Please note that due to the upgrade of the filament detector, you now need to DOWNLOAD AND INSTALL "SPOOL HOLDER V2" and pay attention to the orientation of the filament detector. If you can't watch the video in the reply below this comment, please go to the Shorts to view it. Shorts: th-cam.com/users/shortsjIlbmUsubns The spool holder V2 file: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy
Wait...i didnt realize this video was made by the company that makes these 3d printers... YOU have my respect!! I bought a older fosook 3d printer as my first and honestly i wasnt impressed with it being my 1st ever printer so i seen a review on the adventure 5m and was amazed how beginner friendly it is. So i got it arriving today and today i found this video on the enclosure! Thank you for proving this upgrade stl and video for free!! You have my respect sir! Thank you for being an outstanding company that cares for the customer's!!!
My Flashforge AD5M is on the way to me. This is my first 3d printer, and I'm super excited for it to arrive. I look forward to printing these enclosure panels after it arrives.
Very nice to have Flashforge company support with great videos. I just ordered my AD5M! Please let me know when the enclosure accessories kit is ready for sale!
ordered my 5m a few weeks ago. its amazing. decided to print the enclosure to help with holding in the heat as I was getting some warping on bigger pieces. it took a few days too get everything printed and its all put together. 1. it looks way better now 2. it holds way more heat 3. THIS DRAG CHAIN IS THE MOST REDICULOUS UNUSABLE POS about this build. all it did was kink up and bind in the back corner when needing to print on that corner. I could see it being very helpful without the enclosure because of the risers. I ended up just taking it off and shortening the feed tube about 4 inches. other than that, I'm very happy with the 5M and the enclosure.
Thank you for your feedback! We're glad to hear you're happy with the 5M and the enclosure. Regarding the drag chain, please check if the clips of the drag chain are installed in the right direction
Got my 5m last night and i am very happy with it. I sold my bambu labs x1c because most of the new printers have the same features and since the x1c held its price i sold it for almost the same price i got it for a year later. I didn't expect the 5m to be as good as the x1c due to the price difference, but i gotta say. The first layer goes down 100% perfect every time, unlike my x1c. This machine seems a tiny bit slower, but the quality is amazing.
Thank you so much for sharing your experience! We're thrilled to hear that you're happy with your new 5M. Your feedback is invaluable to us, and we're delighted that the quality of the 5M meets your expectations. If you have any questions or need further assistance, feel free to reach out. Happy printing!❤️️
Absolutely love it! Im just getting into 3D printing and seeing the cool mods and community around the AD5M your trying to grow is fantastic. Any recomendations on panel sizes or settings such as infill density?
Hi, the panel is included in the accessories kit that will be released soon. For settings, please refer to wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy. You can download the 3MF file and open it with orca.
Hi, it is a cool design and I had fun making it. I have one request, can you have 2 options for the top left: no logo and Flashforge (same type face as the bottom).
I am getting a AD5M as a birthday present. This answers a question ive been asking in so many forums, is a DIY enclosurer possible (similar to the overpriced Bambu). Very happy to see this. Also gives me a great first project to work on. When is the accessory kit being released?
I want that enclosure kit right now !!! That is awesome idea too make your printer custom look. 😀 it will be nice if that kit comes with print cooling axillary fan. Also LED lighting kit 👌
I really like the idea of printing the enclosure for a printer myself and appreciate the open nature of the flashforge printers (full klipper etc.). However I would love to see a version that had significantly lower noise levels and proper air filtration.
I hope the hardware kit comes out soon. Have a great New Year! I'm already printing parts on my Ender 3 S1 Pro.... Not my A1 since......... At least I'll have 2 usable printers again, once my 5M gets here tomorrow.
I have an AD5M being delivered tomorrow, and a couple of PETG rolls of filament. Is the mod kit available yet..?? If not, is there a template for the clear acrylic side panels and door..??
Hi, the accessories kit will be released soon. For glass size, please refer to the Acrylic plate size section in wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy
This is such a great project and I'm currently helping a student with it. We're having problems with the hinge being connected when we print it so there's no movement. Any recommendations to fix this?
Hi, already print the part, can you give me the size for top cover, front door plate and side plate. Tq for give us the custom enclosure for this printer, so happy to buy this printer from you guys.😊😊😊
Nice job Flashforge! I just ordered both the M5 and the M5 pro. I currently have a finder 3 along with several creality printers and I have to say that the finder is by far my favorite printer for the quality, speed, and ease of use. I have had several printers over the years and owning a flashforge has always been the "benz" of printers for me. I am looking forward to my M5 and pro. I will be printing the enclosure for the M5 first, any idea of when the kit will be available? If not I am confident that I can precure the pieces needed, but I feel that flashforge provided parts are better.
Hi, you can find it on Amazon:www.amazon.com/FLASHFORGE-Adventurer-Enclosure-Temperature-Filaments/dp/B0D1SRQ54Z/ref=sr_1_1?crid=XCGSPWOXP99R&dib=eyJ2IjoiMSJ9.-8uIvUTnO9abLonvCoXK -5FIv2Gdnl_rAXzj_6NjB_khucDG9MT2P50CaUV-0K1XkgPVNDjE6zPf9R_B9rNHM_1XcyQ5yVoT4ptYP5PI40gqRYXzPgKi3p1B6mJj28EBV0oGxsuRnO8SPBFODl3vgcwEryh7ljPeAofD7y PBFx7Xz-o38vHHJ0xVrND6AByaBubdGnsDCvjAhUPNfqKboplfpBNiUSCFYAKBsprGrgSSe-llH-sjEjAKS1U4OQSCPE4GoelxbJbi8i9qy1tYveSEN6aHtZtHELzzTylOj0Y.J9VoHA0QOEQIaCcINSlBmjW xP1zB8NJ2LX3fUOLg9Sw&dib_tag=se&keywords=flashforge+enclosure+kit&qid=1718536951&sprefix=flashforge+enclosure%2Caps%2C515&sr=8-1
Is there going to be an "extruder top cover" for sale or stl files available to print one for this kit? It's the only thing missing to make this completely DIY.
Hello FlashForge, are you planning to release a kit that allows users to enclose their printers without having to manually print all the walls? I'm quite busy with multiple projects and would appreciate a convenient solution.
Hi, I want to install the fan filters, I noticed that in the rear part the 5M PRO is equipped with a conveyor right above the motherboard, is it possible to have the file to be able to print the same conveyor? Thank you
@@flashforge3d not what I asked for, behind the rear panel inside right above the motherboard in the PRO version there is an air filter recirculation conveyor, I'm looking for that piece.
I didn't know this could be purchased on Amazon and got it on Aliexpress, it didn't come with the new extruder top cover, can I purchase that somewhere separately from the kit?
Hi, you can download the Enclosure for Adventurer 5M 3MF File from here: flashforge.com/a/docs/knowledge-corner/printer-mod-and-diy then you can direct print with one click
Hi I have two other Flashforge printers a Dreamer DX and an Adventurer 3 Pro and just bought the new AD5M. Can I use my current Flashforge software to run this printer?
I am having trouble getting orca slicer to connect to my printer is there any information on how to do that so i can use thank you in advance if there is.
Hi, i printer from your "3mf" file you provided in the Wiki page, but i noticed the parts were printer with supports, since it's first time i deal with "supports", any idea how to remove these supports from the parts?
Hi, you can find it on Amazon:www.amazon.com/FLASHFORGE-Adventurer-Enclosure-Temperature-Filaments/dp/B0D1SRQ54Z/ref=sr_1_1?crid=XCGSPWOXP99R&dib=eyJ2IjoiMSJ9.-8uIvUTnO9abLonvCoXK -5FIv2Gdnl_rAXzj_6NjB_khucDG9MT2P50CaUV-0K1XkgPVNDjE6zPf9R_B9rNHM_1XcyQ5yVoT4ptYP5PI40gqRYXzPgKi3p1B6mJj28EBV0oGxsuRnO8SPBFODl3vgcwEryh7ljPeAofD7y PBFx7Xz-o38vHHJ0xVrND6AByaBubdGnsDCvjAhUPNfqKboplfpBNiUSCFYAKBsprGrgSSe-llH-sjEjAKS1U4OQSCPE4GoelxbJbi8i9qy1tYveSEN6aHtZtHELzzTylOj0Y.J9VoHA0QOEQIaCcINSlBmjW xP1zB8NJ2LX3fUOLg9Sw&dib_tag=se&keywords=flashforge+enclosure+kit&qid=1718536951&sprefix=flashforge+enclosure%2Caps%2C515&sr=8-1
Having an issue hopefully someone can help. So I installed this enclosure and now when I run level program its hits the enclosure on first point in bottom left then at the 5th point on first row then back left with the start of last row. Is there anyway to modify this with like .5mm to 1mm clearance? TIA.
How do I set up the print in Orca Slicer? It just loads the entire project onto a single plate. How do I separate the pieces so I can print them? Very unintuitive
Hi, please download Whole Project: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy and open it in Orca, then these parts are automatically divided into 9 plates for printing.
The filament detector only accepts the filament in one direction. With this mod, you have to insert the filament the opposite direction. How do you over come this?
@@flashforge3d I did check that before posting, but its not clear what I have to do. Seems like I have to print a different spool holder? But the link to download the new holder just takes me to the standard site... Help?
@@flashforge3d I did check it before making my original comment, its not clear what I need to do. The video is confusing, and the link just takes me to wiki. What exactly do I need to do different for my filament sensor to work correct, in the right orientation?
Hi, you'll need to print a new spool holder. You can find the model in the Enclosure for Adventurer 5M section of our Wiki：wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy Just download the whole project, and the file for the new spool holder will be included there.
After printing the new spool holder, you can follow the steps in this video to set it up correctly: th-cam.com/users/shortsjIlbmUsubns This should help you get your filament sensor working in the right orientation. If you have any more questions, feel free to reach out!
Hi, I don't quite remember, but you can try printing or slicing it. The model is available here: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy
Hi, you can find it on Amazon:www.amazon.com/FLASHFORGE-Adventurer-Enclosure-Temperature-Filaments/dp/B0D1SRQ54Z/ref=sr_1_1?crid=XCGSPWOXP99R&dib=eyJ2IjoiMSJ9.-8uIvUTnO9abLonvCoXK -5FIv2Gdnl_rAXzj_6NjB_khucDG9MT2P50CaUV-0K1XkgPVNDjE6zPf9R_B9rNHM_1XcyQ5yVoT4ptYP5PI40gqRYXzPgKi3p1B6mJj28EBV0oGxsuRnO8SPBFODl3vgcwEryh7ljPeAofD7y PBFx7Xz-o38vHHJ0xVrND6AByaBubdGnsDCvjAhUPNfqKboplfpBNiUSCFYAKBsprGrgSSe-llH-sjEjAKS1U4OQSCPE4GoelxbJbi8i9qy1tYveSEN6aHtZtHELzzTylOj0Y.J9VoHA0QOEQIaCcINSlBmjW xP1zB8NJ2LX3fUOLg9Sw&dib_tag=se&keywords=flashforge+enclosure+kit&qid=1718536951&sprefix=flashforge+enclosure%2Caps%2C515&sr=8-1
@@flashforge3d I figured it out, skirt was issue. But while you're here how about you fix the account generation for Orca FF or Flash Maker? You can't get the 'code' you need to generate accounts.
The termination of the cable chain (drag chain) seems to have been way over complicated. Both the 100% DIY approach and the "kit" approach (with a replacement of the top of the hot end) seem unnecessarily complicated. The shoulder screw for additional pivoting at the hot end seems unnecessary, and it seems that the same concept was undertaken by whoever designed the 100% DIY solution as well. A simpler approach of a final chain-link piece with a modified end for rigidly attaching to the hot end should be fine. I am undertaking to design such.
I'm a new customer of your company, and a huge fan of your AD5M printer. I developed an easier, simpler way to connect the cable chain of the DIY enclosure. The design is available free on Printables. th-cam.com/video/A9MNIt4pA_Y/w-d-xo.html
Ни фига оно так не работает! 1 - крепление датчика филамента сделано не верно, датчик перевернут и проволоку так вставить невозможно. 2 - рукав для трубки и проводки упирается в зашивку верхней части. Просто, банально упирается, головка не может доехать в дальний левый угол. Лучше не ставить этот рукав.
Посмотрите, пожалуйста, закрепленный комментарий под этим видео. Если возникнут какие-либо вопросы, свяжитесь с нами по адресу support@flashforge.com. Мы постараемся помочь как можно скорее.
I want add that to my brandnew A5m but i cant read well the measurements for the acrylic plates the sides and door, are the measurements in metric or centimeter?
Please note that due to the upgrade of the filament detector, you now need to DOWNLOAD AND INSTALL "SPOOL HOLDER V2" and pay attention to the orientation of the filament detector. If you can't watch the video in the reply below this comment, please go to the Shorts to view it. Shorts: th-cam.com/users/shortsjIlbmUsubns The spool holder V2 file: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy
New Filament Holder for AD5M
Thank you! This is very cool and this is my first 3D printer. I'm glad I chose your company, seeing that you do such things for your customers.
Glad you like it!
Wait...i didnt realize this video was made by the company that makes these 3d printers... YOU have my respect!! I bought a older fosook 3d printer as my first and honestly i wasnt impressed with it being my 1st ever printer so i seen a review on the adventure 5m and was amazed how beginner friendly it is. So i got it arriving today and today i found this video on the enclosure! Thank you for proving this upgrade stl and video for free!! You have my respect sir! Thank you for being an outstanding company that cares for the customer's!!!
Very cool! Super economical way to get a fast enclosed printer right now.
My Flashforge AD5M is on the way to me. This is my first 3d printer, and I'm super excited for it to arrive. I look forward to printing these enclosure panels after it arrives.
Hope you enjoy it!
Very nice to have Flashforge company support with great videos. I just ordered my AD5M! Please let me know when the enclosure accessories kit is ready for sale!
Hi, we'll let you know when the kit is ready for sale.
ordered my 5m a few weeks ago. its amazing. decided to print the enclosure to help with holding in the heat as I was getting some warping on bigger pieces. it took a few days too get everything printed and its all put together. 1. it looks way better now 2. it holds way more heat 3. THIS DRAG CHAIN IS THE MOST REDICULOUS UNUSABLE POS about this build. all it did was kink up and bind in the back corner when needing to print on that corner. I could see it being very helpful without the enclosure because of the risers. I ended up just taking it off and shortening the feed tube about 4 inches. other than that, I'm very happy with the 5M and the enclosure.
Thank you for your feedback! We're glad to hear you're happy with the 5M and the enclosure. Regarding the drag chain, please check if the clips of the drag chain are installed in the right direction
Really like it, just ordered the FF AD5M and will go forward with this enhancement.
Got my 5m last night and i am very happy with it. I sold my bambu labs x1c because most of the new printers have the same features and since the x1c held its price i sold it for almost the same price i got it for a year later. I didn't expect the 5m to be as good as the x1c due to the price difference, but i gotta say. The first layer goes down 100% perfect every time, unlike my x1c. This machine seems a tiny bit slower, but the quality is amazing.
Thank you so much for sharing your experience! We're thrilled to hear that you're happy with your new 5M. Your feedback is invaluable to us, and we're delighted that the quality of the 5M meets your expectations. If you have any questions or need further assistance, feel free to reach out. Happy printing!❤️️
Truely, this Enclosure looks better than the AD5M Pro enclosure. Very cool design. Thanks for sharing!
Glad you like it!
Absolutely love it! Im just getting into 3D printing and seeing the cool mods and community around the AD5M your trying to grow is fantastic. Any recomendations on panel sizes or settings such as infill density?
Hi, the panel is included in the accessories kit that will be released soon. For settings, please refer to wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy. You can download the 3MF file and open it with orca.
Hi, it is a cool design and I had fun making it. I have one request, can you have 2 options for the top left: no logo and Flashforge (same type face as the bottom).
Yes, we have. Please download step file wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy
I am getting a AD5M as a birthday present. This answers a question ive been asking in so many forums, is a DIY enclosurer possible (similar to the overpriced Bambu).
Very happy to see this. Also gives me a great first project to work on.
When is the accessory kit being released?
Hi, the accessory kit will be available in flashforgeshop.com soon, please stay tuned.
I want that enclosure kit right now !!! That is awesome idea too make your printer custom look. 😀 it will be nice if that kit comes with print cooling axillary fan. Also LED lighting kit 👌
Thank you for your suggestion, let’s look forward to it together
I really like the idea of printing the enclosure for a printer myself and appreciate the open nature of the flashforge printers (full klipper etc.). However I would love to see a version that had significantly lower noise levels and proper air filtration.
Thank you for your feedback. Your opinion is very important to us. I have already reported it to relevant colleagues.
Hi! I love the concept, will there be be an estimated time of release?
Hi, the accessories kit will be released soon. For the model, please refer to wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy.
I hope the hardware kit comes out soon. Have a great New Year!
I'm already printing parts on my Ender 3 S1 Pro.... Not my A1 since......... At least I'll have 2 usable printers again, once my 5M gets here tomorrow.
Hope you like it.
I have an AD5M being delivered tomorrow, and a couple of PETG rolls of filament. Is the mod kit available yet..?? If not, is there a template for the clear acrylic side panels and door..??
Hi, the accessories kit will be released soon. wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy.
Awesome but where did you get and what size are the glass windows?
Hi, the accessories kit will be released soon. For glass size, please refer to the Acrylic plate size section in wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy
Awesome I've already printed the top section. 😊❤
Wonderful!
The enclosure printed out fantastically and works great. 😊
This is such a great project and I'm currently helping a student with it. We're having problems with the hinge being connected when we print it so there's no movement. Any recommendations to fix this?
Hi, you can adjust the elephant foot compensation. If petg doesn't work, please change to pla.
Hi where do I get the plastic window from? also the Shielding Plate part is too large for the print bed
Hi, the enclosure accessory kit will be available in flashforgeshop.com soon, please stay tuned.
I see you also have the camera for sale once I make the enclosure I want to get the camera can you make a video showing how to install that?
Yes, we'll publish the video soon
Hi, please check the video: th-cam.com/video/D4CfAO1ya9Q/w-d-xo.html
@@flashforge3d awesome just watched it thank you guys so much amazing company and support thank you!!
Hi, already print the part, can you give me the size for top cover, front door plate and side plate. Tq for give us the custom enclosure for this printer, so happy to buy this printer from you guys.😊😊😊
Hi, please check here; wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy, then click Download the Dimensions for Acrylic Plates
Nice job Flashforge! I just ordered both the M5 and the M5 pro. I currently have a finder 3 along with several creality printers and I have to say that the finder is by far my favorite printer for the quality, speed, and ease of use. I have had several printers over the years and owning a flashforge has always been the "benz" of printers for me. I am looking forward to my M5 and pro. I will be printing the enclosure for the M5 first, any idea of when the kit will be available? If not I am confident that I can precure the pieces needed, but I feel that flashforge provided parts are better.
Thank you for your support. The kit will be available soon, please stay tuned!
how do I purchase the enclosure kit for my AD5? Loving the printer so far!
Hi, the accessories kit will be released soon. Please stay tuned!
WHEN? @@flashforge3d
@@richkleyn Hi, the kit will be released around the end of March and April.
@flashforge there is nowhere to attach the shoulder screw on the extruder assembly 05:46
Hi, after the kit is released, there will be the top cover
and where can I buy a drag-chain for a cable or take a model for printing?
Hi, the drag-chain is included in the accessories kit that will be released soon.
Will this kit ever be sold? It's been a long time since you guys advertised it.
Hi, you can find it on Amazon:www.amazon.com/FLASHFORGE-Adventurer-Enclosure-Temperature-Filaments/dp/B0D1SRQ54Z/ref=sr_1_1?crid=XCGSPWOXP99R&dib=eyJ2IjoiMSJ9.-8uIvUTnO9abLonvCoXK -5FIv2Gdnl_rAXzj_6NjB_khucDG9MT2P50CaUV-0K1XkgPVNDjE6zPf9R_B9rNHM_1XcyQ5yVoT4ptYP5PI40gqRYXzPgKi3p1B6mJj28EBV0oGxsuRnO8SPBFODl3vgcwEryh7ljPeAofD7y PBFx7Xz-o38vHHJ0xVrND6AByaBubdGnsDCvjAhUPNfqKboplfpBNiUSCFYAKBsprGrgSSe-llH-sjEjAKS1U4OQSCPE4GoelxbJbi8i9qy1tYveSEN6aHtZtHELzzTylOj0Y.J9VoHA0QOEQIaCcINSlBmjW xP1zB8NJ2LX3fUOLg9Sw&dib_tag=se&keywords=flashforge+enclosure+kit&qid=1718536951&sprefix=flashforge+enclosure%2Caps%2C515&sr=8-1
Is there any chance of a larger 5m coming? The 5m is amazing. Please do at 280 xx280 or better yet a 300x300
Please stay tuned!
@@flashforge3d any idea of a timeframe? Im close to buying a qidi machine….
About Q4
cool first project! Thank you !
Is there going to be an "extruder top cover" for sale or stl files available to print one for this kit? It's the only thing missing to make this completely DIY.
Hi, the kit includes extruder top cover.
Hello dose the camera wire still fit in when the diy mod new place for the led screen will fit
Yes, the camera can still be installed
Can you make a tutorial on how to print the parts via FlashPrint? FlashPrint is so much easier to use than Orca.
Hi, you can download the 3mf file and print it directly, which is very convenient
Hello FlashForge, are you planning to release a kit that allows users to enclose their printers without having to manually print all the walls? I'm quite busy with multiple projects and would appreciate a convenient solution.
Thank you very much for your suggestion. Your opinion is very important to us. I have already reported it to relevant colleagues.
With this mod, does the internal/external changing of air recycling work or can be made to work, like with the pro ?
Hi, it can't be done. It doesn't work like the pro.
Do we know exactly when the enclosure pack will be released?
About the end of April
Hi, I want to install the fan filters, I noticed that in the rear part the 5M PRO is equipped with a conveyor right above the motherboard, is it possible to have the file to be able to print the same conveyor? Thank you
Hi, please check here: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy You can download the Drag chain kit for Flashforge Adventurer 5m
@@flashforge3d not what I asked for, behind the rear panel inside right above the motherboard in the PRO version there is an air filter recirculation conveyor, I'm looking for that piece.
Hi, we don't have this file yet
I didn't know this could be purchased on Amazon and got it on Aliexpress, it didn't come with the new extruder top cover, can I purchase that somewhere separately from the kit?
Hello, our kits are sold as a complete package.
Please tell me with what filling to print the top 4 brackets? When filling out 100%, printing will take 19 hours
Hi, you can download the Enclosure for Adventurer 5M 3MF File from here: flashforge.com/a/docs/knowledge-corner/printer-mod-and-diy then you can direct print with one click
Excellent , merci beaucoup 👍
Hi I have two other Flashforge printers a Dreamer DX and an Adventurer 3 Pro and just bought the new AD5M. Can I use my current Flashforge software to run this printer?
Yes, you can use Flashprint
I'm impressed!
Will the kit coming to your shop just enclose the doors?
Yes, please stay tuned!
Is there going to be a air filter like pro able as well ?
Hi, AD5M does not have the air filter.
I saw that it's recommended to use the petg but I don't see pink or mint green as a color option. Can you use pla?
You can use other colors
What material should I use to print the enclosure?
Hi, it is recommended to use PETG for printing, PLA is ok.
How can i use the camera with the enclosure?
Hi, please contact support@flashforge.com
Do all these screws come with the printer or the enclosure pack?
Yes, they are included in the accessories kit that will be released soon.
@@flashforge3d ok thank you
I am having trouble getting orca slicer to connect to my printer is there any information on how to do that so i can use thank you in advance if there is.
Hi, please contact support@flashforge.com
Wich material os mor addecuate for each part ??
PETG. Please check and Download Whole Project: ad5m-enclosure_for_3d_printing_20240710.zip : flashforge.com/a/docs/knowledge-corner/printer-mod-and-diy
While slicing the STL files, I noticed the Shielding plate wouldn’t fit, is there an angle I can insert to make it fit?
Hi, please download One-click-printing 3MF File: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy You can print directly.
Hi, i printer from your "3mf" file you provided in the Wiki page, but i noticed the parts were printer with supports, since it's first time i deal with "supports", any idea how to remove these supports from the parts?
Hi, you can remove the supports with your hands. If you find it difficult, you can use tools like pliers to help remove them more easily.
where do you get the panels?
Hi, the panel is included in the accessories kit that will be released soon.
When will this be available?
It will be available soon, please stay tuned!
That's a lot of filament and time.
Is there an upgrade KIT just for these parts?
Thank you for your suggestion. Your opinion is very important to us. I have already reported it to relevant colleagues.
That is very kind 😊
Thank you!
What kind of temps can it hold? 60c?
Hi, are you referring to the temperature of the build plate?
@@flashforge3d ambient temperature, with the enclosure, same reason it can print ASA after being enclosed right?
Yes, it can print ASA
Where do we get the hardware for this? I looked on your website for a kit for hardware I can order but I didnt see anything
Hi, please contact support@flashforge.com
@@flashforge3d Thanks for reply I already order everything off amazon. Awesome print btw you guys at flashforge did an amazing job
With what screw on what price I’m trying to build mine and I cant
Hi, here is the enclosure kit: flashforge.com/products/ad5m-kit?_pos=1&_psq=enclosure+kit&_ss=e&_v=1.0
I thought it was supposed to release in april?
Hi, you can find it on Amazon:www.amazon.com/FLASHFORGE-Adventurer-Enclosure-Temperature-Filaments/dp/B0D1SRQ54Z/ref=sr_1_1?crid=XCGSPWOXP99R&dib=eyJ2IjoiMSJ9.-8uIvUTnO9abLonvCoXK -5FIv2Gdnl_rAXzj_6NjB_khucDG9MT2P50CaUV-0K1XkgPVNDjE6zPf9R_B9rNHM_1XcyQ5yVoT4ptYP5PI40gqRYXzPgKi3p1B6mJj28EBV0oGxsuRnO8SPBFODl3vgcwEryh7ljPeAofD7y PBFx7Xz-o38vHHJ0xVrND6AByaBubdGnsDCvjAhUPNfqKboplfpBNiUSCFYAKBsprGrgSSe-llH-sjEjAKS1U4OQSCPE4GoelxbJbi8i9qy1tYveSEN6aHtZtHELzzTylOj0Y.J9VoHA0QOEQIaCcINSlBmjW xP1zB8NJ2LX3fUOLg9Sw&dib_tag=se&keywords=flashforge+enclosure+kit&qid=1718536951&sprefix=flashforge+enclosure%2Caps%2C515&sr=8-1
The link for the parts to print not working.. where can i download the files ?
Hi, please check here：flashforge.com/a/docs/knowledge-corner/printer-mod-and-diy#enclosure-for-adventurer-5m
Having an issue hopefully someone can help. So I installed this enclosure and now when I run level program its hits the enclosure on first point in bottom left then at the 5th point on first row then back left with the start of last row. Is there anyway to modify this with like .5mm to 1mm clearance? TIA.
Hi, please contact support@flashforge.com
How do I set up the print in Orca Slicer? It just loads the entire project onto a single plate. How do I separate the pieces so I can print them? Very unintuitive
Hi, please download Whole Project: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy and open it in Orca, then these parts are automatically divided into 9 plates for printing.
The filament detector only accepts the filament in one direction. With this mod, you have to insert the filament the opposite direction.
How do you over come this?
Hi, please check the pinned comment
@@flashforge3d I did check that before posting, but its not clear what I have to do. Seems like I have to print a different spool holder? But the link to download the new holder just takes me to the standard site... Help?
@@flashforge3d I did check it before making my original comment, its not clear what I need to do. The video is confusing, and the link just takes me to wiki. What exactly do I need to do different for my filament sensor to work correct, in the right orientation?
Hi, you'll need to print a new spool holder. You can find the model in the Enclosure for Adventurer 5M section of our Wiki：wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy Just download the whole project, and the file for the new spool holder will be included there.
After printing the new spool holder, you can follow the steps in this video to set it up correctly: th-cam.com/users/shortsjIlbmUsubns This should help you get your filament sensor working in the right orientation. If you have any more questions, feel free to reach out!
how do I get the new Extruder Top Cover for this DIY?
Hi, the cover is included in the accessories kit that will be released soon.
Can anyone advise on how much PETG is needed? Thank you
Hi, I don't quite remember, but you can try printing or slicing it. The model is available here: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy
@@flashforge3d thank you very much
You're welcome!❤️️
where do we get the plexi?
Hi, you can find it on Amazon:www.amazon.com/FLASHFORGE-Adventurer-Enclosure-Temperature-Filaments/dp/B0D1SRQ54Z/ref=sr_1_1?crid=XCGSPWOXP99R&dib=eyJ2IjoiMSJ9.-8uIvUTnO9abLonvCoXK -5FIv2Gdnl_rAXzj_6NjB_khucDG9MT2P50CaUV-0K1XkgPVNDjE6zPf9R_B9rNHM_1XcyQ5yVoT4ptYP5PI40gqRYXzPgKi3p1B6mJj28EBV0oGxsuRnO8SPBFODl3vgcwEryh7ljPeAofD7y PBFx7Xz-o38vHHJ0xVrND6AByaBubdGnsDCvjAhUPNfqKboplfpBNiUSCFYAKBsprGrgSSe-llH-sjEjAKS1U4OQSCPE4GoelxbJbi8i9qy1tYveSEN6aHtZtHELzzTylOj0Y.J9VoHA0QOEQIaCcINSlBmjW xP1zB8NJ2LX3fUOLg9Sw&dib_tag=se&keywords=flashforge+enclosure+kit&qid=1718536951&sprefix=flashforge+enclosure%2Caps%2C515&sr=8-1
Can you print ABS without having the external fans?
Yes, ventilation is required after printing is completed.
I can't get the spool holder to slice, it won't fit on the plate?
Adventurer 5m
Hi, please contact support@flashforge.com
@@flashforge3d I figured it out, skirt was issue.
But while you're here how about you fix the account generation for Orca FF or Flash Maker? You can't get the 'code' you need to generate accounts.
Thank you for your feedback. We have passed it on to the relevant team members.
Great!
Is this an open source design?
Yes, you can download file here: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy.
What slicer software is that?
orca
@@flashforge3d thank you, that's cool to see Flashforge using Orca. Do you guys have a configuration bundle for the ADV4 so it can use Orca?
Hi, we don't have
None of the links work, I just get taken to page that does "})". So I cant make anything.
Hi, please check here：flashforge.com/a/docs/knowledge-corner/printer-mod-and-diy#enclosure-for-adventurer-5m
Anyone know the second song??
Blue Ribbons
How many kg is used for this?
Sorry, I forgot. You can try slicing it: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy
I used pla
The termination of the cable chain (drag chain) seems to have been way over complicated. Both the 100% DIY approach and the "kit" approach (with a replacement of the top of the hot end) seem unnecessarily complicated. The shoulder screw for additional pivoting at the hot end seems unnecessary, and it seems that the same concept was undertaken by whoever designed the 100% DIY solution as well. A simpler approach of a final chain-link piece with a modified end for rigidly attaching to the hot end should be fine. I am undertaking to design such.
That's great. Looking forward to your design.😊
I'm a new customer of your company, and a huge fan of your AD5M printer. I developed an easier, simpler way to connect the cable chain of the DIY enclosure. The design is available free on Printables.
th-cam.com/video/A9MNIt4pA_Y/w-d-xo.html
That's cool
Ни фига оно так не работает! 1 - крепление датчика филамента сделано не верно, датчик перевернут и проволоку так вставить невозможно. 2 - рукав для трубки и проводки упирается в зашивку верхней части. Просто, банально упирается, головка не может доехать в дальний левый угол. Лучше не ставить этот рукав.
Посмотрите, пожалуйста, закрепленный комментарий под этим видео. Если возникнут какие-либо вопросы, свяжитесь с нами по адресу support@flashforge.com. Мы постараемся помочь как можно скорее.
I want add that to my brandnew A5m but i cant read well the measurements for the acrylic plates the sides and door, are the measurements in metric or centimeter?
millimeter
Where do I get the file to print the mod from?
Hi, please check here：flashforge.com/a/docs/knowledge-corner/printer-mod-and-diy#enclosure-for-adventurer-5m
Where do you get the accessories?
Hi, the accessories will be released soon, please stay tuned!