A couple of good tips when removing the bolts place in the new pump so you know the position taken from as different sizes put in old pump once removed. I would also remove the right hand cam Solenoid if you have to tap pump it can sometimes catch the sensor loom and break the sensor connector off costly mistake.
Mine was a different model, but raising it and lowering make access to the pump easier. You have to remove the engine support bracket so you'll need to give it some jack support beneath the sump.
Thanks for sharing this video, you gave me the confidence to replace the water pump on my mokka. Keep up the good work! Paul.
A couple of good tips when removing the bolts place in the new pump so you know the position taken from as different sizes put in old pump once removed. I would also remove the right hand cam
Solenoid if you have to tap pump it can sometimes catch the sensor loom and break the sensor connector off costly mistake.
Thank you for making this video!
great video and camera shots
thanks very much for very detailed video . 👍
Bravo e grazie
Really good video and helpful 👌
Did you use any sealant on the gasket?
Thanks do you need to lower and raise the engine on 1.4 MK1 mokka 👍
Mine was a different model, but raising it and lowering make access to the pump easier. You have to remove the engine support bracket so you'll need to give it some jack support beneath the sump.
Kühlmittelschlauch an Pumpe vergessen!!