SUZUKI GS1100 Cafe Racer Build
ฝัง
- เผยแพร่เมื่อ 24 พ.ค. 2019
- Some kind of monster.......
This bike turned out great, better than I could have dreamed for. Everything is gone through, replaced, upgraded and everything was done to make this a very special motorcycle. I choose not to put any power upgrades on the bike, since I think anyone should be able to drive it, and its quick as it is.
Make sure to watch the second part for a walk around.
Thanks for watching. - ยานยนต์และพาหนะ
![[TH] VCT Pacific Stage 2 - Playoffs Day 3 // DRX vs GEN | PRX vs TLN](http://i.ytimg.com/vi/CWM1Q-2-o3M/mqdefault.jpg)
Beautiful motorcycle. ❤😊
Holy cow … you took it apart and re model it !!! Nice work men ! 👌🏼👌🏼
Aye this is pretty. Just rebuilt a 425 (little brother to the 1100). Picked up a 1100 for 300 bucks a few months ago, wanting to do something like this in the near future with it. Thanks for the post!
Nice job mate
Just got a 81 suzuki gs 1100 omg this is the project for me😃
Beau travail
Spettacolare 🤟
Looks like you have mikuni cv carbs like my gs850. Hoe much of a pain was it to tune thise for pod filters and exhaust?
yours is shaft drive, are you sure your engine is 16 valve and not 2 per cylinder?
Where can I find these pipes ? I have the same year & model bike and I’m looking for a different set of pipes
I love it! You have a template on the fabrication of the rear ferring!?
Thanks! The fairing was a one off for just that bike. I should have taken a mould of it! So sorry, no template.
@@askeviksurf well any suggestions on how to start?lol I'll take anything as a starting point 🤓
@@derekv275 CAD=Cardboard Aided Design is always a good start. After you get a good basic shape, lines, length, width all that, then you gotta decide fiberglass or metal? I made one in steel first, but didn't get it right, so I went with high density foam and fiberglass. Depending on what you're comfortable working with. Important thing I'd to have a clear idea in your head, and most important thing is to just get started, just start playing and have fun.
Damm so beutifull....
Thanks.
Wasn't this motor a 1000, 8v head, and the 1100 16v also called TSCC, twin swirl comb.chamber
The tank looks like it came from the 1100 but the motor seems 1000
Ahh this is the G shaft driven bike, I remember the E chain driven, the superbike king of it era, then the Ninja900 came and wiped them out.
Would you sell me a body kit? I picked up a free gs1100 and its built for mud racing im thinking this style
But do I have to strip it down to do the seat fabrication?😬
There shouldn't be much you need to move. Brake lights, rear blinkers and a few wires. You do need to chop some of the frame. But you could just repaint those sections, since it's mostly hidden by the new seat and cowl anyway. Good luck
@@askeviksurf thank you for the reply I'm a ok welder buddy has a cheap Flux core welder it should do the trick . I just love the bare bum look lol biggest thing I like is the seat awesome build
Gasless is fine, just a bit more grinding and sanding. Happy chopping and let us know how you go.
@@askeviksurf oh I will! Thank again