If those are the EZ-Lube hubs, which it appears they are, by the black plug on the dust covers, then you do not need bearing buddies. You have something even better! Pull a cover off, if you see a grease zert, you are golden! The way those are made, the spindle is hollow, the zert is screwed in the end. Pump grease in, it goes to the rear of the hub in the spindle, goes out a hole, to the front, on the outside of the spindle. Pump until you see new grease. Look up a video on them. I LOVE them! You can repack bearings, by never removing the hub. Just make sure and don't over pressurize, you'll blow out the rear seal. However, I've yet to do this.
@@fishingismydrug1 Thanks for the information! This sounds perfect! I have not had time to inspect them since my purchase, but will definitely make sure I take a closer look! You just saved me some money for sure!
If those are the EZ-Lube hubs, which it appears they are, by the black plug on the dust covers, then you do not need bearing buddies. You have something even better!
Pull a cover off, if you see a grease zert, you are golden! The way those are made, the spindle is hollow, the zert is screwed in the end. Pump grease in, it goes to the rear of the hub in the spindle, goes out a hole, to the front, on the outside of the spindle. Pump until you see new grease.
Look up a video on them. I LOVE them! You can repack bearings, by never removing the hub. Just make sure and don't over pressurize, you'll blow out the rear seal. However, I've yet to do this.
@@fishingismydrug1 Thanks for the information! This sounds perfect! I have not had time to inspect them since my purchase, but will definitely make sure I take a closer look! You just saved me some money for sure!