ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- The Silent Captured Spring for the Law Tactical folder has been a popular upgrade since we released it last year. If you need a visual how-to on getting yours installed, our Shop guys have got you covered this month.
Law Tactical SCS Conversion Kits: www.jprifles.c...
________________________________________
Connect with JP Enterprises:
www.jprifles.com
jprifles
/ jprifles
jprifles
I have Sylvan Arms Gen 3/4 adapters which is the same concept. Will it work with these adapters or will i need to get the special plunger for the BCG as well? I ordered the SCS15H2 setup being i shoot suppressed.
Sylvan makes an adapter for the Gen 3 for use with the SCS. The plug needs to have a hole in the center for the SCS slide to pass through.
Clear message, clear structure, easy to understand, thank you
Interesting. So, it was available for 2 years, and then not available for at least a year. Are you doing a 2y on and 2y off cycle or something else?
We did a redesign to improve the product. These are now back in stock on our website!
My Law kit doesn’t have the same buffer retainer here. It just looks like a regular pin.
Send us an email so we can help. Tech@jprifles.com
Which SCS would we use on a Q Sugar Weasel with the Law Folder? The pistol is a 7 inch 300 BLK with an adjustable gas block. I was planning to shoot subsonic 300 BLK suppressed only.
This one is what you'll need: JPSCS215LAW That's what I'm running in my weasel with the law folder. Works great.
@@RonHenry where did u buy it?
Why doesn't my retainer pin fit into the hole? It doesn't appear to have any burrs but may be the case
We would need more information to help you with this. Email us at Tech@jprifles.com and we can have someone take a look at it.
@JPRifles problem solved. I had to twist and turn it constantly and it finally worked its way in. No issues since
Where can I find this product right now I can only find the scs h2 but not the law folder one. Or where can I get the law tactical folder attachment parts kit?
you didnt apply much torque to the castle nut, that makes it easier for it to walk back on you and come loose, not sure if that loctite will get the job done
Can you post how to remove California complaint JP 9mm stock ?
Thanks for covering this installation. Run the SCS and Laws in all my ARs
Would this fit on a 17 Design IFLR? It looks very similar to their proprietary buffer.
We haven't tested that, so can't confirm or deny.
@@JPRifles have you tested this yet?
One potential problem that I see is that the 17 Design IFLR doesn't use a mil-spec buffer retainer pin; its retainer pin is threaded. This means that you would not be able to install the special retainer pin included in the SCS law folder kit. I suspect that you could just drill out the threads in the lower to make it compatible with a mil-spec pin, however, I have not had the chance to try this yet.
No idea what the purpose is for these parts.. not being a smarta$$, I genuinely see no benefit.. does the SCS have liquid in it to reduce recoil? I don’t understand.. my standard law folder configuration has worked for ~6500 rds, so far.. no issues
It has nothing to do specifically with the Law folder. The JP silent capture recoil spring is just a well known item used by tons of AR owners as it smoothes out recoil and quiets the spring noise. Apparently they have now made it compatible with the Law folder.
@@jimyeats interesting.. Prob have to use one to understand.. Thanks
@@jimyeats
so the standard BCG extension doesn't work with the Law Tactical? That's my current set up, and runs fine...
@@bigtechnazis3554 I’m not 100% clear on what you’re referencing when you say “standard bcg extension”. If I recall I think this video had to do with being able to use a JP recoil spring system with the Law Tactical. Yes, a standard recoil spring and bugger will work fine with the Law Folder.
@@jimyeats the one that comes with the law tactical folder.
I like this new Sanchez
No thanks to all of that useless junk.
I love mine. Definitely quieter and smoothes out cycling
@@RonHenry Quieter ? It’s a freaking gun in a rifle caliber normally 🥴 lol.
@@RonHenry I agree! There is a big difference between a Mil-Spec set up and an SCS set up. So much more smoother, quieter, and better to shoot!
@@TooManyChoices1 suppressors are a thing. Most JP SCS users are running them with suppressed guns.
@TooManyChoices1 bros never shot 300 BLK suppressed w/subsonic rounds. Makes a world of a difference with the sound and its definitely silk smooth. Worth the $$