How Do I Tell If I Have a Bad Front Wheel Bearing Hub Assembly?
ฝัง
- เผยแพร่เมื่อ 5 พ.ย. 2010
- For More Info visit us at: 1aau.to/h/xy/
1A Auto shows you how to tell if the front wheel bearing hub assembly is bad on your car.
🔧 List of tools used:
• Floor Jack 1aau.to/odC/1AXAA00068
• Jack Stands 1aau.to/odh/1AXAA00065
Subscribe: / @1aauto
Check out our playlist:
Driveway Diagnostics!: • Driveway Diagnostics!
Tips & Secrets only Mechanics Know: • Tips & Secrets only Me...
Ford Taurus 2000-2007: • Ford Taurus 2000-2007
Wheel Hubs & Bearings: • Wheel Hubs & Bearings
For More Info visit us at 1aau.to/h/xy/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You may be able to diagnose a bad bearing that way too. Just make sure that it's not the brakes making the noise. Thank you for visiting us on TH-cam. Have a great day! 1aauto.com 888-844-3393
We carry them for all kinds of vehicles on our website 1aauto.com 888-844-3393
If the hub isn't moving then is sounds like it's frozen. We carry new ones on our website 1aauto.com 888-844-3393 FREE SHIPPING in the lower 48 states.
It depends what type of vehicle it's for. Our toll free sales number is 888-844-3393 our sales staff can help you out. Have a great day.
It may be a worn hub bearing. We carry new ones on our website 1aauto.com with free shipping. 1aauto.com 888-844-3393
It could be that or you may also want to check the ball joints and all of the other suspension pieces. 1aauto.com 888-844-3393
If there's a check engine light on you may want to have the code pulled to see where it's pointing to. You could also check all of the suspention pieces to see if there's anything that needs to be fixed.
@ant1h If the inside of the rim is worn, I would also check the brake caliper to see if it has the same type of mark on it. You could also jack the tire up and turn it by hand to see if you can hear where it's comeing from. Hope this helps you out.
yes mike it did help me out thank you for this video I have learned so much from you and your other team members with all of your videos
+JOE FORD DIY Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@DodgeMan360 Once you put the new tie rod in, I would recommend getting an alignment done. Even if you count the turns it may still be off a little bit, causing the tires to wear out.
Yes..that would make sense. Probably a good time to ask the mechanic if they see anything wrong in the suspension system .
Knowing what a ball joint is and what time rods do. What's their function and how to see if they are worn is very inp. That could be any part. As I am not a mechanic but like to be able to do things myself. I have piano/guitar site on You tube..it aimed towards beginners and intermediates. Pianostyle100.
@infringinator They can actually come apart and break if you let them go to long. We sell the bearings on our website 1aauto.com
@Amopower you can look at the hub bearing to see if there's any movement in it.
this guy in these 1A auto videos has literally turned me in to a junior mechanic.thank you my friend.more videos.
Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393
@llGrandAmGtll It could be that a wheel bearing has gone bad. We carry them on our website. Here's a link to them. Hope this helps you out. 1aauto.com/1A/wheel-bearing-hub-front/Pontiac/GrandAm/-/-/2002?ATony
@wickedjester9 I would check all of the suspension pieces such as the tie rod ends and sway bar links, ball joints. You should also see if there's any play in the axle shafts. If you have a bad one, that could cause an issue too.
@Amopower the procedure would be the same to check the bearings in the front of your vehicle.
these videos are great!. helpfull to a guy on a fixed income. shows me how to do some of the work myself. thanks again.
It may be. Sometimes a bad hub noise will come and go while you turn.
@antonio30824 You have to lift the tire up off the ground and unload it,to properly be able to move it as shown in the video. What you are looking for is play in the wheel by being able to move it from side to side.
the guys at 1a make the jobs look easy and they show you step by step thanks guys for your time.
+Steve Gastearl Thanks for the kind words. 1aauto.com?TH-cam&CTA%20Comment&ATony 866-403-3393
Thanks for your time
You may experiance a humming noise at over 30 mph, if the bearing has gone bad.
It could also be worn suspension or steering parts. If the sway bar steering stabilizers are bad, you experience a thumping noise with a shake in the wheel at higher speeds, but not necessarily a shake in the brake pedal. Hope this helps you out.
It still could be a bad wheel bearing. Sometimes on these newer cars you have to take the hub off of the knuckle and see if you can move the outer hub by hand. If there's quite a bite of play between the two pieces it may be bad. The bearing tolerances are so close on some of the newer cars, that it can be hard to tell at times. Hope this helps you out.
@12unnn It could be in the driveline too.
Good short, sharp smack of information like a 308 hitting you.
You may want to check the front axles and also the sway bar end links for wear. If the end links are dried out and bad, you may have a thump at higher speeds, shake in the steering wheel, but maybe not in the brake pedal. If those check out okay, inspect the rest of the suspension pieces for wear. Hope this helps you out. 1aauto.com
Thanks,the video was a big help. I feel alot more confident doing this now.
Thank you for watching! Please call our sales staff they will be able to assist you . The number is 888-844-3393 thanks!
1aauto.com?TH-cam&CTA%20Comment&ATony
when the vehicle is up in the air and since there is no limited slip differential, one side of the vehicle will spin since the power is being diverted all to that side since it believes it is slipping. When the vehicle is on the ground and the wheel is getting traction, the power then goes to both tires.
It could either be from the tires or it could be a bearing going bad. Bringing the car in to have it looked at will be the best thing to do at this point.
Thanks guy, nice quick reference. :)
You may want to take a look at the suspension pieces for anything that may be bent.
@Dolfandad79 Just an FYI, the car in this video is "too bad." It is a good example to video because you can see it. Better to catch it before it can move this much.
You may want to jack the car up and see if the wheel bearings are bad. You could also see if the axle is loose. You may want to turn the tire by hand to see if you can hear any strainge noises that may lead you to what's causing the issue.
It may be a bad wheel bearing. 1aauto.com 888-844-3393
what where the symptoms while driving
I have a 2005 ford sport trac 4 wheel drive the front passenger rotor was warped and was changed but it still sounds like it rubs but not the whole way as the wheel rotates it gives off a shuddering type sound and is more prominent when turning right and at higher speeds also at highway speeds the steering wheel shakes a bit but the brake doesn't pulse or vibrate when stopping
If you also feel the shake in the brake pedal, usually it's the sign of a bad rotor. We carry new brake rotor and pad kits on our website for all kinds of vehicle. Hope this helps you out.
Can u explain,what type of shake in the brake pedal you mean?. My brakes have gotten bit soft and sometimes i feel motion in the pedal like the pads are slipping and not "locking"/grabbing hos they should
muy buenos los videos
I have a whoop whoop noise on the front driver side of my 07 silverado. It only makes this noise if the trucks been sitting awhile.
nice short informative video
Nice info.
I didn't see the boot move though.
You guys are awesome thank you
+Fubar Snafu Thanks for watching. 1aauto.com
Hey a1auto I was wondering if this problem with the wheel hub bearing goin bad could be the cause of my cv shaft axle constantly being needed to replaced at least once a year? I know that the sensor on the wheel huh does work and does not make any sounds during driving.
A bad wheel bearing will make more of a humming noise where a bad U-joint may tend to have more of a vibration along with a humming noise to it.
2005 sport trac 4 wheel drive front passenger side sounds like it runs or hums louder when turning rotor was replaced recently was warped no signs of it warping now no vibrations in pedal when stopping louder humm however steering wheel vibrates at highway speed and humm is louder
Would that cause inner tire wear? I replaced all my suspension , shocks and got an alignment, but still have wear on the inner driver tire. But I did replaced the wheel hub up "after" the alignment so would that cause that wear ?
thanks for your videos
+Ricardo Alberto Gonzalez Ramirez No problem. Thank you for watching. 1aauto.com?TH-cam&CTA%20Comment&ATony 866-403-3393
Time to check my truck out tomorrow
Hello. I wonder why some torque speciffications are like 85 Nm + x degree and not just Newton meters.
Thanks, subscribed :)
I like these types of videos, things to look for on our own before they get too bad. Keep up the good work guys!
Ever since they changed the hub on my driver side, I have this irritating banging noise it sounds as if something hitting on my wheels but every time I have someone look at it they say they can’t see anything wrong. And when I make a left turn there is a definite wobble. I don’t feel safe driving it with the banging on the wheel and wobble in left turns.
Thanks for your videos very helpful.
I have a 03 grand Cherokee limited that has started to make a whining sound that seems to be coming from the drivers side front. It doesn't happen all the time but becoming more frequent and only makes noise when moving. Its higher pitched than wheel bearings that I have heard in the past when going bad. Been reading jeep forums lot of people with this problem but no solution. some say wheel bearings some say pinon bearings. any help would be thankful.
HI, I actually have 4 Grand Cherokees in the family. Three of them are 99-04 WJs. Usually when the wheel bearings fail you'll hear a high pitched whine (all of mine did it at around 30MPH). You may also experience front tire wear on the outer edge of the tires. Here's a video we did on my 2004. How To Install Replace Front Wheel Hub Bearing Jeep Grand Cherokee 99-04 PART 2 1AAuto.com We carry new wheel bearings on our website. Here's a link to them for you 2003 if they need to be replaced. Hope this helps you out. www.1aauto.com/1A/front-wheel-bearings-and-hubs/Jeep/GrandCherokee/-/-/2003?VideoReply&TH-cam&ATony
If this is an all wheel drive mountaineer, this may be caused by the clutches in the rear differential. This is a common problem in those and there is a technical bulletin about it.
I need hub and bearings assembly for 1.8, 2006 Nissan Sentra front passenger side.do you have?
Thank you!
Thanks for checking us out. 1aauto.com +Alejandro Roal
I like the people who come in wanting a aliment knowing good and damn well they got suspension problems and know that we’re going can’t do it until they have it fixed
+Jacob Stacy Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
What about rear tires without tie rods and ball joints ?
So, I have a 2014 dodge gran caravan and a 2004 ford f150, and whenever we go over 65 mph, the tire starts to shake and sometimes it shakes the whole vehicle(the truck shakes violently when going over 65 mph) , is that what could be causing the problem?
Hello. What's the difference between a wheel hub and a U-joint? Do they make kind of the same noise? Makes a noise on and off gas at about 60 and when turning a little to the left at speed. Any advice would be greatly appreciated.
@DodgeMan360 If the tie rod is making noise while you move the tires, then it should be replaced.
@wickedjester9 if its manual it could be the clutch or a driveshaft / gearbox bearing if not any of the suspension
I get this droning noise from the driver side front wheel at about 65-70 MPH, when the ride also becomes a bit rough and a noticeable bit of shimmy on the steering wheel becomes apparent. I'm suspecting a bad bearing, am I on the right track?
I have a 2008 Chevy Malibu. Just the other day I started hearing a humming like sound on the driver's side, specifically more around curves. However, I was told I need new tires soon. It has 80K miles. Any ideas what it could be?
I have a 96 Sable - when I'm driving there is an almost chirping/slight squeal coming from my driver's front wheel - I'm thinking its the bearings - there's no movement on the hub at all. What do you think? Thanks!
Thanks for the reply. I had recently done my front strut assemblies. So i thought it was maybe loose bolts somewhere.in the suspension. So took the wheel off. Spun the wheel hub. And traced my clicking/ tapping noise to a badly cracked front differential. The fluid had leaked out completely. So im now looking for a front differential.
You right bro
I have been told the front differencial is bad in my 05 Envoy SLT 4 wheel drive 4 cyl. I am thinking it is a left hub bearing. If I am driving the vehicle in 2 wheel drive and the differencial is not "engaged", I wouldn't hear the "vibration" sound, correct? Because I am using the rear differencial with 2 wheel drive. It is definately a rough vibration "feeling" in the front (Left side if I had to guess) I hear the sound in 2 and 4 wheel drive. Whats your thoughts?
Usually when a wheel bearing goes bad you'll hear a humming noise. You may want to check the wheel bearings and also the steering components in the front. Hope this helps you out. 1aauto.com 888-844-3393
I have the issue with the tire moving at 3 o clock and 6... The tirods are fine (I just changed the inner) yesterday the outer was replaced like a month ago... There is a shaking when i get up till about 70 I'm not really sure what it could be besides the hub
I have a 2000 Pontiac Grand Am and I'm thinking that my axle might be messed up everytime I turn the steering wheel to the right when I'm going around 60 miles per hour it does make a shaking sound and at the end of the axle the part that goes in the transmission have a little leak can you explain to me what it could be and thank you I appreciate your time
I have this kind of play when I hold the tyre side to side. The ball joint and tie rod end are ok. Any ideas? No humming noise, no clicking on turns. Car only clicks when hits a bump.
I have a 2002 ford focus and i hear a humming noise when i drive i think its a bad wheel bearing but when i jack it up there is no movement in any of the wheels. Any ideas on whats wrong with it.
ok so my question is I have a 2005 cavalier and I have a constant loud humming noise coming from my front passenger side... I have taken the wheel off and checked as suggested but there is no clunking sound in my hub.... also there is no pulling in my steering when driving... however, when im driving and a left bend in the road comes up the noise go's away?? I've been told it could be my wheel bearing but i've also been told it could be my cv shaft? any ideas on what this problem could be?
@BFMVdrummer Yes it may, or it could also make a houling noise.
So side to side wiggle means a tie rod right? Ive gotta 08' ram that has a wiggle from side to side, and the tie rod is moving slightly, makes a clunk noise. Everything else is tight,
@Amopower If the ball joint ins't moving it's probably the hub
Will my Durango make a grinding noise if I have a bad bearing?
can you tell by spinning the wheel when its off the ground? i did that and made a noise so i think its a bad wheel bearing
Off topic if I may.
Do you have anything on how to replace a sunroof?
We currently do not.
Clicking sound when i turn right. honda accord ex 1995. help please!?
There is a clicking sound when I accelerate in a turn. but i just changed the axle CV joints on the right but still making the clicking sound when i turn right
Very informative video guys! Straight to the point, and concise!
Thanks for watching. We're glad you liked it. 1aauto.com?TH-cam&CTA%20Comment&ATony 866-403-3393
Ok thanks again sorry about so many comments it wasn't working right and ended up posting them all
Thank you for sharing your expertise and what I should look for. I had a simple oil change and was told that my front wheel bearings need to be replaced, 04 Toyota 4 Runner, SR5, 4WD. The mechanic demonstrated the same condition above, a slight looseness/movement on both front wheels. I don't hear any noise when driving. Their quote is $1150.00. Then he said that I'll probably need an alignment after the work is complete. They said their quote is high because of the 4 wheel drive and labor intensive, minimum 6 hours ?? I will get additional quotes, including the toyota dealership. If this repair work is this intensive, I would feel more comfortable with the dealership doing the work. Does this quote seem a little inflated?
It shouldn't be that bad of a job, we currently do not have an auto repair video on this particular truck. Most trucks can be done (replacing both) in a couple of hours. We carry new front wheel bearings for your Toyota. Here's a link to them on our website. Hope this helps you out. www.1aauto.com/1A/front-wheel-bearings-and-hubs/Toyota/4Runner/-/-/2004?VideoReply&TH-cam&ATony
90% if mechanics work in and get paid for what additional work they can scam you for more money 😫😤🤔 You really need to ask friends, co-worker, condition of the shop and how dirty employee's are to find a reputable Mechanic!! They are Really hard to find ,!!
What about if you have a 2WD and no halfshaft in front?
My front driver side tire makes a humming sound as well.could that be the hub as well?
It may be. We carry new wheel bearing assemblies on our website with FREE SHIPPING and a 2 year warranty. If you find that yours are bad, I can post a link to the ones on out website, if you reply back with your application. Thanks got checking us out. Have a great day!
It ended up being the hub and bearing.It is now fixed and the noise is gone.smooth sailing.thanks for the info
Ive been told my wheel bearing is going bad...What can happen if I dont replace it right away? Also my axle is leaking in the front it seems.
I wish I lived by you you would be my mechanic you're the best mechanical I ever seen I enjoy watching your videos great job man
Is there any kind of noise associated with this?
Try a high speed wheel balancing. Not done or if you hit a pot holder could of unbalanced your tires.
I got a 06 Chevy Avalanche, and its making a bad Constant
Clicking/Ticking noise, When I go in reverse on the rear passenger side
only... What could this be ?
+Free Spirit It could be an emergency brake acting up, or possible a wheel bearing. 1aauto.com
Does it kinda sound like twigs snapping. Or a loud click? If so it may be the axle u joint.
i need your help... i changed my driver wheel bearing with spindle.. because i could hear the noice with a different one from the yunk yard.. but i still hear the noice coming from the driver side... but after seening your video i did what you did.. i had my sister press the gas the noice came from the driver side.. when i looked under the car. the driver tire was not moving at all.. when i looked at the passenger tire it was moving to the sides like the one in your video... sorry its long... both wheels did not have any play up&down or side/side... if you can help me thanks
+Jesus Moya Is it possible that the brakes are stuck on the driver side? 1aauto.com?TH-cam&CTA%20Comment&ATony 866-403-3393
I have a bad humming noise when im on the gas and it goes away when I let off.. Is that the hub??
could this bad hub be the reason my mountaineer gets "the shakes" around turns?
so what if it moves alittle side to side? ball joint? how do you tell if ball joint is bad?
my passenger side wheel makes this sound: whoost...whoost...whoost...whoost. while i'm drinving. my dad had a different wheel on it but i put the spare on it and it made the same sound. i'm getting my oem wheel put back on with a new tire (the old had a flat, thats why he put the other wheel on) and i'll check the noise then. but i saw a ring on the inside of the wheel of the other and the spare. i'm thinking its the caliper that is making that sound rubbing against it. ?!? response please
If the wheel moves from side to side it could be a bad wheel bearing.
My car is a rwd and it does not have cv axles .. Would this work on mine? 98 chevy camaro 3.8L 165xxx Manual transmission
Thank you for watching! Yes you can still check your bearing using this technique.
888-844-3393
Will that make your Tire Shimmy ?