How to Replace Front Brakes 2005-2010 Pontiac G6

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1APBS04263
This video shows you how to install front brake pads and rotors on your 2005-2010 Pontiac G6. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2005 Pontiac G6
2006 Pontiac G6
2007 Pontiac G6
2008 Pontiac G6
2009 Pontiac G6
2010 Pontiac G6
Tools you will need:
• Pry Bar 1aau.to/oc3/1AXAA00020
• 10mm Socket 1aau.to/ojv/1AXAA00017
• 14mm Socket 1aau.to/omh/1AXAA00015
• 15mm Socket 1aau.to/omh/1AXAA00015
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oi/1AXAA00288
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/onk/1AXAA00016
• Torque Wrench 1aau.to/og9/1AXAA00044
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• sanding disc
• Hammer 1aau.to/oc9/1AXAA00091
• Wire Brush 1aau.to/oaS/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Pontiac G6 2005-2010 1st Generation: • Pontiac G6 2005-2010 1...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@gregking6698]

that caliper looks like they salvaed it from the TITANIC. never seen a caliper that rusted even in Detroit!

[@MichaelRodriguez-fh3zj]

Do you have to bleed air out of the brake lines after doing this ?

[@TheOnlyWillyDee]

do you absolutely need the break grease and etc?

[@TRQ]

+WillyDee It is recommended to grease the brakes for installation.