AcroRip V10.7 Guide of Things To Know

In this informative video, we're diving deep into DTF Pro AcroRip Version10.7. Whether you're a seasoned vet or just curious about DTF, you're in for a treat. Join us as we explore, discuss, and share insights on the complete setup.
🔔 Don't forget to hit the notification bell and subscribe for more DTF Printing content!
Since my page is still young it won't allow me to post a link yet but go to: dtfpro.com
Connect with me:
Email: [e-mail]
TikTok: GraphixByGartee
#3DPrinting #AdditiveManufacturing #DTFPrinting #DigitalTextilePrinting #Innovation #PrintingTechnology #CreateWithDTF #PrintOnDemand #CustomPrinting #TextileDesign #PrintedApparel #PrintedFashion #PrintedHomeGoods #DesignandPrint #PrintedCreations #DTFInks #PrintedArt #PrintedTextiles #PrintSolutions #CreativePrinting #PrintedGifts #PrintInspiration #PrintedDecor #PrintedWearables #PrintedMerchandise #PrintedProducts #PrintedElegance #PrintQuality #PrintMagic

[@unicronbot]

Very good info.

[@graphixbygartee]

Glad it was helpful!

[@MarilynJennings-gz8en]

thanks I am waiting on my software to get here to start so I def need tips and help.

[@qtchella37]

can you do a video to set for blue image not to come out purple

[@graphixbygartee]

So with this the first thing came to mind is that you may have the red slightly mixing with the blue inside the printed. Maybe the seal has an opening to where it’s leaking out. In other words, make sure to look at the printhead alignment. Check the printhead alignment to ensure that the nozzles are properly aligned and not causing any color mixing or misalignment issues. Next, software settings: Verify that the settings in your printing software are configured correctly for blue prints. This includes color settings, resolution, and any other relevant parameters. I hope this helps.

[@qtchella37]

@@graphixbygartee I'm new to this ,not sure how to check settings on printing software

[@isandravillafana1673]

Hi, I did everything, but for some reason the white ink is not printing, could you please help?

[@graphixbygartee]

Have you tried to power clean it to purge the white. Also printing on white paper can be hard to see, so try to print on film. Hope this helps.

[@evonnegreen1245]

Does the image have to have the background removed to only have white under color

[@graphixbygartee]

Removing the background may not be mandatory, but it depends on your specific design and printing requirements. If you want the white under color to show accurately, it's often advisable to use designs with a transparent background or remove the background to avoid any unwanted color interactions during printing.

[@hustle-valleyco]

My printer is not printing the white ink on the back of the image. I’m not sure why. Followed all the instructions in this video. Hopefully you can help will appreciate it. Also great video💯

[@graphixbygartee]

Is it printing white at all in the image, as in the main image (front)… not the back, if not may have to run a power clean to purge the white.

[@rozolynnsworld1961]

How do I get the red box bigger? Great video by the way !

[@graphixbygartee]

Are you speaking on the template size? That should be on the top menu bar to adjust the margins.

[@reginahardaway7454]

how do I do a color adjustment with acrorip? I change it in the ink limit but the colors don't change when I print. The picture is teal/green and it prints light blue.

[@graphixbygartee]

Some times, when you put in the ink or refill, it may have a bleed over from another color. I would suggest nozzle head cleaning or power clean (uses a lot of ink).
Question: is this one of your first prints?
If that doesn’t work or you’ve already done that and you’ve exhausted other options I would uninstall the program and then install it again. There may be a file that is corrupt file or missing a file during the install. Truthfully I’ve never had this issue but I hope one of the things I’ve mention is new information that you can take away.

[@dealingwithjay]

can you use the ACRORIP software
on a Mac Book air

[@graphixbygartee]

At the moment no, it’s only for windows. But if you want another program it will be CADlink and that should work.

[@leahdunavant9114]

Which software do I need for the xp 15000

[@graphixbygartee]

I would recommend Acrorip for the xp 15000 or any DTF printer, as it’s a user friendly program and it’s cheaper to purchase than Cadlink. I got mine from DTG Pro, located in California.

[@badkarma2202]

What if you do t have white ink?

[@graphixbygartee]

Not understanding your question? Can you explain what you meant?

[@annaescobar2134]

Is there a digital one

[@graphixbygartee]

There is no digital copy, you must buy a dongle which is a USB. They do this for less piracy of the software. Hope this helps.

[@lanuevareflexion]

Una pregunta mi amigo tengo el acrorip v10.7 el programa esta bien pero no me lo reconoce et8550 epson dtf

[@graphixbygartee]

Try to check if the printer is properly connecting to your pc. If that doesn’t work you may have to reinstall the program bc files may have been corrupted during the first install. I hope this helps.

[@lanuevareflexion]

Grasias mi amigo lo voy a intentar