Getting Started with Cura 5
ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2024
- Join Roger Bergs as he walks you through starting your first print using Ultimaker Cura 5.0.
00:00 - Introduction
00:10 - Selecting your 3D printer
00:29 - Loading a 3D model
01:21 - Updating your configuration settings
02:14 - Rotating your 3D model
02:39 - Scaling your 3D model
02:54 - Selecting Intent profiles
03:20 - Opening the advanced settings
03:31 - Installing the Settings Guide
03:58 - Slicing your 3D model
04:06 - Preview mode
04:35 - Dealing with overhangs
05:02 - Enabling adhesion settings
05:18 - Sending your model to your 3D printer
Ultimaker Digital Factory: ultim.kr/3LEzeYI
Ultimaker Academy: ultim.kr/3NuPn4l
Ultimaker Marketplace: ultim.kr/3GeMdzh - วิทยาศาสตร์และเทคโนโลยี
I'm new to this, but from an engineering background. Thanks for pitching this just right.
This is so good! Cura is such an awesome tool! Thanks again for making it!
nice tutorial for beginners. one query please, if my X coordinate shows negative value, what it implies about the model?
When I try to download Cura(on both my Fire Tablet and iPhone), it only downloads a file full of what appears to be code. Any idea what the problem is, and why those grey boxes with the "next" buttons don't pop up, that would allow me to use the Cura software?
Thanks!🙏
its reallly great
Any idea, why currently (April 2024), thingiverse offers a higher version (5.7.0) as the original Ultimaker website (5.6.0, even if 5.5.0 is printed on the side)?? I'm always a little bit confused?
Nice to see my name pop up a couple of times at 0:47 haha. :)
I have a problem when I load the STL model the side menu is missing and I am unable to manipulate the model.
Can you please help.
Why I can not set the Z axis 3mm off the bottom? I need this to print in two different materials
There is a script for layer height. SO you can begin a job with one colour and end in another but not to sure about changing materials.
th-cam.com/video/h_Mohd7JLzw/w-d-xo.html
Hope it helps!
How does Cura 5.0 work with Marlin Linear Advance?? Will it work?
I can’t speak for Marlin. But with Duet RRF u can just put the GCode in the printer setup in cura and it works fine.
I also run Klipper and this is done in the printer.cfg so it doesn’t really matter what slicer u use
@@hayden9944 Great thanks, then it's fine
Where can I download an STL of the model?
You can download it from our software page if you scroll down, the model shown is called the Wheel Pulley >> ultimaker.com/software/ultimaker-cura Good luck!
Legendas ou tradução em Português, Por favor
What can it do that Prusaslicer can't do?
WHY MUSIC IN THE BACKGROUND OF A TUTORIAL VIDEO??????????????????
Cura is great! Except that you don’t have pressure advance for Uktimaker printers. U can get better print quality on an ender 3 then you can on S5. Not good enough - get it done.
:)
What happened to the young guy who used to make the Cura videos?
@Roger Bergs haha. Not saying he was better or worse, just curious
And i correct: youngER ;)
Bs that it’s not compatible with windows 8 and being rude to people about it!!!
I have used cura for years and now can’t update!👎👎👎
How did you guys fuk up Cura so badly? I just printed a cylinder and when I sliced it and in the preview mode, there were all these white dots down the back, after printing.. IT LOOKS LIKE SHIT!!! looks like a big messy seam and I did the print at 100% no scaling, 50% infill I NEVER HAD THIS PROBLEM BEFORE!!!! WTF!!! 2 days 12 hours 28 mins WASTED! and one Spool of silk gold PLA 1.75 I AM NOT VERY HAPPY!!
Ender 3 Pro, with BIGTREETECH SKR Mini E3 V3.0 32Bit Control Board for Ender 3, Ender3 Pro,