I already build the circuits to reduce the 5 12v Inputs down to Logic with Octocouplers. Works great. Gonna be issues with voltage dividers. only need 1 AMS1117-5 and 5 octocouplers and few resistors. But yes I love your code, and the Audi really does have a very smooth progressive LED sequence. And your motion Matches that very nicely. Infact im going to use that code with some addressables..
@@HAZITECH hi bro Hazitha, I want ask to you please 🙏, I already Install the led In the tail light, but my wiring is different from you. my first led start from the other side, how if I want reverse the starting of the LED *Void ParkON* your coding start from inside to outside I want start from outside to inside and in this *void ParkOFF* also 🙏🙏🙏 thank a lot for the response 😘😘
Good morning, your projects are great, there will be a way to give it a start sequence like Chinese strips, turn on from one side to the other and fill the strip by points and then turn on everything, this for thail lights
Hi friend, Your channel deserves more view, I have not yet found a more detailed explanation than in your videos. Is there an error on the screen car or the resistors are doing the job? Thank you
@@HAZITECH Your welcome it's the minimum for the quality of your work. Thanks for the answer. So it's possible that with this connection I have an error light on the dashboard and therefore I will need a supplement ?
Hello, thank you for telling me that you can finally use it. The question is, how should I change the program to change the total of 40 LEDs (WS2812B) to 60 in total?
Hi very nice! The LED 5V 144 strip is not working well, my car puts out 13.5v when it is on and 12v when it is off I have followed your instructions BUT Park light is 3v connect together with the brake lights 13.5v it's flickering the park light and brake light both use 1 wire causing flickering The indicators flashes with the park light when everything is on Everything works well when car is off but when the car is on the powers supply changes causing issues I've tried step down and step up converters but it's not working well Any advice please?
Excellent work mate, keep it up. one question thou - is it possible to have reverse light together with a turn signal? Just like turn signal and brake? If so, how to modify the code?
thanks for the video. I have a car with four round taillights. I want to use 2 led strips each. that would be 8 in total, 4 on each side. with 1 arduino would it be possible? each stripe would be on average 25 cm long. thanks!!!
Hi the indicator light is green-yellow, I'm using the WS2812 I've tried 3 different strips, how can I change the indicator colour to Amber-Orange please. Thank you for your amazing work
Thanks for the great video..But I think there is a bug in the code...if the tail light is on and you put in reveres the reverse lights dont work and tail lights go off can you please tell me how to fix this.. thanks
Hmm, that can’t be right. It should be a power issue. Reverse white light draw a large current and your power supply should be able to handle it. Try using a different power supply as many guys have already made this and sent videos to me. Good luck.
@@HAZITECH I think you may be right...Anyway is there a way to animate the reveres light to come on from the middle and spread out along the strip? also flash the brake light twice before staying on.. Thanks for your help Dave
How would this work if I wanted to run 2 or 3 led strips for more brightness? Also could I test this outside of the car? Would I just power it with 12v and use switches to give 12v to the brake/ turn signal/ reverse light pins?
Hi love your vids. Just found your youtube channel. I have a question about the signal input. Can i put only turn signal and use it as a turn signal without using all the other wires? Will it still work or thr arduino would not like it? Bcs i want to use different led strips for different things. One led strip for braking and other for turn signal and other strip for reverse. I thought using 3 arduinos and using 3 strips of led
@@HAZITECH how to change it? is there a benchmark? if I want to add 5 more LED strips, what do I need to change again? sorry if you ask a lot of questions, I am unfamiliar with this
You mean 5 LED strips in parallel?. If so nothing to change. Just give the data signal to all LED strips at once. Then they all will function the same. Make sure you use a proper voltage regulator to cater the LED current draw.
@@HAZITECH how about using a series circuit? Can it? because I want to make this project in the taillights of my car. thank you in advance for answering my question in detail🙏😀👍
Hey I would love to impliment this on 3 6x19 Array that will be used in 05-09 mustang Taillights.. I have this exact same thing I built but with octocouplers to seperate the vehicle 12v input signals Blinker, Reverse, Running Light. I am not good with the arduino IDE programming. Would it be easy to impliment blinker accross 3 arrays .. You seen mustang tail lights. even that smooth start up sequence is great. Cool thing this array is NZ addressable and you can have a Digital Pin for input for SHOW MODES also with this....
If I have two led strips for brake and parking light and I have two other strips aside for right directional and left directional that I would have to modify so that when I put the directional lights, only those that are directional lights and not the 2 that I use for parking light
Awesome 👌 👏 👍 Can you make it rainbow running lights when signals are not in use? And signals will just override the rainbow running lights? Please help thank you😊
Hey, thanks for this awesome idea! I'm trying to do this project using a Teensy LC, but the digital pins are not 5v tolerant. Do you know which resistors I can use to bring the voltage down to 3.3v? (for the digital pin inputs only)
could you make one of this but with two outputs so each side of the tail lights have their own data signal? also you could put together the front lights with drl and sequencial signal, a animated power on just like your other videos, but one data signal for each lights (4 digital outputs, front left, front right, rear left and rear right) this ways i think it's easier to build inside the lights, also i'd like to ask a show mode, for meetings, triggered by a button so it can show rainbow or police like flashing lights.... with a 4 channel output you wold have an ultimate code for any set of tail lights we build, in a easy way to build... and if we use differents channels we can build (internally of the lights) in a mirrored way, that's why would become a simplier way to build.... when we talk of led strips only, a sequence way it's simplier, but to put a strip in shape inside of the tail lights it's easier to do in a mirrored way...
This WOuld NEVER Be Legal In Europe. The Hazards Can be Same Lights As Turning Lights, But They Cant Be Turning Lights The Same As Braking Lights And Stuff.
I cant do it. I send message on facebook pls look at that..why is this led like that? I did not make the brake and signal connection. I just uploaded the code for testing. led started to work mixed. Please help me
@@HAZITECH i just connected the vin, gnd and signal cables for testing.. in this case it shouldn't work but my led works mixed.. i will try what you say
@@HAZITECH i want to make DIY like this but i want to add another sequence when im not using signal,brake,parking or hazard i want to put running rainbow lights or blinking lights if i will use signals, signals will override my running lights is it possible?
Why Do Car Manuafacturers Dont Use RGB LED? I DONT KNOW, They Don`t Eat The Power As Much, I Remember I Had A Lada And When I Turned On the Lights The Engine Started To Sound Difrently Because Of Tghe Load On Alternator, With LED Lights You DONT HAVE THAT ! Even If You Forget To Turn Them Off, They Will Not Drain your Battery As Normal Lioghtbulbs Does.
Find more vehicle LED Light Systems here
th-cam.com/play/PL4dsTE_604gsyR__ym22681pabDq9zSTR.html
I already build the circuits to reduce the 5 12v Inputs down to Logic with Octocouplers. Works great. Gonna be issues with voltage dividers. only need 1 AMS1117-5 and 5 octocouplers and few resistors. But yes I love your code, and the Audi really does have a very smooth progressive LED sequence. And your motion Matches that very nicely. Infact im going to use that code with some addressables..
Yes using octocouplers is the ideal and safest option. Glad you like mine. Please like and share my videos to grow my audience.
@@HAZITECH can u build code for matrix, that we can put in out pixel size?
It’s not easy. Let me see what I can do. I did one for bikes.
th-cam.com/video/GvFPiyIFESY/w-d-xo.html
@@HAZITECH yes but you cannot set the size of the panel. You can but in hex. Everything else uses a library
True. Let’s see what can be done.
BEST...!!!!!!
Thanks for my request bro 😍🥰
success for you 👍👍👍👍👍👍
Thanks a lot bro 🤜🏻
@@HAZITECHhi my Brother, can I know your email please 🙏
@@HAZITECH hi bro Hazitha, I want ask to you please 🙏,
I already Install the led In the tail light,
but my wiring is different from you.
my first led start from the other side,
how if I want reverse the starting of the LED
*Void ParkON*
your coding start from inside to outside
I want start from outside to inside
and in this *void ParkOFF* also 🙏🙏🙏
thank a lot for the response 😘😘
Hey. It’s info.hazitech@gmail.com
I’ll edit the code for you and email. Drop me an email.
very good and excellent your work continues like this you help me create my dreams thanks
Wow thanks a lot. Please share my videos and support to keep my energy level up 😉
Can you control or change color and effect signal led, stop led,... by smartAndroidPhone by using module bluetooth..? pleasee
Good idea. I'll see what I can do. Thanks!.
සුපිරි මචං , තව වැඩිදියුණු කරමු
ස්තුතියි සහෝදරයා 🙏🏻
Amazing project. Just one question. If i want used Led ws2813 not ws2812b. How connect for Arduino this strip?
Thanks a lot. Sorry WS2813 cannot be used.
සුපිරි වැඩක් ❤️
Thanks a lot
Your videos are awesome. Would your code work with addressable cathode style leds?
Thank you so much. May I have a part number of that LEDs.
Hi! Where do you get the code?
hi brother, you can make a separate exit with the arduino turn signal, stop, reverse. to different outputs of the arduino pin? please describe it.
Hey, I’m struggling with the limited time that I have. I’ll see what I can do 👍🏻
How bright are these during a sunny day?
Good enough. You can enhance it by using a diffuser.
Good morning, your projects are great, there will be a way to give it a start sequence like Chinese strips, turn on from one side to the other and fill the strip by points and then turn on everything, this for thail lights
I’ll try to do that
Good evening, there will be a way that you can make me a program, and I would like to know how to pay you, I am from Mexico
I have question sir..what if i want to make it front and rear light? Do i have to add the data pins or i have to use 2 arduino?
You can use a single arduino for both. But it is a whole new coding. I’m already having it in my to do list 😉.
@@HAZITECH thank you sir...i'll wait for it😊😊
You are welcome 👍🏻
Hi friend,
Your channel deserves more view, I have not yet found a more detailed explanation than in your videos.
Is there an error on the screen car or the resistors are doing the job?
Thank you
Wow thank you so much. Resistors are there to reduce the input 12V signal to 5V. As a support, please share my videos. Thanks 😊
@@HAZITECH Your welcome it's the minimum for the quality of your work.
Thanks for the answer.
So it's possible that with this connection I have an error light on the dashboard and therefore I will need a supplement ?
You can add switches to the connections to control the lights if needed.
Hello, thank you for telling me that you can finally use it.
The question is, how should I change the program to change the total of 40 LEDs (WS2812B) to 60 in total?
Great. As shown in the video, change the NUM_LEDS variable in the code to 60. That's it.
@@HAZITECH Thank you.
I will try it.
I'm looking forward to videos of various ideas in the future.
I would like an idea using ESP32 as a hope.
Cool. Thanks
Sir, this light project more beautiful if the red brake light can blinking first about 5 to 10 second than normal light 👍
How to made it, sir ? 🙏
I'll see about it
Superb... keep it up
Thanks a lot 😊
Hi very nice! The LED 5V 144 strip is not working well, my car puts out 13.5v when it is on and 12v when it is off I have followed your instructions BUT
Park light is 3v connect together with the brake lights 13.5v it's flickering the park light and brake light both use 1 wire causing flickering
The indicators flashes with the park light when everything is on
Everything works well when car is off but when the car is on the powers supply changes causing issues
I've tried step down and step up converters but it's not working well
Any advice please?
Any progress?
No luck yet do you know what I need to balance the current?
Excellent work mate, keep it up. one question thou - is it possible to have reverse light together with a turn signal? Just like turn signal and brake? If so, how to modify the code?
Yes it is doable. But it requires several code changes. I’ll make sure to include it in my next revision which would be releasing in a week or so.
And thanks 😊
thanks for the video. I have a car with four round taillights. I want to use 2 led strips each. that would be 8 in total, 4 on each side. with 1 arduino would it be possible? each stripe would be on average 25 cm long. thanks!!!
Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
Hi the indicator light is green-yellow, I'm using the WS2812 I've tried 3 different strips, how can I change the indicator colour to Amber-Orange please. Thank you for your amazing work
Hey, find the code lines with “(255,165,0)” and replace it with “(255,191,0)”. Try it and let me know.
Hi I changed the code but it didn't change the colour
Sorry that’s all I can do. You can change the values around and see. It’s (RED, GREEN, BLUE) values.
@@HAZITECH I changed it to 255, 22, 0 it's orange now, we're looking forward to your next project thank you 🙌
Wow awesome. Thanks for the update. Cheers 🥂
Thanks Ayya. Mama upload karannam
Ok malli 👌🏻
How to download Arduino code pls help😢
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
Thanks for the great video..But I think there is a bug in the code...if the tail light is on and you put in reveres the reverse lights dont work and tail lights go off
can you please tell me how to fix this.. thanks
Hmm, that can’t be right. It should be a power issue. Reverse white light draw a large current and your power supply should be able to handle it. Try using a different power supply as many guys have already made this and sent videos to me. Good luck.
@@HAZITECH I think you may be right...Anyway is there a way to animate the reveres light to come on from the middle and spread out along the strip? also flash the brake light twice before staying on..
Thanks for your help
Dave
Those updates can be done. But it require a bit of code change. I’ll add those to my next version.
@@HAZITECH Thank you so much for your help..Your channel dose some amazing things with noepixels
How would this work if I wanted to run 2 or 3 led strips for more brightness? Also could I test this outside of the car? Would I just power it with 12v and use switches to give 12v to the brake/ turn signal/ reverse light pins?
You can connect any no of LED strips in parallel. Yes your method of testing is correct.
@@HAZITECH Awesome, thank you for this!
You are welcome
Hi love your vids. Just found your youtube channel. I have a question about the signal input. Can i put only turn signal and use it as a turn signal without using all the other wires? Will it still work or thr arduino would not like it? Bcs i want to use different led strips for different things. One led strip for braking and other for turn signal and other strip for reverse. I thought using 3 arduinos and using 3 strips of led
Yes you can do so. Just make sure you use resistors as in the wiring diagram to ground the unused pins.
And you may find better suite options if you head towards my playlists
Hi Sir, I would like to request. can you show how to connect this setup to the switch please? I want to put this setup on my motorcycle. Thanks. ☺️
Hi, just connect switches between 12V and arduino signal in lines. That’s it.
how many led strips can you get??
You can change the number of LEDs as you want and update the NUM LEDS in the code as shown in the video.
@@HAZITECH how to change it? is there a benchmark? if I want to add 5 more LED strips, what do I need to change again?
sorry if you ask a lot of questions, I am unfamiliar with this
You mean 5 LED strips in parallel?. If so nothing to change. Just give the data signal to all LED strips at once. Then they all will function the same. Make sure you use a proper voltage regulator to cater the LED current draw.
Take a look at this project LED connections
th-cam.com/video/xoRwfLqMGLE/w-d-xo.html
@@HAZITECH how about using a series circuit? Can it? because I want to make this project in the taillights of my car.
thank you in advance for answering my question in detail🙏😀👍
Hey I would love to impliment this on 3 6x19 Array that will be used in 05-09 mustang Taillights.. I have this exact same thing I built but with octocouplers to seperate the vehicle 12v input signals Blinker, Reverse, Running Light. I am not good with the arduino IDE programming. Would it be easy to impliment blinker accross 3 arrays .. You seen mustang tail lights. even that smooth start up sequence is great. Cool thing this array is NZ addressable and you can have a Digital Pin for input for SHOW MODES also with this....
Awesome. I'll posting more videos on this. So stay tuned.
Thank you, I will try.
You are welcome
Is there a converter board to simplify the connection of the resistors to the signal wire? Thank you very much!
@@HAZITECH Can I use the PC817 4-Channel Isolated Opto Circuit Board to connect to the car signal wire?
Yes that would be a perfect replacement 👌🏻.
As long as gives out 5V high or low signal based on the 12V input you are good.
I want something similar for my scooter, like smoothest sequentials TS. Could you possibly create a video on this?
I’ll try
If I have two led strips for brake and parking light and I have two other strips aside for right directional and left directional that I would have to modify so that when I put the directional lights, only those that are directional lights and not the 2 that I use for parking light
Unfortunately that won't be a straight forward job. But you can change the LED strip length easily by changing the number of LEDs in the code.
Hello. This wiring is complex and difficult to make with a universal substrate. Can you create a PCB_Gerber file? Thank you in advance.
I have finished controllers for sale. Send me an email to info.hazitech@gmail.com or WhatsApp +94779299171
I'm late to reply, I studied the PCB_Gerber file on various sites and completed it. Thank you.
Awesome 👌🏻
hi! what wattage do i need for the resistor?
1/4 W is more than enough
i have 12v led strip and connected both gnd together,(converter for arduino) than its not working as shoul :S Is this circuit diagram correct??
You have to use 5V WS2812B pixel LED strips for this project.
@@HAZITECH all good now.
I'm using 12v converter for arduino than 12v for led, both ground is joined together. You have done a brilliant job. Thanks.
Awesome. So glad to hear that 😊. Thanks for letting me know.
Awesome 👌 👏 👍
Can you make it rainbow running lights when signals are not in use? And signals will just override the rainbow running lights? Please help thank you😊
Hello mate..
It's doable. I'll try to add it to my next revision.
Hey, thanks for this awesome idea! I'm trying to do this project using a Teensy LC, but the digital pins are not 5v tolerant. Do you know which resistors I can use to bring the voltage down to 3.3v? (for the digital pin inputs only)
Hi. Thanks a lot. Just replace all 22K resistors with 33K. That’s it 👍🏻.
@@HAZITECH thanks for the help! i really appreciate your responsiveness and i’m sure everyone else does too.
Thank you so much 😊. Please share my vides to gather more audience. Appreciate it.
How to adjust brightness of red colour? Park light
I’ll add that option into the code and let you know.
@@HAZITECH ok, i’m waiting, thanks
@@HAZITECH friend you remember me?
Yeah I do. Being busy with some other stuff. I’ll male it happen soon.
BTW, if you go to park light section, you will see something like (xxx,0,0). xxx corresponds to Red colour intensity. Make it a lower value.
could you make one of this but with two outputs so each side of the tail lights have their own data signal? also you could put together the front lights with drl and sequencial signal, a animated power on just like your other videos, but one data signal for each lights (4 digital outputs, front left, front right, rear left and rear right) this ways i think it's easier to build inside the lights, also i'd like to ask a show mode, for meetings, triggered by a button so it can show rainbow or police like flashing lights.... with a 4 channel output you wold have an ultimate code for any set of tail lights we build, in a easy way to build...
and if we use differents channels we can build (internally of the lights) in a mirrored way, that's why would become a simplier way to build.... when we talk of led strips only, a sequence way it's simplier, but to put a strip in shape inside of the tail lights it's easier to do in a mirrored way...
I'll see what I can d about it.
Osam...
Thanks 😊
Excellent...
Thanks a lot 😊
can u share a code? just for my task from college, not commercial
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
This WOuld NEVER Be Legal In Europe. The Hazards Can be Same Lights As Turning Lights, But They Cant Be Turning Lights The Same As Braking Lights And Stuff.
Make sense. Thanks for highlighting.
I cant do it. I send message on facebook pls look at that..why is this led like that? I did not make the brake and signal connection. I just uploaded the code for testing. led started to work mixed. Please help me
I see no resistors in your wiring. You have to connect all the resistors as I mentioned in the wiring diagram to make it work.
@@HAZITECH i just connected the vin, gnd and signal cables for testing.. in this case it shouldn't work but my led works mixed.. i will try what you say
Without resistors, Arduino pins will detect noise and work on it’s own. Connect the resistors and you will be good to go.
Hello mate is it possible to add program on this?
What do you mean?. Could you please explain it?
@@HAZITECH i want to make DIY like this but i want to add another sequence when im not using signal,brake,parking or hazard i want to put running rainbow lights or blinking lights if i will use signals, signals will override my running lights is it possible?
@@HAZITECH or is it possible to edit the park light color to rainbow and make it running or blingking?
Yes it is possible. But it needs quite a lot of code changes throughout. So I’ll add it to my next version.
And appreciate your support in sharing my videos to gather more audience.
Bro I need only code what is price ?
Please send me an email to info.hazitech@gmail.com or WhatsApp +94779299171
😍😍😍😍😍😍😍😍😍😍
Thanks 😊
Machan meke ardiuno coad eka denna puluwanda????
Machan mage hema video ekema wage meketh full code eke description eke link karala thiyanawa.
Ela tnx machan
You are welcome brother
That’s cool
Thanks 😊
Nice
Thanks 😊
Good
Thanks 😊
I really like your creative ideas with led ws2812b 😎
Thanks a lot 😊
💯 👌
Thanks 😊
Sir please code in discretion
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
Majestuoso
Thanks 😊
Why Do Car Manuafacturers Dont Use RGB LED? I DONT KNOW, They Don`t Eat The Power As Much, I Remember I Had A Lada And When I Turned On the Lights The Engine Started To Sound Difrently Because Of Tghe Load On Alternator, With LED Lights You DONT HAVE THAT ! Even If You Forget To Turn Them Off, They Will Not Drain your Battery As Normal Lioghtbulbs Does.
මටත් මගෙ කර් එකට හඩගන්න ඔනෙ කොහොමඩ කරගන්නෙ
Videos balagena oyatama hadaganna puluwan.
❤️🙏👏👏👏
Thanks 😊
Helo Mr. Hazi
I have send the email for you today,
Can you help me 🙏🙏
Thank a lot 🙏🙏
Hey, extremely sorry as I have a very limited time.
@@HAZITECHok no problem, thank you before,
I allready created it 🙏👍
Cool 👌🏻