ฝัง
- เผยแพร่เมื่อ 9 มิ.ย. 2021
- 🛒 Get the BIQU H2 Extruder here: geni.us/biqu3dh2
🛒 Get BIQU Filament here: geni.us/biqupla
In this video, I'll tell you my opinions on the BIQU H2 extruder, which I have mounted to my Ender 3 v2.
3D PRINTED PARTS (Preferrably print these in PETG!)
Remixed MIQU H2 mount, BLTouch and fan shroud
www.prusaprinters.org/prints/...
Biqu H2 Mount + Cover - Ender 3 CR10
www.thingiverse.com/thing:474...
BIQU H2 Ender 5 Mount and Fan Shroud
www.thingiverse.com/thing:472...
Biqu H2 Upgraded Mounts for Ender 3 v1 & v2
www.thingiverse.com/thing:471...
SAMPLE PRINTS
Voron Testcube
github.com/VoronDesign/Voron-...
3D Benchy
www.thingiverse.com/thing:763622
Vase Mode Dot Jars by Clockspring
/ taller-vase-mode-51395802
Flexible Octopus
www.thingiverse.com/thing:159217
Rectangular trash can ( Vase Mode )
www.thingiverse.com/thing:472...
THE PRINTERS I USE: kit.co/danielcrosslink/the-3d...
MY MERCH: crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - DANIEL@CROSSLINK.IO
FOLLOW ME:
INSTAGRAM - / danielcrosslink
TWITTER - / danielcrosslink
FACEBOOK - / danielcrosslink
WEBSITE: crosslink.io
The Music I use: crosslink.io/es, AMAZING for TH-camrs!
GEAR USED
kit.co/danielcrosslink/my-vid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
would love to see more of the wiring details for this installation, have not been able to find a short length one for an ender 3 anywhere
Great video, thank you! Would you happen to know the X and Y offsets for the BLTouch for your remixed mount?
My old eyes aren’t very good at measuring such things.
Drove myself insane trying to get a cr touch to work with this mount and stop the nozzle from crashing into the bed. Then I realized it was sitting too high so I used 2 nuts between the cr touch and the mount as spacers and now it works fine
Any chance you could share your print settings to achieve such amazing prints with this extruder set up?
You should show the full install which is what im here for pluging into the board
I love that you show alot of the steps but could you show us where to properly plug it in on the motherboard...
Please make updated how to for the V2 extruder?
What needs to change for the new extruder?
I like your design! Will it work on an upgraded Ender 3? I have just done, silent board, bed springs, glass build plate.
Thanks for your help.
Kurt
It would be awesome if you could make a video, about turning the ender 3 v2 into direct drive, only using 3d printed parts :)
Been thinking about it for a while, and cant really find anything on this subject, using the v2.
Awesome idea!
BMG Wind for the win!
I think that right now those long print times for single pieces is what's holding 3D printing back. Until a way to reduce those times to more reasonable values is found, companies will continue to shy away from going all out on their production lines with 3D gear. Traditional casting and molding methods while costly in terms of time and labor upfront, are faster and more cost efective once production ramps up. Injection molding and related methods are solid. Because what for-profit company can wait 38 hours for a single piece?
Hi, you forgot to add the link to your video explaining the e steps. How can I change that on my sapphire plus? I recently started using cura...
Retraction settings please? I have little bit stringing with 0,5mm and 4mm/sec but also with 2mm and 15mm/sec.
Great video, but no mention of the extruder current adjustment. Apparently, you need to adjust the current to 800mA
Thanks. 👍🏻
hello, thanks for the video. I have a longer LK5 pro. I'm trying to make it more capable of a printer. I was thinking of switching to direct drive with a higher end hot end for higher temperatures. Do you know if this setup will work for a longer LK5?
For your design, does it work with CR10-V2 BLTouch? Thank you so much
Specifications on their website says the motor has voltage rating of 3.45 volts, so is there any step down converter or it is available with 24v option?
How much is the max extruder temp?did you test it? They say you can reach 500 ° Celsius. Do you know if it is necessary to modify firmware Marlin?
I generally change my noozle 0.6 0.8 and 1.0. Could you Tell me about It. It's more hard to change?
🛒 Get the BIQU H2 Extruder here: geni.us/biqu3dh2
🛒 Get BIQU Filament here: geni.us/biqupla
In this video, I'll tell you my opinions on the BIQU H2 extruder, which I have mounted to my Ender 3 v2.
1/2 the weight of the a Herema?
Yes, almost. The Hemera is 388 with hotend, the H2 is 219g
I generally change my noozle 0.6 0.8 and 1.0. Could you Tell me about It. It's more hard to change?
Kannst du mir vielleicht deine Firmware zur Verfügung stellen mit deinen Änderungen.
Ich habe zwar den Umbau fertig aber mit der Firmware klappt es bei mir irgendwie nicht
hmmm, i want to print ultra soft tpu - so this is not the best for that? what is recommended instead?
Hey, thank you! I've been waiting on your review on this one since you announced it in the unpaking video. I would have liked a more specific view on the advantegaes/disadvantages on this upgrade. How does it perform compared to other solutions for Direct extruding? I would like to have an easy way to add a direct extruder but without loosing the speed on PLA Printing (adding to much weight on the moving axes).
Hey, Eduard. I like this one specifically for it being light weigt compared to the Hemera that I have on my AM8. Print speed of 50-60mm/s is not an issue, works fine. Anything higher I didn't test yet but I can do some more research and tell you about the results in a follow up. Keep the questions coming!
Hi! Nice video. I installed H2 to my Ender 3 pro, but is it me or are the wires bit too short. For lower prints its ok but about over 15cm the cable will start to interfete with bed.. Can you show your wiring? Thanks amd keep up good work!
is there a specific video you watched on how to install? I'm still so confused I have everything in place but I'm not sure about the wiring and e step configuration.
i need to change my E-step to about 944 with the BIQU H2, but the limit is set to 186 or something on my Ender 3 V2. How can i manage to increase the max E-step transmition ratio setting?
What are your tip offsets
He forgot to mention, you need to adjust your firmware for the thermistor type. its either 1 or 5 depending on the model it seems.
Looks like it would be a pain if you want to remove the BIQU H2 to work on it.
Hey!, does anyone mount this plate with the cr touch? Im looking for a file to fix it..
hey I need the firmware with your settings.
Hello Crosslink! I have a 3d printer anet a8 changed the thermistor problem temperature jump after 210 degrees spruce rises 225-235-210 thet's how it turned out if you can help me please. As you shewed the flashing of marlin l can't do it. You're a protessional.
You will have much more luck posting this question on the Reddit sub for your printer model, or other online 3D printing forum than you will by posting it as a TH-cam comment.
I have this extruder for the same printer and I cannot seem to get the fan to power on as well as experiencing some under extrusion. Any ideas?
the best guess is to check the polarity of the fan cable connector vs. the mainboard. sometimes, those cables need to be swapped.
Hi what did you print the parts in originally? PLA?
I did the first batch in PLA then replaced everything with PETG. The PLA was too brittle to tighten the screws properly into it.
Is your BIQU extruder clicking when retracting filament? I would really like to know if I got faulty item or is this clicking present in all models...
There are a few places online where guys mention that their H2’s click during retraction. I think Teaching Tech mentions this in his H2 video.
idk why it does that, sometimes it does sound faulty and then many other prints, not a single click.
You need to set retracton to .5mm. And the retracton speed to 4mm a sec.
💕😍👍
I’ve just installed the H2 V2 on my ender, so I loose any build volume? I seem to remember someone stating you do on a Reddit post. I can’t seem to find any information about it anywhere
The cables are too short
Agree, you have to extend the cables about 20cm so you can run them properly and they won’t block the gantry from going all up
@@Crosslink3D and do you have the firmware for it ?
Can i use the 3d print files and extruder with my anycubic vyper?
The mounts are Ender 3 specific. I doubt
Could you imagine that you buy this extruder because your "hotend" is already clogged andnot able to print anything anymore ..
Bro my Prusa won’t stop clogging I’m just gonna buy an ender 3. just buy a Prusa they said💀
Just drill holes in the spools. Simple fix that everyone seems to forget.
I'm installing an h2 on my ender now, how did you do the wiring for the 4pin to the motherboard I can't find a pin out
Same here, i also don't know where to plug it. Did you find out?
@@10fersen it goes right in the old 4 pin hole if you get it backwards it's not a big deal the filament will just go backwards and you'll need to flip it the other way
Cool
Thanks!, what did you like most?
@@Crosslink3D looks easy to install
@@Crosslink3D hey I have a tronxy XY 2 pro witch not many people have but it has a touch screen and a autoleveler and it only costs 180 dollars is there a chance you will review it ?
I am reducing the number of reviews throughout this year. I will do a bunch of printer reviews until end of year but currently I am not taking any new stuff.
hey can somebody help my 3d printer is rep rap arduino when i try to print calibration cube the z axis keep lifting the cube is 20mm height but the z axis keep lifting and printing i dont know why really desperate its been a month its overlifting i use sli3r to slice my modek help please its not stop lifting
What exactly do you mean by lifting. Are things not sticking to the build surface?
@@Crosslink3D listen first layer is fine but i print 20mm test cube height it should stop at that height why in the world it does not stop printing yet it goes and reaching limit and broke the printer its just rep rap arduino
@@AAAA-tp4gw what firmware are you using grbl?
@@Crosslink3D my printer x,y axis print correctly but z is problem i place everything correct yet when printing 20mm cube the z itself will go up upper till reaches the end of the rod till i have to shut it down .when i print 20mm height it should stop at that 20mm height but this is wrong it will just printing without stopping
@@itsmealextheme6259 its marlin 1.1 x bugfix also i use sli3r to slice model
Hi i have ender 3 v2 as you can you share the firmware with the mods i mean the bin file
I need the firmware to.
Bitte
Found any solution?
Can you remotely via the internet my 3d printer?
Lmao
NGL, I do like the look of the extruder, but I'm sticking with my E3D Hemera. Quality British engineering right there.
That original blower fan is terrible. Lots of noise and not much air pushed. 40mm noctua is so much better, but because it's not a blower, it needs adapter or modification to the design.
Instructions how to fix the gears, needed from what I see
This mount for ender 3 is total garbage
Aaaargh. Please stop. It's a Chinese company. Bye queue is grating. BIQU in pinyin should be pronounced like bee tchu. Thanks.