Nice to see that even for an expert, it's still a bit of a struggle :) Daniel made it look way too easy in the old video. Luckily, the rear wheel doesn't have to be removed often and with a bit of practice, it's not so bad.
With 40 employee's I am not working that oft anymore with my own hands. But I think it is okay that I show that it is not extremely easy. It is the true.
First of all... excellent video instruction... However... It seems that the access panel is positioned too far to the rear of the axle... or it is just a bit too small and limiting... but hey, what do I know. I have full access to my drive train on my WAW. Though I have been considering an Alpha 7.
Did you already to try to work with an alpha 7. Because the rear suspension is different as in WAW I dont see a big need for the complete tail to be removeble
I understand. To remove velomobile alpha7 rear wheel is very difficult job. Is this wheel hub a straight pull? How to change xdr hub or micro spline hub?
I’ve used Daniel’s video and I lay my DFXL on its right side to position the hub over the free hub that is barely protruding into the wheel well. As Daniel shows, the last step is to push the pawls in to allow the wheel to drop down . I do not see you covering this important point.
We hope to see more videos like this !
Just a small advice : don't use music if this is not needed. A good inspiration is GCN with their tutorials
Ok thanks!
Nice to see that even for an expert, it's still a bit of a struggle :) Daniel made it look way too easy in the old video. Luckily, the rear wheel doesn't have to be removed often and with a bit of practice, it's not so bad.
With 40 employee's I am not working that oft anymore with my own hands. But I think it is okay that I show that it is not extremely easy. It is the true.
I wasnt able to pull out the axle like you showed. I had to build an extraction tool, which struts against the swing arm.
It sometimes is a bit of a struggle to get it out.
Does the Strada have the same setup?
Only the carbon strada has the same setup the glas fiber do not
.
First of all... excellent video instruction...
However... It seems that the access panel is positioned too far to the rear of the axle... or it is just a bit too small and limiting...
but hey, what do I know. I have full access to my drive train on my WAW. Though I have been considering an Alpha 7.
Did you already to try to work with an alpha 7. Because the rear suspension is different as in WAW I dont see a big need for the complete tail to be removeble
I understand. To remove velomobile alpha7 rear wheel is very difficult job.
Is this wheel hub a straight pull?
How to change xdr hub or micro spline hub?
.
From my point of view, it is more comfortable, to lay down the VM on the right side (on a desk or so).
At least for the reassembly
I will try onces
I’ve used Daniel’s video and I lay my DFXL on its right side to position the hub over the free hub that is barely protruding into the wheel well. As Daniel shows, the last step is to push the pawls in to allow the wheel to drop down . I do not see you covering this important point.
at 08:26 there is the shot
The music is far too loud compared to your voice.
I will check for next video
fixed thanks for the feedback
The music makes it difficult to hear the instructions!
we will fix it