Very well done video, I am just confused a bit trying to apply this to my Futaba 9c with a Frsky module. I can't find the failsafe setting but I think it's because my setup is for PPM?
As i understand, in the part GPS/Atti/Manuel to failsafe mix, I couldent make the Atti to Failsafe. it goes to failsafe on GPS and manuel mode but in Atti, mix dont work. How can i solve this problem ?
hi ali, ive tried to make this with f550 and dji naza m V2 and same t8j controller, but seems not to work, is diff configuration for f550 or for naza v2????
Hi, Alishanmao, I am in the process of building a quardcopter using a Hoverfly pro with hoverfly GPS. Alone with that i have a futaba T10J. The question that I would like to educate from you is why would you set the parameter to a Acrobatic not Multirotor? and could you do a video how to set up futaba T10J. Thank you
Hi Ali, Great video, is there any chance that you could do one explaining how to set up the Spectrum DX8 radio including the use of IOC please, the Futaba is really different and I ,can't work it out, theres a beer in it for you.... cheers
Hello! Your video is so helpful, thank you for taking the time to make it! I have a question though, I am using a FUTABA 9C concerted to spektrum 2.4, regarding failsafe, in my manual it says that failsafe will only work if signal is lost when radio is in PCM mode only, but since my radio is converted to SPEKTRUM 2.4 it must operate in PPM only, is there a way to program failsafe if signal is lost in PPM mode? Thanks!
Hi alishabmao iv recently built a Dji F450 with naza v2 gps , and im having a few problems im using a specktrum dx7s, the trouble i am having is that my quadcopter dosnt seem to want to stay in gps mode i can get it to work sumtimes in the assistant program any ideas of what could be wrong any help would be greatly appreciated
Hi Ali, I recently got a T8J as as you seem to have great success with them. When I got mine the throttle was on a ratchet type spring. I swapped it over and while much smoother still clicks. Is this normal still. I did a quick video on my channel on how to swap them over, but wanted to check with someone that uses the T8J to see if they had the same. Thanks and love the videos. JS
I realize that English is your second language, which is great. However, I wonder if you have been given some incorrect information about the use of the word, "actually." :) That said, these videos helped me a lot, thank you!
Great vídeo! Partner, could you make another video this time showing the key positions on rádio? If you have a 10CH Futaba CAG I really appreciate your help on vídeo! Thank you!
hi. I am using a dji phantom with tarot 2d with futaba 8fg super. Pls help me how to set up the tilt function particularly in programming it with my RC controller. How to program the tilt and remote gain control. i would really appreciate if you can message me with the steps. thank you.
can you tell me if my hobbyzone servos (that came with a foamy plane)and the hobbyzone ESC , would be compatible with a turnigy 9x reciver? thanks
Very well done video, I am just confused a bit trying to apply this to my Futaba 9c with a Frsky module. I can't find the failsafe setting but I think it's because my setup is for PPM?
Ali, great video. I have a 8j Tx on its way and I need to program it for naza gps. You covered everything except IOC, any suggestions on that?
Do you have to have the gps unit to fly the naza system? I am having trouble with mine and I dont have the gps unit!
I have a futaba t14g, witch receiver should I use? I know the 617 only has failsafe on throttle Chanel
As i understand, in the part GPS/Atti/Manuel to failsafe mix, I couldent make the Atti to Failsafe.
it goes to failsafe on GPS and manuel mode but in Atti, mix dont work.
How can i solve this problem ?
Thanks Ali. I correct to assume that T8FG super programming is similar?
Hi, is this set up using the futaba s-buss connection,My dju F550 is using a futaba 8j+8 channel s-buss rx and naza m v2+GPS.
Can you plz help me Sir ..Im building a Y650 using dji naza m lite and a walkera f7 tx and rx having a bunch a problems
hi ali, ive tried to make this with f550 and dji naza m V2 and same t8j controller, but seems not to work, is diff configuration for f550 or for naza v2????
Hello sir what will be gear on my flysky fst6?
Hi, Alishanmao, I am in the process of building a quardcopter using a Hoverfly pro with hoverfly GPS. Alone with that i have a futaba T10J. The question that I would like to educate from you is why would you set the parameter to a Acrobatic not Multirotor?
and could you do a video how to set up futaba T10J. Thank you
Hi Ali,
Great video, is there any chance that you could do one explaining how to set up the Spectrum DX8 radio including the use of IOC please, the Futaba is really different and I ,can't work it out, theres a beer in it for you....
cheers
Hello! Your video is so helpful, thank you for taking the time to make it! I have a question though, I am using a FUTABA 9C concerted to spektrum 2.4, regarding failsafe, in my manual it says that failsafe will only work if signal is lost when radio is in PCM mode only, but since my radio is converted to SPEKTRUM 2.4 it must operate in PPM only, is there a way to program failsafe if signal is lost in PPM mode? Thanks!
Hi alishabmao iv recently built a Dji F450 with naza v2 gps , and im having a few problems im using a specktrum dx7s,
the trouble i am having is that my quadcopter dosnt seem to want to stay in gps mode i can get it to work sumtimes in the assistant program any ideas of what could be wrong any help would be greatly appreciated
Hi Ali, I recently got a T8J as as you seem to have great success with them. When I got mine the throttle was on a ratchet type spring. I swapped it over and while much smoother still clicks. Is this normal still. I did a quick video on my channel on how to swap them over, but wanted to check with someone that uses the T8J to see if they had the same. Thanks and love the videos. JS
hi sir best low price tx & rx hexacoptar using naza
How can I do this on a Turnigy 9xr?
Would you please show how to setup spectrum Dx7s switches and DjI Naza m gps
I realize that English is your second language, which is great. However, I wonder if you have been given some incorrect information about the use of the word, "actually." :) That said, these videos helped me a lot, thank you!
I'm using Futaba 10J and when I set up fail safe on switch B it is running on switch E which is manual,Att,GPS Why is it doing this?
Great vídeo! Partner, could you make another video this time showing the key positions on rádio? If you have a 10CH Futaba CAG I really appreciate your help on vídeo! Thank you!
hi alishanmao, my problem in t8j is that the 50% throttle stick is not 50% in dji naza. 55% throttle in t8j is 50% in naza. i cant trim my throttle.
calibrate the radio with naza
Already tried but stick still isnt in the center (from naza software) after calib
hi. I am using a dji phantom with tarot 2d with futaba 8fg super. Pls help me how to set up the tilt function particularly in programming it with my RC controller. How to program the tilt and remote gain control. i would really appreciate if you can message me with the steps. thank you.
That was awesome
Interesting
can you speak arabic
(0:13) :O