ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- John Paul takes you through the process of reconfiguring your Silent Captured Spring.
Get your SCS here: goo.gl/J04UKq
Heading West by Audionautix is licensed under a Creative Commons Attribution license (creativecommon...)
Artist: audionautix.com/
Need to terminate the distracting background music
Not trying to be a jerk but your website is terrible. First it’s barley legible on a iPhone with which I use to order everything. Now this could be my phone. Just sayn. Also I can’t for the life of me find a “search “ button on the home page. So I go to the next logical place and click under “rifle parts”. Nope no sign of trigger parts here. So I look on every tab for trigger parts and can’t find anything about triggers or springs. Can you help me out. I may be way off base here. If so I apologize. Thanks
Look under the "Rifle Parts" drop-down menu, and then select "Fire Control".
My question is, can u take 1 or 2 of those weights off of the buffer and leave them off?
Nice job showing every part of the install except the snap ring.. where you cut away TWICE because you know it sucks
“…and then just reinstall the snap ring”. No explanation and literally the only reason I watched this video. 🤣
That snap ring really sucks
Is it possible to run without weights with a 8oz bcg light spring and regulated gas? Or substitute with aluminum weights?
I've have these in all of my piston ARs, absolutely love em!
The SCS is such a great product. It took the annoying twang out of my AR cycling.
You say "AR-10". Does that include the DPMS type .308 auto loaders?
Thank you. Got it.
Any plans for a collapsing stock for the AR10/DPMS lowers? ...with the special captured spring?
That would be nice to make a nice, modern .308 lighter (and more customizable) but the same size as an HK .308 with their collapsing stock.
For me the whole installation isn’t that bad except for the snap ring 🫤 ended up jabbing my hand trying to pry it enough to walk it off but I like the spring and it does work great but I’m debating whether it’s worth over a regular buffer spring and buffer cause it took me forever to break the thread locker since I didn’t have a torch or heat gun or blow dryer as I don’t have a use for that stuff 🫤 but I would like one for a lighter solution for an AR-10 build but I don’t know if it’s worth all that hassle again just to set it up.
If you purchase the one of the kit versions (JPSCS2-15K, JPSCS2-15K-H2, JPSCS2-10K, JPSCS2-10K-H2), the front screw has not been installed yet. You can do your testing to figure out the correct configuration without any Loctite. Once you've got it setup how you want it, put a little blue Loctite on the retaining screw.
@@JPRifles Oh there’s a kit version without that screw already installed? Thanks! I’ll check it out :)
buffers are way easier to change out
I purchased one today and installed it. Thanks.
Can you use only 1 or 2 weights and use the snap ring to hold it (them) in place?
Or NO weights and a stiff spring?
I have the same question, idk why he never answered yours.
You can remove all weights and run without them. You should then use a lightweight BCG and adjust the gas to a lower level. In many cases you have to run the green buffer spring for reliable operation. I would not remove the weight unless you tune the whole system as described.
Could we polish out the rod?
Best setup for 6.5 grendel with 20" barrel? (In terms of weight i mean)
I just purchased a full set of LMOS and silent capture spring system. This may be a stupid question but it have bothered me for so long. So by my understanding, the buffer weight and BCG move as a whole during cycling. So does it make a difference when you remove 1oz from BCG vs 1oz from the buffer weight? And if lighter the better, why don't I just remove the buffer weight completely?
I'm no expert but as I understand it.. You want some mass there to keep the speed of the BCG in a good range to not beat the rifle up. You should be safer running lighter weights (and 'maybe' no weights) if you have an adjustable gas block to tune the gas system for your BCG and buffer weight (or lack thereof). Main thing is to keep that bolt velocity in check.
How does this buffer perform with a full auto rifle? Tungsten better? Or not necessary?
Flawless! Like butter.
Keep in mind that for suppressed AR10 you may need three tungsten weights @ $120. This makes an already expensive spring ridiculously expensive. I bought one and I am done, it is just too expensive for what it does.
I've lost my instructions and I'm trying to select a lighter spring to hopefully eliminate a malfunction I've been having.
You can find the instruction sheets for all our products on our website.
@@JPRifles I found it. Thank you. I've got a failure to eject I've been trying to resolve. Hoping a slower cyclic rate will help.
will this work in my 223. AR-15
@Erik Barnes whoa internet explorer. i bought it like 7 months ago
I stabbed my self trying to get that snap ring off. The things an expensive paperweight.
lol how?
Offer some polymer weights for pure competition guns
Why not make sure that you are truly saved by Jesus Christ and practice this way. Remorsefully confess with your heart your sins to Jesus Christ who is God and tell Him that you right now are repenting of your sins and you want to be born again of the Spirit from above. Tell Jesus that you are remorsefully sorry for breaking His commandments and that you are begging for forgiveness from Him. Allow His blood from the cross to wash away your sins. After this is done with your heart successfully the Holy Spirit will come to live within you and He will rebuild you from the inside out.
Look for signs that you are saved. Things like spreading the good news from Jesus, getting other people saved, a craving for the word of God, reading the Bible, etc… These things are known as a calling and fruit bearing. If you're not bearing fruit then keep doing it. Sometimes it takes time to get saved. Read Matthew chapter 13 from the King James Bible. God bless!!!
JP, lose the music - Teachers don't play music in classrooms. It's distracting. You're teaching.
Raises hand, what would the recommended configuration be for a 223/5.56 ar-15 rifle be if i wanted maximum reliability? Or to closely mimic the stock full rifle length buffer?
What spring weight for your captured spring system would you recommend with a lightweight carrier?
Use the white one (lightest) It greatly reduces recoil impulse, really nice for 3gun.
Which weight silent capture spring would you recommend for a 10.3 unsurpressed with jp low mass bcg and jp adjustable gas block
tactical renegade I think there are too many variables for someone to answer this? What is your gas port size? How are you going to tune your gas block? Only you can answer this.
10.3 with a low mass bolt? Doesn't sound like the best idea.
I have 2 of your springs
1 in my lwrc m6 di and it works beautifully.
I just recently put one in my stag arms 556 and it appears to be throwing the brass at the one and 2 o'clock position do I need A heavier spring for that one thank you.
JPRifles no it does not.
JPRifles I will do that
Thank you.
You guys are criminals. $140 for $20 in materials, and you charge $20 for additional weights!
Communist
Make it yourself then dickhead. Or don’t buy it and deal with the twang!
They can charge what they think is fair because they made a new product that people like and want to buy. So let them be successful ya douche.
If its so cheap & easy, why doesn't any other company build these?
Well can you make me a few
SantaCruz Sentinel /Santa Cruz Supreme CWLA "who could remember 13?"
does it take glock mags?
Does this work with a 300BLK AR Pistol 9 Inch barrel? What would you recommend for AR pistol use?
I have one in a 300 with a 10" and tune-able gas block and a vg6 love the combo
Jesse Steele what spring did you use
@@Rome_504 using standard spring but ejection is 5 oclock. H2. Going to try lighter spring