Motorcycle Tank Paintless Dent Removal Bones Dent Repair Port Saint Lucie Florida

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2022
  • Hi and thank you for checking out my video! This is a deeper look into the Paintless dent repair process and how I repair damages to motorcycle gas tanks. Servicing the Treasure Coast of Florida this was done for a client in Port Saint Lucie. I personally Ride a Kawasaki and have had the pleasure of owning 9 motorcycles to date. This gives me a deeper understanding of tanks and other body parts that me need repair. I hope you enjoyed this video and for help with your dent repair visit
    bonesdentrepair.com
    Facebook and Instagram Bonesdentrepair
    Call 772-834-0336
    Jim

ความคิดเห็น • 69

  • @seanaguayo
    @seanaguayo ปีที่แล้ว +2

    This was like watching a master craftsman show us his craft. Very educational an interesting to watch

  • @Kevscancave
    @Kevscancave 8 หลายเดือนก่อน +4

    Beautiful tank👍 You did a great Job👍👀👍

  • @Stevo73660
    @Stevo73660 7 หลายเดือนก่อน +2

    Patience and skill at work. The tank looks great.

  • @alainberthelot2353
    @alainberthelot2353 ปีที่แล้ว +2

    The way you fix a tank is almost the same as me, no many pdr tech want to repair that, but it's always fun to do. Great job.

  • @dentdingking4878
    @dentdingking4878 ปีที่แล้ว +3

    Fabulous video Jim! You killed. it.

  • @dingking7577
    @dingking7577 ปีที่แล้ว +1

    Great repair. The problem solving or puzzles as I call it, is one of my favorite parts of what we do.
    Turned out great!

    • @bonesdentrepair696
      @bonesdentrepair696  ปีที่แล้ว

      Thank you! Yeah this was a fun repair. The problem solving keeps you sharp and the challange is always new!

  • @dolfans413
    @dolfans413 9 หลายเดือนก่อน +4

    Why did you not show the glue pull? The light thing was in the way

    • @bonesdentrepair696
      @bonesdentrepair696  8 หลายเดือนก่อน +1

      Great question. This is most likely due to my crude camera skills. Filming is tough for me as I’m usually hyper focused on the actual task rather then documenting the process. I hope one day to produce better video content. Have a great day 😁🦅

  • @backho12
    @backho12 8 หลายเดือนก่อน +3

    One doesn't learn this sort of skill overnight. Every scenario is different. What an artisan!

    • @bonesdentrepair696
      @bonesdentrepair696  8 หลายเดือนก่อน +1

      Yes you are spot on. I’m entering my 14th year as a auto body professional. Loving every moment. Thank you for the comment

  • @adamcinematic9499
    @adamcinematic9499 ปีที่แล้ว +1

    What a great job man. Very nice format of your new video. Very inspirational. Thank you

    • @bonesdentrepair696
      @bonesdentrepair696  ปีที่แล้ว +1

      Thank you for your comment glad you enjoyed the video!

  • @drdentrepair5530
    @drdentrepair5530 ปีที่แล้ว +1

    This was fantastic! I may copy your idea for the tank stand. that's genius

    • @bonesdentrepair696
      @bonesdentrepair696  ปีที่แล้ว +1

      Thank you! Yes it works great for tanks and is inexpensive

  • @justonovak8216
    @justonovak8216 5 หลายเดือนก่อน +1

    Great job, excellent repair. Thanks for the video.

  • @rustedjunkgarage3316
    @rustedjunkgarage3316 29 วันที่ผ่านมา

    Very nice work, what an awesome color combination on that tank.🫵🏼💯🆒👍

  • @dnebun
    @dnebun ปีที่แล้ว +1

    Nice repair Jim👍, I learned something new, keep up the good work and thank you for sharing 👍🍻

  • @formdog9861
    @formdog9861 10 หลายเดือนก่อน +1

    great job you are very talented amazing how you can fix a dent like that

    • @bonesdentrepair696
      @bonesdentrepair696  10 หลายเดือนก่อน

      Thank you for your comment! 😁🦅

  • @pemj7360
    @pemj7360 2 หลายเดือนก่อน +1

    Would have been a great video had you shown the whole process.

    • @bonesdentrepair696
      @bonesdentrepair696  2 หลายเดือนก่อน

      Yes perhaps a long format video would be good in the future. Have a nice day

  • @kskinn4
    @kskinn4 4 หลายเดือนก่อน +1

    Great job. Took my 900rs tank in a few weeks ago for a ding and he shattered the paint and clear. Only upside is I get to paint it the color of my liking lol

    • @bonesdentrepair696
      @bonesdentrepair696  4 หลายเดือนก่อน

      That is the nature of the beast. Painted metal can be unforgiving. Heat is key to keeping paint flexible. Thanks for watching and your comment

  • @dingking7577
    @dingking7577 ปีที่แล้ว +1

    Hope y’all got through the storm ok. Just realized it went your way.

    • @bonesdentrepair696
      @bonesdentrepair696  ปีที่แล้ว

      Hey we were good through the storm as it hit the opposite coast but friends and family suffered . Thank you for the good wishes though

  • @tekone2k
    @tekone2k 11 หลายเดือนก่อน +3

    Background music is too loud

  • @rockinws6567
    @rockinws6567 2 หลายเดือนก่อน +1

    why do you block what you are doing? can't see what you did?

  • @wvbiker746
    @wvbiker746 7 หลายเดือนก่อน +1

    Like the way you hid how you pulled the dent with the glue tool.

    • @bonesdentrepair696
      @bonesdentrepair696  7 หลายเดือนก่อน +1

      Thanks for the comment as my videos are more of a way to document repair results rather then show all the techniques used. The glue pull process made up the first hour of the repair and the tool work of hammering and pushing was an Additional 3 hours or so. If there was better access points for leverage I would avoid glue as bike paint is thicker leading to paint failure in some cases. This particular dent was located where the vinyl pinstripe was located. This strip is clear coated over and not adhered like paint making this a delicate job. Hope you enjoyed the video and thanks for commenting.
      Jim

    • @robmehner7788
      @robmehner7788 2 หลายเดือนก่อน +1

      Nice job. Many tanks do have a pretty thick gauge steel and that was a long reach. It came out good!

  • @camerongereau2116
    @camerongereau2116 22 วันที่ผ่านมา +1

    very nice my guy

  • @coolnerdsclothing6377
    @coolnerdsclothing6377 หลายเดือนก่อน

    the 2 metal tubes are over flow & breather hose not for fuel lines the fuel line connects to the fuel pump

  • @rm4po4
    @rm4po4 3 หลายเดือนก่อน +1

    I'm confused how metal tap downs and hammers don't chip the paint. How does that work?

    • @bonesdentrepair696
      @bonesdentrepair696  3 หลายเดือนก่อน +1

      Great question. I use very precise amount of pressure when using metal tapdowns. You must clean and polish your hammers and knockdowns to ensure safety of the painted surface. It’s a delicate balance to knockdown smooth with no harm.

    • @rm4po4
      @rm4po4 3 หลายเดือนก่อน

      @@bonesdentrepair696 thank you for the reply!

  • @jamiestanley8774
    @jamiestanley8774 15 วันที่ผ่านมา +1

    How hot is too hot heating with the heater ,will it damage pinstripe or transfers , cheers.

    • @bonesdentrepair696
      @bonesdentrepair696  13 วันที่ผ่านมา

      General temp range to heat paint making it mailable is 150-200 degrees Fahrenheit. You have to use less heat near decals stripes or emblems. Never glue pull on a stripe emblem or decal. Hope that helps
      Jim

    • @jamiestanley8774
      @jamiestanley8774 11 วันที่ผ่านมา

      @@bonesdentrepair696 perfect info . I could have worded it a bit better . But thankyou.

  • @mav8903
    @mav8903 9 หลายเดือนก่อน +1

    I like your canopy set up! I’m gonna have to copy that.
    How much was this repair? I’ve got guys asking me to repair their tanks but haven’t messed with one yet.

    • @bonesdentrepair696
      @bonesdentrepair696  9 หลายเดือนก่อน

      I’d suggest joining the mpdr group on Facebook but I generally price using the Moro matrix on mobile tech Rx. Thanks for the comment 🤘🦅

  • @Weber1987
    @Weber1987 8 หลายเดือนก่อน

    What should a couple half dollar size dents cost to repair at a shop so I know when I go if they are trying to rob me... no creasing or paint damage either on them btw...

    • @bonesdentrepair696
      @bonesdentrepair696  8 หลายเดือนก่อน

      Great question! Most professional companies have adopted a size guid for pricing. General price is 150$ for first inch and 50$ each additional inch. We also add 25-50% for difficulty factors such as aluminum, body line, braces… and so on. Charges for removing trim panels for access also apply. Talking price with no visual context is often misleading. I personally only price in person as it allows me to see all the hidden challenges and make judgment calls as needed. Hope this helps.
      Jim

  • @anonimous2451
    @anonimous2451 ปีที่แล้ว +1

    Oh boy do I have some work for you. I will be in touch when I get into town for the Holidays. Hope we can at least have a conversation.

    • @bonesdentrepair696
      @bonesdentrepair696  ปีที่แล้ว

      Sure thing I look forward to it. Happy holidays

    • @anonimous2451
      @anonimous2451 ปีที่แล้ว +2

      @@bonesdentrepair696 Well the Holiday sure put a wrinkle in things. Hope we can work it out.

  • @robosborne6514
    @robosborne6514 8 หลายเดือนก่อน +1

    Would you know of anyone who does this type of repairing in Australia & in particular South Australia

    • @bonesdentrepair696
      @bonesdentrepair696  8 หลายเดือนก่อน +1

      Hi thank you for the comment. I personally do not k ow anyone in Australia. I’m sure a google search would help find someone. Best of luck
      Jim

  • @KensGarage1
    @KensGarage1 6 หลายเดือนก่อน +1

    Unbelievable how you artists do this. I watched another guy and he used heat (heat gun) stating the paint would crack without. You did not use heat. Clearly your repair came out beautiful but would you normally use or recommend using heat or is it not required? Thanks!

    • @bonesdentrepair696
      @bonesdentrepair696  6 หลายเดือนก่อน

      Great question that was properly answered by the other technician. Heat is used to keep paint flexible to prevent cracking. Depending work conditions and many variables such as type of vehicle,paint material, metal type, depth of damage will determine if I use heat or not. This damage also had a delicate cleared over strip that I was mindful of durning repair process. Every dent is unique and must be accessed properly to ensure the correct approach. Hope this helps.
      Jim

  • @markfranks48
    @markfranks48 16 วันที่ผ่านมา

    Good job very interesting could do without the music

  • @joenoneofyourbusiness6487
    @joenoneofyourbusiness6487 ปีที่แล้ว +1

    The gangster rap is too loud. Why cant you guys use bluegrass or jazz?

    • @bonesdentrepair696
      @bonesdentrepair696  ปีที่แล้ว +1

      Most affordable video editing software has limited music to chose from. I try to pick neutral music with upbeat tempos. Hope you enjoyed the repair work. Thank you for the suggestion

    • @austin625
      @austin625 8 หลายเดือนก่อน +1

      @@bonesdentrepair696great video. I know it takes lots and lots of work to put this together. Hate to be critical but I agree the music is frustrating. Most of the viewers probably want to learn from these DIY videos would rather no music so can fully hear you
      Just my 2cents and really awesome video otherwise

    • @austin625
      @austin625 8 หลายเดือนก่อน

      Well, I guess not so much DIY but I bet most viewers are trying to make it DIY 😀. And when they fail, they can call you.

  • @MAsWorld1
    @MAsWorld1 11 วันที่ผ่านมา

    You hide your your work from us why make the video?

  • @christippins7354
    @christippins7354 8 หลายเดือนก่อน +2

    Talk talk too long abd boring.

    • @bonesdentrepair696
      @bonesdentrepair696  8 หลายเดือนก่อน

      Thank you for the feedback

    • @shin-pad1052
      @shin-pad1052 14 วันที่ผ่านมา

      Great job 👍🏼

    • @ThePerfectSeason1972
      @ThePerfectSeason1972 14 วันที่ผ่านมา

      Nice video, what year is that tank/bike it came off. Thanks for the video