.
Could you use a esp32 and have WiFi / Bluetooth to change the affects and for testing and stuff might be good trying to do something similar
Yeah. I’ll try to do that 👍🏻
Great stuff once again.
I have built these and installed them on the rear.
Any news on the front version?
Or how can I change them to white for the front and just not connect the bits I don't need.?
Thanks a lot. There are few front versions available in my channel. Please check the playlists.
Thank you so much very nice project.how to make auto colour change in knight rider ?
It is not doable in this code. I’ll add it to my next version.
Another great project. What do I have to do change to make them white for the front please
Hi all the colours are given in CRGB(Red, Green, Blue) format. So change values to CRGB(255,255,255)
Where do I connect all the car negatives?
Amazing tutorial btw!
Since you are powering the system with the car power, there is no additional negative required. Just tap the wired to your car back lights and use with this. If you want to buy the new controller, send an email to info.hazitech@gmail.com
Hey your tutorial is amazing ❤
I just wanna know. Can we use arduino for addressable tail lights with also using of sequential tail light function in same device (arduino)? . Basically I am looking for the tutorial in which someone explains the sequential function with show mode in tail lights using arduino
Hi yes. It can be done. Reach out to us at info.hazitech@gmail.com or via WhatsApp at +94779299171 for any personalised services or custom job requests.
Hey, Hazi do you have a website where i can request custom lights from you if not its cool i appreciate the knowledge and will start on my project
Hey, my website is still WIP. You can directly contact me via email or WhatsApp. That’s how everyone does. Send me an email to info.hazitech@gmail.com or WhatsApp +94779299171
Sir,Auto rikswa kelia front glash ke uper laganahe ,ek video banao please.
ज़रूर जल्द ही करूँगा
This is amazing! How many amps should have the power supply for this project?
Since there is very limited time we light up the full strip in white, for 144LEDs 3-4A is more than enough. Try to find a good quality power supply.
nice project!! but is there a different type of blinking the signal?
Thanks. Not yet. It will be available in the next version.
hello a question ...
is it posible to have the turn signal also in red collor
Yes possible. Just update the CRGB(xxx,xxx,xxx) values to CRGB(255,0,0) in the code
Okay very good
In the future i want my own buikd taillight and headlight
With that audi style welcome light show and after that
Drl front and back
Also keep the park light function
And turnsignal dynamic
And when uses turnsig. The drl on that side need to be dimming
Also want to build a crazy bright 3e brakelight with in corperated also turnsignal (alternate with the one in taillight both dynamic)
And when brakes are not aplied than 5 sections of light turn on ( truck toplight idea)
At front want the drl also welcome show light and dimming when use turnsignal
All drl's must dim atliest 40% when using turnsignals and when driving lights are turned on
So its a lot but i thinks this should be posible with you're equipment
Yeah need to think but doable. Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
Hello congratulations ! Is possible make this projet but using a ATtyni85 programed? From Argentina ! I suscribe now! Bye!
This specific program is too large for ATtiny85. You could go to my ATtiny85 playlist and see the available options.
@@HAZITECH Thanks friend. Really excellent projets . Congratulation. Good luck !
Thanks a lot 👍🏻
Hello its possible Turner on. When speaker outsider model 3 tesla active for song close dors. Tanks for you réponse. And where to bye it?😉😇😇
Hope we already contacted 👌🏻
Good morning, your projects are great, there will be a way to give it a start sequence like Chinese strips, turn on from one side to the other and fill the strip by points and then turn on everything, this for thail lights
I'll try to do that. Thanks!.
Hi brother, thanks. just trying to understand some values, what is Parkdetect, startupspeed, mode, pres? my park lights are always on, so can i bypass park light connection by changing these values?
Unfortunately those are not that straight forward. Sorry.
Thank sir you doing great job👍please make it with esp8266/wemos d1 mini for next project🙏
Will try 👍🏻
This will drain the car battery if the car is not being used as the circuits will stay on.
Does the code allow for arduino to "sleep"
Usually the light is powered by the ACC power line. That means power comes to the system with one key click. So no battery drain when vehicle is turned off. And the standby power drain is around 10mA. Which is negligible considering the vehicle battery capacity.
Hello Hazi Tech, Wow really once again a great project 👍👍👍
Can U make the new Running KnightRider Strobo Automatic Can Chaged Many Color addition ? 🤔
Yes it is possible. I’ll add it to the next version soon.
Thank You ;-) You are my Arduino Master !!! Now i think only change color and will be like DRL ? For front lights ... Awesome Job !!! Thanks again .... Best Regards ;-)
The front light video will be released soon. Stay tuned.
Hi finally i handle with this code and have drl signal turns police strobo and knight rider ;-) Thank You Hazi 🍾👋 and now i learned some arduino rules 🤭😁
Wow I'm so glad to hear that
thats awesome! ! i ve ordered all the components and i ll try to attach it on my old fiat brava..it should be fun xD
Awesome. Let me know how it goes.
LOVE THIS! any way to make this works with sk6812 rgbw?
I’m afraid I have no idea as I haven’t used SK6812.
@@HAZITECH not a problem, ill give it a try when i get my nano v3 in!
👍🏻
Hey Hasitha, this could look cool on RC Cybertruck + diffuser .. maybe in part 3???
Ha haa. Good point. Let’s see what I can do.
you never disappoint mate..
Thanks a lot bro 🤜🏻
@HAZI TECH Hello. great project. after uploading the codes to my arduino. I'm giving +12 volts on pin 9. sometimes the flash effect and sometimes the red lights are flashing. What can be the problem.
Have you checked that all the resistors are good?.
Hi is the arduino capable to control multiple light such as brake, park, signals or every section needs 1 arduino?
It can be done. Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
Wau really once again a great project 👍👍👍
Could you possibly make the new KnightRider in addition ? 🤔
Hey Matze. I’ll add more modes in my next revision.
@@HAZITECH ok super 👍🏼
You are welcome
i must be missing something because i worte out the code exactly as you showed it in the video and i can't get my sketch past the verification because it says so many things are left undefined.
Free content no longer available. For code purchase with upgraded controller, contact us at info.hazitech@gmail.com
Nice superb. Can you please make bus route destination board using ws2812b led
Thanks a lot. I’ll try. Sorry it is taking too long.
@@HAZITECH ok welcome
👍🏻
Harsha brother , grate job......🎆
Thanks a lot 😊
This is a very professiinal video . Tha k you
Thanks a lot 😊
Outstanding love the knight rider 👏
Thanks a lot 👍🏻
@@HAZITECH Its actually work and easily to programming for newer like me 💜💜💜💜 u are my hero 🙌 ❤
Wow thank you so much. Really appreciate your support. Please LIKE and SUBSCRIBE to grow the channel.
how do i keep the knightrider on all the time and only go off when i indicate
Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
Led strip ganna koheda thiyenna meha
Mehe 144LED/m eka nam hoyaganna amarui. 60LED/m nam thiyanawa.
Online Electronic Stores Sri Lanka
tronic.lk
digitalelectronics.lk
www.menstore.lk
duino.lk
scionelectronics.com
senith.lk
wire.lk
techshop.lk
Hi ;-) please add Version with DRL ..Thank You ;-) I try modify this but i have some problems ;-( ...
Will do that 👍🏻
It is very nice for additional function, great!!
Thanks a lot 😊
@@HAZITECH can you change WS2812 to RGB 1W LEd? It will be more sight
1W pixel LEDs? Or regular?
@@HAZITECHI mean SMD LED 1W
You have to use pixel LEDs to make this work
How can I purchase the code
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171
Hello ;-) can you add new project with drl please Best Regards 😁
Will do soon
Hello. Nice project , is there location to download the code ?
Yeah. As always, full code is linked in the video description (google drive link)
Can you please give it to me @@HAZITECH
how to connect the arduino in the car so that the indicator lights work when the car is off (hazard lights)
Then you have to power the system with direct battery power not ACC.
@@HAZITECH won't the arduino drain the battery with this connection?
At standby mode (when there is no LED bulbs lit) it drains a very low current around 20mA which is significantly low for the car battery.
Bagus ni...minta izin nk cuba boleh?
In English please
Why my LED after power on always stuck in the middle ?
Can you help me sir 🙏🥲
Please check the 5V power supply. Try a different power supply.
@@HAZITECH thanks You very much sir 😁
Now my LED not stuck again 🙏😁
If you use esp8266, what do you have to change?
Yu can use the code as it is.
Can you please send the arduino codes and diagram?
Free content no longer available. For code purchase with upgraded controller, contact us at info.hazitech@gmail.com
Helo, can i somehow adopt the code to use it with WS2801 ?
It will work with a code line change.
what do the resistors do in this circuit?
Voltage dividing and noice filtering.
@@HAZITECH cool what does voltage dividing accomplish? just curious i’m trying to learn arduino and circuits
@eross21 it basically divides the input 12V voltage signals into two parts and feed only ~5V to arduino pins as 5V is the maximum the Arduino input pins can handle. So it is like 12V to 5V voltage converter. And also the resistors make sure that Arduino won’t pickup noice when there are no inputs given by grounding the pins.
Nice work brother 😍😍😍
Thanks brother 😀
create an 8x62 LED matrix project for cars with tex bluetooth+brake signal thank you..
Actually working on it. Let’s see.
ok tank's
hello kind of new to arduino the voltage devider 10k 22k will make 10 volt signal will that not burn the input bcause hen can is runing its 14.7 something Q_Q help
No worries. It is safe even for 15V
@@HAZITECH thx u for ur reply ur awesome :D i tested it and it WORK ! ur the best
Yeah. Awesome 👏🏻
Very very good 👍👍👍
Super Thanks
Bro I got error like led was not declare in this scope. How can I fix this
Install FastLED library brother.th-cam.com/video/-oPCpF1Unk4/w-d-xo.html
Thank you
You are welcome
Молодец 👍👍👍круто, можете сделать зад и перед дневные ходовые огни на одной ардуино с полицейскими стробоскоп ом но с подключением ленты перед один сигнал зад другой сигнал и кнопка на включение стробоскопа.
Спасибо!. Постараюсь добавить в следующую версию.
@@HAZITECH спасибо, очень буду ждать 👍👍👍 хочу использовать ваш проект в постройки нового электровелосипеда.
GREAT!!! 👍👍👍👍👍
Thanks 😊
Superb bro!
Thanks a lot
how can i get the code?
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171
Super bro….
Thanks bro 🤜🏻
Would you or anyone here know how to install this for blinker with just knight rider theme working?
So basically you want only the knight rider pattern along with the tail light functionality?.
@@HAZITECH yes and I've tried the arduino site ones nothing works really. But easier to send my lights to have it done
Thank you sir.....
💕💕💕💕💕💕
You are welcome
where is code sketch
Free content no longer available. For code purchase with upgraded controller, contact us at info.hazitech@gmail.com
Super, i like it
Thanks a lot 😊
Nice&Cool!.. 👍
Thanks a lot
වැඩ්ඩෙක් තමයි
ස්තුතියි සහෝදරයා 🤜🏻
I NEED PART 3 OF RC TESLA CYBERTRUCK
🙏
Soon brother.
I want to make it
Perfect. Try it. You won’t be disappointed.
Can use this bike
Yes you can
Thanks bro
You are welcome brother
Waaw 🥺♥️
Thanks 😊
Super මචං
Thanks a lot brother
Nice
Thanks 😊
I want this sir
Your contact no. Plz
Hi sorry I’m not selling. You can make it on your own.
wow
Thanks 😊
Meke code eka denna puluwanda
Code eka purchase karanna puluwan.
My friend I need help with a project. How can we be in contact? Email? Thanks
You can mention the concern here.
Please share code
You can contact me via info.hazitech@gmail.com to buy the code
How many rupees?
boss code need
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
Still waiting new project 👍👍👍😁
Cool 👍🏻
Helo hazi
Hey Tony
@@HAZITECH ti chiedo di fare le luci di direzione dinamiche,del video che ti mandai grazie sei bravissimo
STINGY
I was giving away all for free over last 3 years. Cannot do that forever.
Hi, can't find the download Modern_Car_Tail_Light.ino can you supply a link for this
Sorry, found it now
Great 👍🏻