GS750 Cafe Racer is back together and looks unreal!
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2024
- Finally putting together all the pieces of this 1978 GS750 cafe racer build
My shop:
Website - www.younggunsgarage.ca/
Instagram - / younggunsgarage_
Bike stuff: pic__metalworks
Timestamps
0:00 - 5:55 - Putting it all together
5:56 - 8:40 - New carburettors
8:41 - 10:04 - Gauge & warning lights
10:05 - 16:41 - Wiring the M-unit
16:42 - 19:05 - Final reveal
Contact: pic.metalworks@gmail.com - ภาพยนตร์และแอนิเมชัน
Love the frame onto the engine rather than engine into frame 🫡
Finally someone who know how seat and Tank should be positioned on a naked bike build! Nice one!
That’s how the gs750 is made.
Looking amazing dude!!
Very clean and really shows why we sometimes say less is more
THE BEST AWESOME PERFECT AMAZING WORK.....😁👌👍
I am completely in awe. Incredible job.
Super looking bike. Concerned I didn’t see a torque wrench used once though 😮.
Nice shop!
I couldn’t help but smile when you rolled that front wheel between those forks to install it … and then seeing it all together 😍
Looks fantastic! Great job!
I just saw a running 1976 GL1000 for sale for peanuts. I smell a café racer project.
If i were to chose this over a brand new bike...i would still choose this. Realy nice project
Awesome video!
I'm putting these same forks on my SV650 now.
Those wheels are awesome.
Nice bike!
Your are so focused so concentrated into assembling this GS750 perfectly! Amazing!
20 years and I never thought to fit the frame to the engine. I am feeling dumb as.
Very nice build 👌🏼 it’s a great feeling seeing everything come together.
Bravi bel lavoro complimenti
Very nice
simply stunning - great work
yo this bike looks mad!
Gorgeously gorgeous gorgeous bike love that clean look I was waiting for this final assembly and now can't wait for you to ride it the first time however I got an idea if you wanna see it works I think if you throw a tiny fender on the rear wheel it will look awesome but I love this build anyways and also nobody had to see your face when you turned the power on first time we all heard the joy in your voice instantly Congrats on this beautiful build again.
A very comprehensive assembly video thanks. Very jealous of your garage and tools,makes mine look shabby. Great stuff will subscribe.
Nice Custom, so Yeah!
I love motocycle, nice....good luck and sucses for your konten creator👏👏👍👍👍
Wow, bike looks great! Love the rims.
been watching since day 1, cant wait for the test ride video
That looks sick, very much like a ccm with a single sided swing arm and a hefty four cylinder, great work 👍✊
Just subscribed. Lovely work, minimum of narration (ASMR). Calming, informative, enjoyable. Thank you.
I build 1/12 bikes. Yours is terrific!
Very beautiful looking bike 👍
Stunning!!
👍👍 Beautiful
So clean, instrument panel is stealth tek😁
hidden battery, you can see the carbs,
the rear shock looks good.
the offset rim with brakes inside is great, you are good at this.
what a badass build you killed it!!!
Nice build.
Excellent work 👌
Great job so far,,looks awesome
Finally, a properly designed cafe racer. Sexy AF.
Gonna do any motovlogs on this epic machine.
Can't wait for see it on the road❤
Ficou linda! 👍🏼
A work of art. Beautiful
Gravity: **Surprised Pikachu Face**
So simple, yet that wouldn't have crossed my mind if I was the one to assemble it. 👍
Sweet
Looks great
Damn 😮
looks sweet, just picked up a 99 gsxr750 parts bike so I can pull the front end and swing arm off for my 80 gs750 doubt its gonna come out anywhere as good as this but I'm looking forward to the project it's gonna be.
Very cool, try to balance your bike. With a straight touring handle bar you will seat more upright and it´s perfect for hill climp and to feel front and rear tire grip. Beautifull motorcycle😍😍😍
Fantastica!
Slick, the frame looks skinny in my eyes, but still a beautiful build.
Hola saludos desde Chile!!!
Genial trabajo
Y me gustaría saber... ¿En cuanto esta evaluado el trabajo y la Motocicleta con el resultado final?
Sigan así Da gusto ver sus trabajos
Exellent, thanks
I haven't watched your videos in a long time... I hope you will always be successful in the future
Amaze...
awesome machine you have created, really enjoyed watchin the build, congrats fella
Bad AF bro!
u r amazing..
Crisp 👍🤞👊🏼
Sick! 👍👍🎉🎉🎉🎉🤘🏻🤘🏻
Looks clean,brutal,pur and sexy😊
i'd suggest you to change up the seat it doesn't sit well with everything.. other than that the bike is just simply fabulous the color and contrast of the wheels are insane same goes for the wiring as whole...damn man you did great
How do those short intake manifolds perform? Longer would give you more torque from what I understand
Such a brill classic looking bike , next build gsxr 1100 motor, or k1 gsxr1000,.
Then it will go as well as it looks .
Awsome
It's the 10 Crack commandments
Beautifuk build! Inlove the carbed 4 cylinder❤ did u say the forks were powdercoated? I was thinking about serakote?
Прекрасная работа! Только я не понял, в чём смысл микро крыла на переднем колесе, от чего оно защищает?!
Big enough motor?
Nice clean build, did I hear you say: 'points' ! Electronic ignition sourly?
Nice one sir o need help for my gs 650g parts head
That is Art right there! 😎🤝
And what carbs are those if you don’t mind me asking please
Keihin CR Racing
What kind of wheels are those? Looks cool 😎
Are you worried about heat issues with the reg/rec installed above the engine? Amazing work bro
a little but i’ll have to see. gsxr’s have them right next to the radiator so this can’t be any worse
El velocimetro donde lo puedo comprar bro?
Hi, I really enjoyed this video, what headlight did you use on this build?, please let me know, I love it, thanks
Headlight is from purpose built moto
Fastis in '76'!
Gidday from Australia great work mate but i think your front wheel mud guard is to close to the tire if you get a rock stuck could puncture your tire
You may be right there we'll see how it runs. I may have to re-visit and raise it a bit
Beautiful work
BTW your front tyre is in the wrong direction
you made me second guess myself, but tire direction is correct here 👍
👍
So you put a diode going into a "light emitting diode"?
Wait does that swing arm just fit perfectly onto the frame or did you have to fab something
I wish, had to make it about an inch wider to make it fit
Hi mate I’m interested in the build can you send me some info on your bits like wiring and digital with this please whatever you’ve got I’m really happy that you’ve got that thank you
I wonder if a Yamaha tracer 700 can converted to a motorcycle like Yamaha tenere?
What rims / wheel did you use on this bike ?
May i know ?
Thanks
wheels are Jonich
I wish I knew how to do this. I dont even know here to start
Not a single torque loading applied?
what is this torque loading? :)
what kind of battery you use on the bike,the battery size is so small ,i need a same one on my bike,she need a clean shape
battery is an anti-gravity lithium ion
friends how much does it cost for 1 GS750 motor
Ummm not sure if it's was just in the editing but I hope you packed them bearings better that the video shows.
yes bearings are packed well 👍
Killer bike !
Exhaust?
What gauge is that?
Gauge is from motogadget
How much?
Great build!! But if you grease wheel bearings like you greased the neck tube bearings your wheels would fall off!!!😂 smearing grease on a bearing is not sufficient! They need to be packed.. you can do it by hand just watch a video or get a packer that works with a grease gun….
bro .i have a advise for u ..why dont u try old ducati 748 exhaust setup...u have to mod it..but it will suite your swingarm too.....i know u have already something on your mind for this...but just saying..
I like the twin pipes coming up the side and may do something like that, I'd probably make it a shorty though
@@Benji... .only real petroheads know when a bike starts talking...she wants something gnarly now...
and break some lines ..dont go traditional cafe racer..it will be unique .
What cute old analog speedometers. Thank goodness my bike still has them. The bike is beautiful, aesthetically beautiful. I wouldn't have put anything digital at all. That's for today's terrible factory bikes
where is battery ?
I hid it under where the swing arm mounts to the frame. Good to know you can't see it!
@@Benji... looks great! But what battery do you use? It should be small size
I don’t understand why professional people don’t use simple zip-lock bags to pack bearings with grease🤔 Easier, less messy & go from bag the position without a drop anywhere except in the bag😉😎
You look freakishly like a guy i deployed with.
You basically put an old cb750 motor on a bike with all new custom parts... That's not a cb750 anymore! It's cool and all but easier to just buy a new motorcycle, lol
Parties aren't your thing huh...?
If you do not now what it means to "do the ton" you should not be allowed to own a "cafe racer"
Learn to pack a bearing ...watch a tutorial!
Una hermosa máquina con un diseño elegante y sencillo saludos desde México.