Rear Bushing Replacement On Range Rover Sport 2006-2009
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Rear bushings are a common replacement for Range Rover Sport 2006-2009, or LR3 2005-2009. When the bushing in the lower control arm becomes soft, old and worn out it will effect steering stability.
It also throws off your alignment and creates tire wear instability on steering.
Atlantic British Ltd. stocks all the parts you need for this replacement, be it the entire lower control arm or just the rear poly bushing.
Watch Doug, our Land Rover Master Technician, talk you through the replacement of the original equipment rear bushing (or you can use the optional polybush kit 1BUPOLYO, which we show in this video) of the lower control arm suspension.
Access to this bushing is granted by removing the entire lower control arm assembly.
0:09 Common issue worn rear bushings
0:21 What you’ll notice and the effect thereof
0:51 Prepare the vehicle for the job
1:15 To remove the lower control arm
6:18 Lower control arm is removed
6:51 Drill out old bushing
8:36 Install new poly bush
9:56 Re-assembly
13:53 Set to normal ride height
14:22 Ordering information
Please refer any questions or comments to 1-800-533-2210, or go to www.roverparts...
Parts List:
Polybush Kit
www.roverparts...
#atlanticbritish #rangeroversport #bushing
Nicely done, though I would add that one should add bushing grease on the metal core since it should rotate freely inside of the orange bushing. This will prevent squeaking in the future. Do not put grease on the outside of the orange bushing since the bushing is not supposed to rotate.
Thanks, replacing one now.did the same as you. Just saw your video. Lol.👍
Thanks for the video!
Very well explained but I've decided open heart surgery may be easier unless I have access to garage facilities 😕
RRS is currently in the shop for all bushing replacement. He just called and said 6 machine shops turned him down for pressing the bushings out. I see why now.
Great tips on setting it back on the ground and let it be in its relaxed position👍🏽👍🏽 … I assume you can do this to the front control arms too right ? .. I have a 2011 R/r sport HSE . I just got a recall for my gas tank for the - FUEL TANK FLANGE ASSEMBLY CRACKING -
Two questions:
If the rear control arm bolt is known to seize, why not put anti seize on the new one when replacing it?
If your going through all the work to pull the control arm, why not do both front and rear bushing?
Thanks for the video.
+TheTraakon I think that's because you dont want it to come loose again unless required
Hey Doug. Great videos... About to replace my rear sway bushings. Should I also be replacing the end link bars?.. 2013 RR Sport SC. Thanks.
It's easy to get them out. Light it with a propane torch. Be careful it shoots out across the floor.
do you need to also replace the smaller bushings? I noticed you didn't
I have just taken my car for whole control arm to land rover agents.any tips of what to check if the job is done to perfection.
Check your web sight this bushing kit is not listed
Thanks for the video. When you reinstall that hub nut do you use a new hub nut & re-peen/stake like the one you took off, to keep it from backing off?
I have the knocking when I brake. Is it typically only the rear bushing that needs to be replaced ?
Thanks for the video. If I want to replace my lower and upper control arms, do I need to empty out the air in the EAS system?
No, you can take the control arms out without deflating the EAS system. Please refer to this video: th-cam.com/video/zTzKf8yMwsU/w-d-xo.html
no
Do you have any video how to change the Parking Brake Controle module? Thanks!
Hello and thanks again . How long does it take to replace a front upper control arm on a Range Rover sport? Thanks in advance .
Does it hurt to deflate the air bags in the suspension? I am planning to replace both the air struts and the control arms at the same time. Thank you
2 minutes in... fuck thiiiiiiiiiiiiiiiiiiiiisss, paying for it lol
Please be very careful with the torch , the gas tank is inches away from that part!!!!!!!!!!!
Why can't you guys open a shop in Jacksonville FLORIDA
we're not in the shop business.
@@atlanticbritishrp 😭😭😭😭😭
Think this can be done with safety stands?
not front?
Don't use poly bushes on theses models of Range Rover Sport or LR3.
I'm wondering about the poly bushings. It looks like the rear most control arm is on a different radius then the lower A arm and intended to flex the very flexy factory standard bush??
Why on earth are you quoting tools in fractions of an inch? Vehicles are metric--you should be too.