A real beauty. It's nice to see the purposeful way you finish your knives. Your channel is just a joy and I, as a beginner, can learn a lot here. Thank you!
Just found your channel. Never made a knife before in my life. Think I've just found myself a Winter project. Really enjoyed this video. Looking forward to watching your others...
Hey been here quiet awile watching your amazing videos Watched you in your old shop and your move to this shop and man you are like wine just getting better and better with age 😄 still a pleasure to watch you at work keep it up 👍
Can I just say I really dig this knife and your style in general...would be proud to own this or any knife you make but this one's simple yet bold in it's own right... thanks for the video!
Two questions, first which heat treating oven are you using? And second what is the tool you are using to help fold your foil packets? Thanks man, for a nee knife maker like me your videos are amazing
Great video! In this case was there a reason why you heat treated and tempered before doing the initial grinds? From other videos it seems like normally heat treat comes after? Thanks!
I’ve wanted to make a knife for a very long time but hit a roadblock on heat treat. I have access to a kiln and going to try with 1095. Trying to find a steel with simple heat treat. You have very nice craftsmanship.
its called cryo treatment. It gives a few extra hrc (the steel gets a little harder). This is is due to the change from remainig Austenit to martensit in the steel.
When you put the pins in, is there a special drill bit or rod that you buy that is precise? I found that a 1/4 bit and maybe 1/4 brass rod is nowhere near exact.
Sweet! I use knifemaker.ca (really great little "mom & pop" shop with stellar service) out of Sundre for stainless steels handle material and all that. For O-1 tool steel I get it from Metal Supermarkets in the SE. So rad to learn of other close to me making knives 👍
Hiya, just want to say I love your content, and if possible would love to show of your knifes when I start my channel in a couple of months I hope I can order 1?? I'm from Coventry England my name is Lee and like I say u make me feel like getting my angel grinder out!!! KEEP IT BRO!!!!
You should try a hollow grind on your scale bevels. That would be similar to the target stocks that came on Smith & Wesson or Colt Revolvers. I think it could look amazing.
I talk about the various steps and why I do certain things in my voice-over build which is on Patron 👍 www.patreon.com/Simplelittlelife
Beautiful knife! If she doesn't have a name yet, you could call her "Chubby" because of that belly on the handle 😂😂.
Thank you! Hahaha 😆👍
I'm looking for a good skinning knife could you make me one?
I'm a _simple_ man... I see a Simple Little Life video in my feed and I click it! Excellent work as always sir! That's a classy knife right there!
Thanks buddy 👍
I love seeing how your process has changed over the years. You continue to refine your craft and it blows me away.
Thank you so much, I appreciate that and the continued viewership 👍
Finally someone with nice watch.
Nice video and beautiful knife.
Love it
A real beauty. It's nice to see the purposeful way you finish your knives. Your channel is just a joy and I, as a beginner, can learn a lot here. Thank you!
Thank you so much! I’m glad it’s helpful and you enjoy it👍
finally. I love to watch good videos instead of many. keep up your work
The fact that there is no music makes it more satisfying...
So glad your still making videos, love to watch you make knives. Keep up the great content.
*Very beautiful knife!*
Awesome job, I'd definitely buy one. Thanks for sharing.
Just found your channel. Never made a knife before in my life. Think I've just found myself a Winter project. Really enjoyed this video. Looking forward to watching your others...
Thank you so much. I appreciate that. Hopefully there will be some other useful thing for you here 👍
That knife is a beautiful piece of art. Well done.
Nice to see you back ion TH-cam, doing what you do so well, Jeremy. A beautiful knife made by a man who really knows his stuff.
Wowww, wonderful knife!
ooooh, it's TS Prof! Best way to sharp knife
Absolutely beautiful blade. Precise work,perfect fit and finish. Well done !
Wow, just tha Best..! Excelent..! Thank for you video.
Thank you so much! I appreciate your wonderful comment. Cheers 👍
Enjoyed the process 😊 I did not miss a single frame . I must say you have a beautiful workshop Sir😊
Thank you 👍
WOW. Yet again... Just WOW.
Hey been here quiet awile watching your amazing videos
Watched you in your old shop and your move to this shop and man you are like wine just getting better and better with age 😄 still a pleasure to watch you at work keep it up 👍
hahahaha, thank you so much, I appreciate that. 👍
Nice !!! Let’s see a 4” wrapped up in paracord. Super craftsmanship!
Can I just say I really dig this knife and your style in general...would be proud to own this or any knife you make but this one's simple yet bold in it's own right... thanks for the video!
Thank you very much. I really appreciate that. Cheers 👍
Outstanding!! My favorite of yours yet. Well done, that was cool to watch.
Love your videos on both your channels, keep up the great work
Man, there's another channel?! I've been missing out.
Thank you! I really appreciate the support in both places 👍
Are the pins used made from stainless steel or mild steel ?
That's a cool knife, simple yet classy!!
Man, you make it look so easy. Keep up the good work man.
what an amazing knife
That handle is perfection! 👌
That is a work of art. Just beautiful. Thanks for sharing.
Good movie!
Thank you!
*Again. A very beautiful knife. Almost perfect. Unfortunately, it has one small, but for me very significant flaw: "it's not mine" 😞*
Nice, you’ve outdone yourself!!👍 you never cease to amaze me!
Thank you so much! I appreciate it.
love the sculpting on handle. Beautiful quality knife!
That's beautiful! I'm going to try this. Let ya know how it goes
Профессиональная работа ! С удовольствием посмотрел! Супер! 👍🔥
Simply Beautiful.
Two questions, first which heat treating oven are you using? And second what is the tool you are using to help fold your foil packets? Thanks man, for a nee knife maker like me your videos are amazing
Beautiful work grand master.
Super nice build. Clean!
Gotta love classic Loveless style.
Fantastic job❤
Thank you! Cheers!👍
Excellent work !!
Thanks buddy 👍
That’s nice! How did you darken the logo ?
Awesome! Saw an older cleaver video of yours. It’s fascinating watching the whole process.
Ps...definitely noticed the flames hat. ‘Berta! 👍🏼
Hahahaha, yeah!!! ‘Berta! 😆👍
Nice fit and finish.
Great video!
In this case was there a reason why you heat treated and tempered before doing the initial grinds? From other videos it seems like normally heat treat comes after?
Thanks!
What Countersink do you use? I have seen a lot of countersinks that chatter on metal and the one you use seems to work well.
Beautiful job.
Hey Jeremy, what grinding jig are you using there? Do you have a video on it?
I’ve wanted to make a knife for a very long time but hit a roadblock on heat treat. I have access to a kiln and going to try with 1095. Trying to find a steel with simple heat treat. You have very nice craftsmanship.
That’s a Beautiful knife, thanks for sharing!👍
Wow, just wow 👌
Fantastic video as usual!
Beautiful. What grit is that final trizact belt on the bevels?
Beautiful knife. Thank you for making so good videos. I enjoy every one of them🙏
Linda linda demais meu amigo parabéns 👏👏👏👏
Thank you!
Piece of art here!! And nice video btw, compliments!
Beautiful!
Thank you!
@@Simplelittlelife certainly my pleasure!
Liked it before I even watched it haha. It's been a while since iv seen a knife build from you
Do you do anything with the scrap pieces that are left when you cut the knife from the square in the beginning?
Awesome craftsmanship, loved every second of it! Subbed...
Thank you so much, I really appreciate that 👍
Amazing work
Great video and a beautiful knife.
Gday mr Jeremy.. cool knife build.. finished product looks awesome.. any progress on my two??
why do you use an angle grinder to cut blade profile instead of the portable band saw
This steel work hardens quickly and dulls sawblades
@@SzyMoc_ nice, thanks for the explanation man
jordy brinkmann np mate
This is the first channel I’ve seen freeze the knife. What does that do for the metal? It’s very interesting.
its called cryo treatment. It gives a few extra hrc (the steel gets a little harder).
This is is due to the change from remainig Austenit to martensit in the steel.
Beautiful work as always!
When you put the pins in, is there a special drill bit or rod that you buy that is precise? I found that a 1/4 bit and maybe 1/4 brass rod is nowhere near exact.
super matos !!! je rêve d'un atelier comme ca pour faire mes couteaux !!! merci a +
Beautiful knife Jeremy, thanks again for sharing your process with us
Where did you get the machine that does all your lettering work ? ie., “Simple Little Life “ Awesome looking lettering
Nice job. What did you use to etch the Symbol on the blade?
Nice vid, and a lovely knife.
Clean! Nice video as always
Very nice!!!
Beautiful.
Love it Jeremy. Thanks for sharing.
Where did you get that metal sanding block
thats a nice knife. how much do u charge for a knife like this
Awesome Video
Where can you get one of those sanding blocks?
beautiful knife, I would like to have one😁 pozdrowienia z Polski
How do you keep from burning the edge?
Очень хорошая работа, нож супер!
Where did you get the Cryo Tank?
Why did you make the heat treatment before grinding?
Where did you buy that band saw?
Perfect
Great channel. I’ve been tuning in for awhile. I’m also in the Calgary area. Where do you source your steel around here?
Sweet! I use knifemaker.ca (really great little "mom & pop" shop with stellar service) out of Sundre for stainless steels handle material and all that. For O-1 tool steel I get it from Metal Supermarkets in the SE. So rad to learn of other close to me making knives 👍
What does the tin foil do?
Why u use foil for hardening?
Hiya, just want to say I love your content, and if possible would love to show of your knifes when I start my channel in a couple of months I hope I can order 1?? I'm from Coventry England my name is Lee and like I say u make me feel like getting my angel grinder out!!! KEEP IT BRO!!!!
Do you know what the Rockwell is on that blade
Perfect!
Thank you!
What are you doing when you wrap it in foil? And heat it and then freeze it?
Heat treating the blade 👍
@@Simplelittlelife why wrap it?
What is the tool used in minute 8-9 to set the bevel?
You should try a hollow grind on your scale bevels. That would be similar to the target stocks that came on Smith & Wesson or Colt Revolvers. I think it could look amazing.
You should try it 👍
I love it. Very nice.
What brand of blue tape do you use? I need to buy some stock in a new company. Lol
Be well.
Hahahaha! Thank you 🙏👍
What knife sharpener is that