Honda CB 400n oil + oilfilter change

Hi, I'm Faska,
and I make things in my garage,
I try to upload sometimes a Video.
I do it just because I enjoy it so do not expect too much.
If you have any questions you can ask me in the comments, and I will try to answer them as soon as possible.
---------------

[@PeterPan-iz1kk]

Thanks for a very nice video! I did this job on my CB400N today, and your video was really helpful.

[@normanwhite3104]

Fantastic video, really shows how easy its change the oil on your superdream, this is showing the 400N and its the same application for the 250N superdream ❤

[@prout27cat]

Thanks mate you saved me… I had a persistent leak from near the filter housing…thanks to your clear video the problem became apparent, the previous owner had put the spring on the outside of the central nut😲😅

[@mickhenson1]

Hi Faska, great video I've just started up my CB400 after 15 years. changing the oil is my next job

[@alfiedodah9799]

Use a six point socket, replace the missing shim washer at the oil filter spring, torque setting oil filter bolt 20-23 ft/lbs, replace crush washer sump plug, torque setting 25 ft/lb.....do it right

[@piperjomo]

There should be a washer between the spring and filter

[@chuckbuckley6425]

Are you going to do a strip down on this one too? Just bought the same bike, so would love to see it done before I get into it haha. Just getting it running first haha.

[@Beppis9]

Hi Faska, which types is your CB mounting? great vid btw, eager to watch more

[@garydunn3037]

Its not exactly "Rocket Science" I did this every 1000 miles on my 250N SuperDream

[@statendrei5]

How can i tell between the honda cb400n 27hp and 43 hp model?

[@bikedogtor1663]

Hab ich auch noch nie gesehen wie der ölfilter eingebaut ist. Komische Lösung.

[@joeyengelkes9370]

When is Comming a New zundapp video out?

[@giovannibarbieri4410]

Buongiorno Dove l'hai comprato il filtro e le varie guarnizioni??? Ed a che costo?????

[@normanwhite3104]

Ditto 😂

[@joakimeliasson3244]

Hi! Although not drilled from factory, your engine seems to have the features for attaching an oil cooler on the engine case. As I've seen that older models doesn't have this I'm therefore curious what year your bike is? If you also happened to know what engine model you have that would be really nice to know.

[@calebrobb4292]

What is the other o ring for?? The bigger round one in the packet?

[@stanisaww9543]

Hi do you have a oil lick in cower oil filter and carter ? I have a Honda cb400 N 1982 and I have a oil leak on connection betwen engine part and cower oil filter , I have change cover , and new gasket . 2 months later leak is again , I see you have a oil marks on muffler , it's normal in thease moto ?