Products that we use and recommend: ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Mobil 1 Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► Voltmeter: amzn.to/4hB6Zvk ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
World Mechanics my obd2 will get power in certain positions; at an angle or with slight pressure applied. Will not get power plugged in normally. Vehicle is a 2014 320i xdrive (F30/N20). Will I need to repair the actual port? I’m lost
4 years after your post I fixed a non working OBD port on 06 HD2500 truck. Wondered why only one of the power ports worked. Now I have two power ports that work and I have cleared a couple problems with my OBD reader. Thank you!!!!!!!!
You just saved me hours and hours of aggravation. I my case it was corrosion on the load side of the fuse so the fuse tested good using a voltmeter. When I replaced the fuse, the car started right up. Thank you!
I remember a few months ago, I was trying to get a key fob to work. Had to short out a couple deals on the OBD connection. It did spark a little. I checked the cigarette fuse. Sure enough it was bad. Replaced the fuse, worked like a champ. Many Thanks.
this is maybe one of the most hopeful videos on the web i have seen regarding auto repair. i have seen some of you videos which i liked , i am mostly into audis but am working on a gmc now. you have saved me soo much frustration because how can you fix what cant be seen, SUBSCRIBED and THANKS A BUNCH
Thanks for this advice guys. For me and my 2009 MK7 Ford Transit, the issue wasn't the Aux or cigar lighter fuses but the interior lamp fuse (#72), labelled as battery saver/OBD II (D'oh!). As soon as I fitted a new fuse, bingo! I am SO relieved, as I thought I'd bought a non-compatible reader.
A bit difficult to understand initiallt, but when you put the agnst your feeling because your obcd isnt posting ASIDE, take a deep breath, let it. This dude is here to help us. By tge end, its all xlear. Thanks dude!
Thank you! I knew the cigarette lighter fuse was accidentally popped when metal recently fell into the open socket. But I never thought of that as the reason why two OBD scanners would not work. Great tip, and thanks again!
Hey didn’t even know my 3rd gen 4Runner had an actual OBD fuse in the engine compartment. Just bought a OBD2 bluetooth reader but wouldn’t turn on. Stubble on your video, wiggled & pushed the fuse. Problem solved THANKS to you guys !
I was towing a 38' toy hauler and my trucks conks out. On top of that my obd2 didn't work! Your vid was the first one I checked and the blown cigarette lighter was the the problem! I got the codes pulled right away and it saved the day. Thanks for saving me a big headache.
Thank you very much man my brother come over today and say his Port was not working and I told him he had to be a fuse I did not believe me at first try I checked all the fuses yeah it's working again
DUDE ..... you save my ass... i was clueless on how to get the engine to start..... replaced fuse ... started right up.... THANK YOU SOO MUCH... 97 jeep Zj obdII was not reading.... new fuse .... saved me a wrecker tow & shop repair bill
Brother you just saved me so much with this video. I use my port for WiFi and I really needed it for my mobile office thank you so much I will subscribe to you
Awesome, and helpful Guidance/Video. You are certainly a World Mechanic! Well I do have a similar problem, and the Scanners, does light up, yet it says No Link! After 20 years, for the first time I removed a Fuse Box cover and saw an OBD fuse, not in place 7.5 amp it is the first time I even found that Fuse Panel. I believe it is for another model, and everything came as-is from Japan. 2002 Toyota Corolla 1,5 NZR-121 FE. Are the Scanners Lighting up because it has direct power, and the 7.5 amp Fuse is needed is my question? Anyway, I used at least 6 different models OBD ll, same. Thanks for sharing your Video!
Thanks very much for the info. You saved me over US$250. I checked the Engine Control Module (ECM) fuses and they were good, I thought about replacing the computer but that was US$250 + tax, then I seen your video & replaced a missing fuse!
Thank you sir I’ve been dying to find out why my Bluetooth odb2 scanner hasn’t been turning on when I connect to my brothers car, but will work fine on my car 🤷🏼♀️ lol once again thank you
Many thanks for the help My 2005 Saturn Vue 2.2 L four-cylinder OBD two port is not working at this point, I will check those fuses and hopefully replacing one or both of them will fix the problem thanks again for your excellent video
What about if the OBD port has power and grounds. It also has 60ohms of resistance (terminator resistors for communications). Yet it still will not send any data to scanners. Any idea what you think the issue is?
YOU GUYS WITH THE THUMBS DOWN HAVE TO UNDERSTAND THIS WONT WORK ON ALL VEHICLES, IT WORKED FOR HIS, SO HE MADE A VID ABOUT IT, DON'T GET DOWN ON HIM B/C IT DIDNT WORK FOR YOUR PINTO, WITH FLAMES
Aww, come on! This fix is supposed to fix EVERY symptom from every make, every model, and every year! HAHA, this did not solve my problem today, but I will keep it in mind for the future and he gets a thumbs up for sharing, just like everyone who makes a video. All you guys have saved me over 10K in repair charges of the last 7 years!
I was gonna give a thumbs down... Not because it wasn't helpful, but because that damn voice & way he conveyed the english grammar. My laaawwwwdddd I could punch a child to get that to stop. Gtg, my blood pressure/irritability level is thru the roof & pretty sure my ears are bleeding.. 😒🙄😬😤
Good vid .. Ive had a problem with my Honda CRVMk3 OBD2 socket not working with handheld scanners. There are no fuses blown and no faults anywhere. Thing is, Ive just tried it with a cheap ELM327 off ebay via bluetooth and you wont believe, it works..!! so really dont know why the handheld scanners wont connect yet they work with my Seat Ibiza
@@vladimiralvarez1162 not same problem. I could not read anything on obd2 reader. I check fuse and it was missing. Check ur fuse that powers ur engine diagnostics . If u have recently disconnected ur battery and fixed ur bad cords you would have to drive your about 50 miles so ur computers can check it self internally. Allowing technician to do smog check. Hope I helped . Do u have ur own obd2 scanner?
Ozzie Martinez thanks for heads up ..I’ll drive it some more hope that works ..no I don’t have one of those but I’ll borrow my brothers and see if it can detect anything ..my engine light has never been on ..it turns on when I turn it in but it disappears when engine is on ..I’ll check my fuses too
Ozzie Martinez thanks ozz !! No mon my bud was able to set my sensors and it was able to pass!!!! Feeling positive right now ! I own a Porsche Boxter S brethren and believe me I was afraid it was the catalytic converters....anyway thanks for getting back and sending good vibes ..
@@ChicagoWESTTOWN476 my fuse to the cigarette lighter was blown. When I tried to use the OBD2 port it wouldn't power on the scanner. Once I changed the fuse it worked perfectly.
Ok, this might have solved my problem, like that my obd2 socket isn't working, and watching this video, my AUX socket has no power, I just figured it wasn't a powered socket, but thinking about it, it really should be, in order to read stuff. So I'm going to check this out and I'll update below 🤞
Nice video. Can you help with my 2006 Lexus IS 250, Scan tool powers ON but wont communicate with ECU, tried different scanner and its same thing. Also the cigarette and back output outlet not working. Check fuse but its ok. Kindly assist.
Get a Actron CP9680 to further test codes and diagnose. It does graphing, record, live, ABS, SRS, transmission tests, and MORE! It has code-connect to diagnose codes. The CP9690 is for OBDI and OBDII. It has cables for OBDI Ford, G.M., Chrysler, and 2 Toyota. It uses small aa batteries. Get a wall charger cable for a Tom Tom One GPS to review results in your home. EBAY has it. On the live test, if it says 'incomplete', that means you need to drive it some more to complete the test.
Having a problem with my Opel Astra G's obd2 port. Tried several different scanners and plug in Bluetooth adapters where you have to download an app to your android phone in which to use the scanner. No joy with any of them. It provides power to whatever device is plugged into the port, but none of the devices I've tried will communicate with the ECU on my car. Always says failed to connect. Any help regarding this issue would be gratefully appreciated. Thanks
@@Laikipian I later found out that expensive obd 2 scanners work on my 03 astra, but still no joy with my own scanners. Seems to differ from year of manufacture. My 03 astra won't comunicate with the scanner, but yet my 04 astra will work with the same cheaper scanners perfectly. They're both the same car, just a years difference. Annoying. If your car is vauxhaull, then you may need to get OP-COM
I'm trying to troubleshoot the OBD connector on a 2009 Saturn Aura. I've checked out fuses in the passenger compartment, the engine compartment, and in the trunk. All seemed okay. I also checked voltage at the pins on the connector and there were 12 volts across a few of the pins. Not sure what to think at this point. Any suggestions?
Anthony Follett. The lighter plug might be shorted. Replace the lighter plug if the lighter don't work. The plug is the part with the element to light a cigarette.
MY OBD2 port has no signal . 1998 BMW 540i. Checked fuses and they tested good. My round 20 pin OBD connection in the engine bay works just fine. I had one code for evap urge control valve/ fuel tank breather valve. This should have thrown a check engine light but it didn't. I'm guessing because the OBD2 is not working. Any suggestion for the OBD2? I need to get my DMV smog emission test done and they need to connect to OBD2. Thanks.
If fuse is NOT the reason for this, can the cubus module be the next culprit if the issue? Bc i have a code lost cominication w the ECM/pcm!! But at that time i was able to use the scaner to get this codes aling with other codes all w letter P u!!! Cominicatiin codes!! So i am thinking it has to be no signal to the ob2 port from the cunbus module!! I cheked cig lighter guse was blowen and changed it w same 20 A fuse but still no signal to the scan tool nd no light on the scan tool ! Nothing !! Any suggestions pls will be appreciated! Ty subbed as well 👍🏼😊
my toyota has a 7.5amp fuse for the obd. what would cause it to blow? the fuse for the interior light and cigarette lighter is separate from the obd port too.
THANK YOU for this video!! I found the problem! The fuse blew because the red wire attached to the OBD connection was a little bare and shorted causing the fuse to blow. Than you!!!
I checked my fuses and they're all good and have power going thru. But when I start, it's still hard and if I do manage to start it. It'll have really rough idle and stall out within 30s
steven smith Check the cigarette lighter if the code-tester don't communicate. The element can short. Check with a test light on both terminals of the fuse. Remove the fuse and test with a test light if it lights only on one side. It should. Test for a drain with a test light at the battery clamp and post with the cable disconnected. Get a Actron CP9680 code tester.
steven smith Get a Actron CP9680 code tester. It checks live, record, graphing, transmission tests, emission readiness test, ABS, SRS, and MORE! It comes in a black carrying pouch. The screen is well-lit! Get 4 aaa batteries for under the rear cover. It has code-connect to diagnose codes. EBAY has it.
Products that we use and recommend:
► Panel Removal Set: amzn.to/3YiMADu
► Assorted Fuses: amzn.to/4fx4s3F
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Mobil 1 Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► Voltmeter: amzn.to/4hB6Zvk
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
World Mechanics my obd2 will get power in certain positions; at an angle or with slight pressure applied. Will not get power plugged in normally. Vehicle is a 2014 320i xdrive (F30/N20). Will I need to repair the actual port? I’m lost
Thank you.you helped me figure out why mines wasn't working
4 years after your post I fixed a non working OBD port on 06 HD2500 truck. Wondered why only one of the power ports worked. Now I have two power ports that work and I have cleared a couple problems with my OBD reader. Thank you!!!!!!!!
You just saved me hours and hours of aggravation. I my case it was corrosion on the load side of the fuse so the fuse tested good using a voltmeter. When I replaced the fuse, the car started right up. Thank you!
I remember a few months ago, I was trying to get a key fob to work. Had to short out a couple deals on the OBD connection. It did spark a little. I checked the cigarette fuse. Sure enough it was bad. Replaced the fuse, worked like a champ. Many Thanks.
this is maybe one of the most hopeful videos on the web i have seen regarding auto repair. i have seen some of you videos which i liked , i am mostly into audis but am working on a gmc now. you have saved me soo much frustration because how can you fix what cant be seen, SUBSCRIBED and THANKS A BUNCH
Agreed! Great content here on world mechanics and on the other channel the Repair Guys!
Thanks for this advice guys. For me and my 2009 MK7 Ford Transit, the issue wasn't the Aux or cigar lighter fuses but the interior lamp fuse (#72), labelled as battery saver/OBD II (D'oh!). As soon as I fitted a new fuse, bingo! I am SO relieved, as I thought I'd bought a non-compatible reader.
A bit difficult to understand initiallt, but when you put the agnst your feeling because your obcd isnt posting ASIDE, take a deep breath, let it. This dude is here to help us. By tge end, its all xlear. Thanks dude!
English?
Thank you World Mechanics! You guys saved me. The fuse was bad on my truck, replaced it ALL IS GOOD with the WOLRD.
Thank you! I knew the cigarette lighter fuse was accidentally popped when metal recently fell into the open socket. But I never thought of that as the reason why two OBD scanners would not work. Great tip, and thanks again!
im
Hey didn’t even know my 3rd gen 4Runner had an actual OBD fuse in the engine compartment. Just bought a OBD2 bluetooth reader but wouldn’t turn on. Stubble on your video, wiggled & pushed the fuse. Problem solved THANKS to you guys !
I was towing a 38' toy hauler and my trucks conks out. On top of that my obd2 didn't work! Your vid was the first one I checked and the blown cigarette lighter was the the problem! I got the codes pulled right away and it saved the day. Thanks for saving me a big headache.
You guys helped me so much on my repairs to my 2012 Kia Forte in the past ! I love you and thanks again
Which fuse was it for your car?
You guys just saved me a big headache!!
Thank you. Keep those helpful videos coming
Thank you very much man my brother come over today and say his Port was not working and I told him he had to be a fuse I did not believe me at first try I checked all the fuses yeah it's working again
Thanks! My front accessory fuse in my 2004 Rendezvous was blown. It was because a penny fell into the cigar lighter socket. OBD reader is working now.
DUDE ..... you save my ass... i was clueless on how to get the engine to start..... replaced fuse ... started right up.... THANK YOU SOO MUCH... 97 jeep Zj obdII was not reading.... new fuse .... saved me a wrecker tow & shop repair bill
So your car didn't crank or no power ? What was wrong with your car?
Great tip. Not knowing which fuse would have taken me a lot of time. Sure enough, the fuse was missing.
you just saved me a week's work , thank you so much
Brother you just saved me so much with this video. I use my port for WiFi and I really needed it for my mobile office thank you so much I will subscribe to you
WOW I just bought a 02 trailblazer with the same problem thanks for the great video REALLY APPRECIATE YOU 👍👍😎
Awesome, and helpful Guidance/Video. You are certainly a World Mechanic! Well I do have a similar problem, and the Scanners, does light up, yet it says No Link!
After 20 years, for the first time I removed a Fuse Box cover and saw an OBD fuse, not in place 7.5 amp it is the first time I even found that Fuse Panel. I believe it is for another model, and everything came as-is from Japan. 2002 Toyota Corolla 1,5 NZR-121 FE. Are the Scanners Lighting up because it has direct power, and the 7.5 amp Fuse is needed is my question? Anyway, I used at least 6 different models OBD ll, same. Thanks for sharing your Video!
Saved me a lot of trouble finding the problem just a blown fuse easy fix thanks alot
Thanks very much for the info. You saved me over US$250. I checked the Engine Control Module (ECM) fuses and they were good, I thought about replacing the computer but that was US$250 + tax, then I seen your video & replaced a missing fuse!
What tis the make and model of your vehicle sir? Thx
Im guessing its missing a fuse because it keeps blowing fuses
I love seriously practical info! You are fabulous! Thank you!
Thanks bro. Great info. My port wasn't working and just went and replaced the fuse that someone had removed.
Mine was labeled "cigar". Thanks for the help. Saved me time and money.
wayne miller The lighter element can be shorting.
And this is why we learn every time something from this channel! Great!
Thank you sir I’ve been dying to find out why my Bluetooth odb2 scanner hasn’t been turning on when I connect to my brothers car, but will work fine on my car 🤷🏼♀️ lol once again thank you
Thanks man. You saved me a lot of trouble!
Many thanks for the help
My 2005 Saturn Vue 2.2 L four-cylinder OBD two port is not working at this point, I will check those fuses and hopefully replacing one or both of them will fix the problem thanks again for your excellent video
In my case the cigarette fuse was blown out the video helped out a lot thanks
I have a 2003 GMC Sonoma thanks for making this video indeed it was the 15 amp fuse on the driver side fuse cluster on the inside of the truck 😂
What about if the OBD port has power and grounds. It also has 60ohms of resistance (terminator resistors for communications). Yet it still will not send any data to scanners. Any idea what you think the issue is?
Did you find a solution?
Yeah… did you? Lol I’m dealing with the same issue.
Did you find the answer haha
this is why I refuse taking my cars to shops (in Jamaica, Queens)
YOU GUYS WITH THE THUMBS DOWN HAVE TO UNDERSTAND THIS WONT WORK ON ALL VEHICLES, IT WORKED FOR HIS, SO HE MADE A VID ABOUT IT, DON'T GET DOWN ON HIM B/C IT DIDNT WORK FOR YOUR PINTO, WITH FLAMES
Aww, come on! This fix is supposed to fix EVERY symptom from every make, every model, and every year! HAHA, this did not solve my problem today, but I will keep it in mind for the future and he gets a thumbs up for sharing, just like everyone who makes a video. All you guys have saved me over 10K in repair charges of the last 7 years!
The video was way longer than it needs to be, and it was a fuse... literally the first thing anybody would check...
I was gonna give a thumbs down... Not because it wasn't helpful, but because that damn voice & way he conveyed the english grammar. My laaawwwwdddd I could punch a child to get that to stop. Gtg, my blood pressure/irritability level is thru the roof & pretty sure my ears are bleeding.. 😒🙄😬😤
I hope it works on my truck. I just found out my port . Cigarette lighter and phone port doesn't work
You save me time and money with this video. Thanks
Nice one guys! I took a chance I clicked on your video and low and behold there was the answer! Thanks!
Dude u totally saved my car or at least hundreds of dollars thank you so much man :)
Man I’m over here going crazy thank u let me get up n fix dis problem
You guys made some good videos. Where are you guys originally from? Love your videos.
He told me to check the fuse. I checked the fuse. The fuse was blown. I replaced it and now it works...lol Thank you for the video it did help me!
Tyler Check the cigarette lighter for a short if in the circuit.
You saved my life man!
If I could repay you somehow I would
Your the man just fixed my problem thanks dude
Yote Smoker Check the cigarette lighter if the fuse blows. It can short and cause the fuse to blow.
Good vid .. Ive had a problem with my Honda CRVMk3 OBD2 socket not working with handheld scanners. There are no fuses blown and no faults anywhere. Thing is, Ive just tried it with a cheap ELM327 off ebay via bluetooth and you wont believe, it works..!! so really dont know why the handheld scanners wont connect yet they work with my Seat Ibiza
Your a life saver thank you so much. This was my problem and it was driving me crazy.
Ozzie Martinez I have some prob on my Porsche that it shows it won’t pass smog cause it’s not ready ? Is that he same prob you had ?
@@vladimiralvarez1162 not same problem. I could not read anything on obd2 reader. I check fuse and it was missing. Check ur fuse that powers ur engine diagnostics . If u have recently disconnected ur battery and fixed ur bad cords you would have to drive your about 50 miles so ur computers can check it self internally. Allowing technician to do smog check. Hope I helped . Do u have ur own obd2 scanner?
Ozzie Martinez thanks for heads up ..I’ll drive it some more hope that works ..no I don’t have one of those but I’ll borrow my brothers and see if it can detect anything ..my engine light has never been on ..it turns on when I turn it in but it disappears when engine is on ..I’ll check my fuses too
@@vladimiralvarez1162 might need a new gas cap. That's something that comes and goes triggering check light
Ozzie Martinez thanks ozz !! No mon my bud was able to set my sensors and it was able to pass!!!! Feeling positive right now ! I own a Porsche Boxter S brethren and believe me I was afraid it was the catalytic converters....anyway thanks for getting back and sending good vibes ..
It's not always the fuse. Sometimes it can be due to a poor connection in the car's internal wiring.
wow what an embarrassingly simple fix.
😂👍 Thanks bro
Thx guys for Helping me look in the right direction 👍👏
I about to try this out, results shortly.
Amazing, this has helped so much. Thank you!!
First Name Last Name what happened?
@@ChicagoWESTTOWN476 my fuse to the cigarette lighter was blown. When I tried to use the OBD2 port it wouldn't power on the scanner. Once I changed the fuse it worked perfectly.
Greate video , just sorted my nissan nv200 obd not powering. Thanks a lot!
Tnx I fixed right away after watching you video 🍻
Man these cats just saved me from pulling my hair out and I’m bald head. Lol. Thanks
Same thing happened on my 02 Silverado! Thanks for the tip!
Sounds like a winner, ill check it out and thanks in advance.
Thanks man I couldn’t find the fuse on my 2002 S10 under the hood but is was on the drivers side door fuse panel.
Thanks!! Keep the videos coming!! My fuse was burned just like you said!!
Wow !!! Thank YOU so much ! Valuable information !!!!!
Thank you so much...You saved me a lot of headaches .
Thank you very much, it did help me my 2009 hummer H3
👍🏿🙏🏿
Ok, this might have solved my problem, like that my obd2 socket isn't working, and watching this video, my AUX socket has no power, I just figured it wasn't a powered socket, but thinking about it, it really should be, in order to read stuff.
So I'm going to check this out and I'll update below 🤞
Nice video. Can you help with my 2006 Lexus IS 250, Scan tool powers ON but wont communicate with ECU, tried different scanner and its same thing. Also the cigarette and back output outlet not working. Check fuse but its ok. Kindly assist.
Get a Actron CP9680 to further test codes and diagnose. It does graphing, record, live, ABS, SRS, transmission tests, and MORE! It has code-connect to diagnose codes. The CP9690 is for OBDI and OBDII. It has cables for OBDI Ford, G.M., Chrysler, and 2 Toyota. It uses small aa batteries. Get a wall charger cable for a Tom Tom One GPS to review results in your home. EBAY has it. On the live test, if it says 'incomplete', that means you need to drive it some more to complete the test.
Thank you guys!
Very helpful I have a 2007 Cadillac Escalade. This worked it was the Aux power beside pop tray.
Hello, Doctor Bashir.
Thanks to u i found the fuse that is connected to my obd cable thanks lot
Thank you .... 07 Silverado cigar fuse = obd power also ...
Check the interior light fuse also thats what fixed my 98 civic thanks for pointing me in the right direction tho
But my interior lights are working though in my 98 civic ex.
Having a problem with my Opel Astra G's obd2 port. Tried several different scanners and plug in Bluetooth adapters where you have to download an app to your android phone in which to use the scanner. No joy with any of them. It provides power to whatever device is plugged into the port, but none of the devices I've tried will communicate with the ECU on my car. Always says failed to connect. Any help regarding this issue would be gratefully appreciated. Thanks
Hi You ever Got help with this ? facing the same probs now.
@@Laikipian I later found out that expensive obd 2 scanners work on my 03 astra, but still no joy with my own scanners. Seems to differ from year of manufacture. My 03 astra won't comunicate with the scanner, but yet my 04 astra will work with the same cheaper scanners perfectly. They're both the same car, just a years difference. Annoying. If your car is vauxhaull, then you may need to get OP-COM
Thanks sooo much. Fixed my problem in a Hyundai excel 1998. Power now to the port by changing a fuse
I'm trying to troubleshoot the OBD connector on a 2009 Saturn Aura. I've checked out fuses in the passenger compartment, the engine compartment, and in the trunk. All seemed okay. I also checked voltage at the pins on the connector and there were 12 volts across a few of the pins. Not sure what to think at this point. Any suggestions?
My 2007 is in the shop with the same problem. They want to replace my BCM for $650, and they're not even sure that's the problem.
@@rd7264 Mine ended up being a bad sensor. I replaced the bad sensor and was immediately able to communicate.
@@rd7264 This was the sensor that I replaced 1st. After that, the Scan tool was able to communicate fine.
www.amazon.com/gp/aw/d/B07QJ8WB41
Good information. I hope it will help me.
Hello Smart man... This is a very helpful video
Hey buddy, which fuse to change for 2016 Ford Fusion SE when OBD is not working
Gracias 🙏🏼 Amigo 🇲🇽 👨🏻🔧
My manual calling it a data link connector and I was looking for the MIL connector, doh! Thanks for the tip on the same line as the lighter fuse.
Anthony Follett. The lighter plug might be shorted. Replace the lighter plug if the lighter don't work. The plug is the part with the element to light a cigarette.
My Nissan Frontier doesn’t work my obd2 gonna try this out tómorow thanks subscribed
THANK YOU!!!!HAD THIS PROBLEM ON 2000 S-10 PICKUP
Thank you. For. Saving me a lot of time
Thank you! You just helped me with my H3
Thanks for the helpful video guys!
MY OBD2 port has no signal . 1998 BMW 540i. Checked fuses and they tested good. My round 20 pin OBD connection in the engine bay works just fine. I had one code for evap urge control valve/ fuel tank breather valve. This should have thrown a check engine light but it didn't. I'm guessing because the OBD2 is not working. Any suggestion for the OBD2? I need to get my DMV smog emission test done and they need to connect to OBD2. Thanks.
Thank you. You just savef me a lot of money.
Wa wa wee wa, he fixed it!
If fuse is NOT the reason for this, can the cubus module be the next culprit if the issue? Bc i have a code lost cominication w the ECM/pcm!! But at that time i was able to use the scaner to get this codes aling with other codes all w letter P u!!! Cominicatiin codes!! So i am thinking it has to be no signal to the ob2 port from the cunbus module!! I cheked cig lighter guse was blowen and changed it w same 20 A fuse but still no signal to the scan tool nd no light on the scan tool ! Nothing !! Any suggestions pls will be appreciated! Ty subbed as well 👍🏼😊
my toyota has a 7.5amp fuse for the obd. what would cause it to blow? the fuse for the interior light and cigarette lighter is separate from the obd port too.
My problem is sort out this video thank you brother
THANK YOU for this video!! I found the problem! The fuse blew because the red wire attached to the OBD connection was a little bare and shorted causing the fuse to blow.
Than you!!!
Thanks I was having issues with this
i am having the same issue on my 97 honda civic hatchback i need to know how it will work, can you please make a video on this exactly car
Did you ever figure it out
I checked my fuses and they're all good and have power going thru. But when I start, it's still hard and if I do manage to start it. It'll have really rough idle and stall out within 30s
I am currently having a similar issue. I'm working on it, will get back here if I figure it out.
@@willmooneyham1842 thank you very much for your effort. I am also trying to diagnose it myself lol, we'll meet back up here and update each other.
Very good advice thanks pal
Thanks Boys, 👍🏻👍🏻
Thank you so much for posting this video
steven smith Check the cigarette lighter if the code-tester don't communicate. The element can short. Check with a test light on both terminals of the fuse. Remove the fuse and test with a test light if it lights only on one side. It should. Test for a drain with a test light at the battery clamp and post with the cable disconnected. Get a Actron CP9680 code tester.
Thanks for sharing 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
This was a huge help
steven smith Get a Actron CP9680 code tester. It checks live, record, graphing, transmission tests, emission readiness test, ABS, SRS, and MORE! It comes in a black carrying pouch. The screen is well-lit! Get 4 aaa batteries for under the rear cover. It has code-connect to diagnose codes. EBAY has it.
You guys are awesome. Thank you
Love your accent... Thanks. But I can't find the oBD port for Mitsubishi Lancer 2009
great video, thx guys
Awsome video saved my life bro thanks
Bro thank you so much, awesome video 👍🏼