Len Gordon #15 Air Button

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ม.ค. 2025

ความคิดเห็น • 52

  • @daniel102702
    @daniel102702 5 ปีที่แล้ว +10

    Very helpful video, thanks for making it.
    Heads up though...”Change em all (switch, tubing, button) it’s only a couple bucks.” I just looked them up on your site, “a couple bucks” = $25 for the switch, $21 for the button, $12 for the cheapest shipping. That’s $58.

    • @Gadingy
      @Gadingy 4 ปีที่แล้ว +4

      And? Are you new to adulting?

  • @Bass.Player
    @Bass.Player 4 ปีที่แล้ว +1

    The button on my bath is hard to push and slow to return, it acts like it needs to be lubricated, is there a way to do this or a product to spray on it. It still works fine... (Some times it's harder to push than others, when it's cold it's harder to push)

  • @ggumisme
    @ggumisme 7 หลายเดือนก่อน +1

    Thanks for the education! Now I think I know how to fix this.

  • @charlespatterson9138
    @charlespatterson9138 3 ปีที่แล้ว

    Aweome i came acrossed one of those dwitches and buttons and had absolutely no clue what they were lol just stumbled upon this video now i kmownehat i got lol thanks

  • @josealcaraz8793
    @josealcaraz8793 4 ปีที่แล้ว +2

    Do these work for a Safe step Walk-in tub ?

  • @davefarnsworth3169
    @davefarnsworth3169 3 ปีที่แล้ว +3

    will this part work for American Standard Jetted tub?
    Also I don't have access to under the tub, Is there a way I can still replace this button assemble ?

    • @dhoyt7141
      @dhoyt7141 ปีที่แล้ว

      I also have this question. Can the bellow be removed from the front of the button? I do not have access to the rear of the button.

    • @karasgarlata7775
      @karasgarlata7775 2 หลายเดือนก่อน

      I also have this question!

  • @jillfrye8504
    @jillfrye8504 2 ปีที่แล้ว +1

    Good video. The access to under my tub is on the wrong side. If the air button is stuck, how can I remove the button and just connect it to the air tubing already in place?

    • @donkent1513
      @donkent1513 2 ปีที่แล้ว

      Mine runs and can’t shut it off either , had to turn breaker off, did you get yours fixed?

    • @jillfrye8504
      @jillfrye8504 2 ปีที่แล้ว

      @@donkent1513 The plumber was not able to remove the button and we can’t access on the other end of the tub.

    • @twodollarjomo
      @twodollarjomo ปีที่แล้ว

      Mine stuck on to ,had to disconnect from outlet and I can't access switch does it just pull out and put another one in or what?

    • @jillfrye8504
      @jillfrye8504 ปีที่แล้ว

      @@donkent1513 No

  • @TNTUXO
    @TNTUXO 3 ปีที่แล้ว

    Excellent job....triple play maintenance director.

  • @vincecantrella9951
    @vincecantrella9951 ปีที่แล้ว

    My problem is that the motor doesn’t turn on at all when the button is pressed. What do you think the problem is and what parts do I need to fix the issue? Thanks!

  • @PeterAntonio-ff5zz
    @PeterAntonio-ff5zz ปีที่แล้ว

    The hose not suppose to have water on it or yes?

  • @kinoBot1103
    @kinoBot1103 11 หลายเดือนก่อน

    Can you replace this if the tub is tiled around?

  • @davereeves4232
    @davereeves4232 2 ปีที่แล้ว

    Are these OK to use outdoors? Live in FL and the button is rained and sprinkled on.

  • @donkent1513
    @donkent1513 2 ปีที่แล้ว

    My tub in master bath stays on, have to turn off withe breaker, cannot get to anything under tub. How to change switch without access?

  • @horman921
    @horman921 3 ปีที่แล้ว

    Will these parts work on a Clarke jacuzzi tub?

  • @signitsignsanddesigns2587
    @signitsignsanddesigns2587 3 ปีที่แล้ว

    I'm looking for the links and dont see them

  • @nicmon5214
    @nicmon5214 4 ปีที่แล้ว +1

    Thank you for making this Video. Great info.

  • @SmithBill71
    @SmithBill71 4 ปีที่แล้ว

    Will these 3 units work for a MAAX aerosens soaker tub?

  • @maxd3235
    @maxd3235 4 ปีที่แล้ว

    Thanks excellent video! Helped me fix my broken button

  • @mikerichardson8006
    @mikerichardson8006 2 ปีที่แล้ว

    Just saw your video. My button and bellows seems to be functioning properly and it will 'activate' the air pump to create the jets. However, it will not subsequently 'deactivate' it. IF the button is working to turn it on, and the switch comes on, that seems to me that the system (button, hose and switch) are at least working properly to turn it on. Can't sort out what is keeping it from then being able to turn off. This is on an in-ground pool/hot tub where the hot tub is at least 30' from the air pump and connections of pool machinery. Any ideas?

  • @beverlywaldon2705
    @beverlywaldon2705 2 ปีที่แล้ว

    Why will my hose not stay on my air button?

  • @akoharrey
    @akoharrey 4 ปีที่แล้ว +1

    My bathtub runs for 5 seconds each time when switched on and then stops. Is this switch related given that it starts at all? Any help will do.

    • @worldwidenemesis
      @worldwidenemesis 3 หลายเดือนก่อน

      most likely the air switch on the motor

  • @soa.d.d.7727
    @soa.d.d.7727 2 ปีที่แล้ว

    How can I access my button if the people tiled it in? I tried to pry it off but it won’t budge :(

    • @rj5403
      @rj5403 2 ปีที่แล้ว

      😭

  • @altsworld
    @altsworld 3 ปีที่แล้ว +1

    How do you change them when you can get under the tub

    • @donkent1513
      @donkent1513 2 ปีที่แล้ว +1

      Same problem did you figure it out?

  • @5150drg
    @5150drg 14 วันที่ผ่านมา

    That's actually a digital "caliper". A micrometer has a spindle. A caliper has linear travel.

  • @glenpowers2029
    @glenpowers2029 5 ปีที่แล้ว +5

    Can you remove the bello without removing the whole thing from the tub

    • @ycbuilders4392
      @ycbuilders4392 4 ปีที่แล้ว

      I need to know this aswell

    • @gregoryswelding
      @gregoryswelding ปีที่แล้ว

      Yes you can

    • @dhoyt7141
      @dhoyt7141 ปีที่แล้ว

      ​@@gregorysweldingcan you provide any insight on how to change the bellow with access only to the front of the button? What is the best way to do this?

    • @jerrypender9019
      @jerrypender9019 25 วันที่ผ่านมา

      @@dhoyt7141 I was able to unscrew the whole pushbutton from the top side. i just grabbed the button cover plate with my bare hands, turned it counter clockwise and it screwed right out. It screws into threads which are actually formed into the fiberglass body of the tub itself. The whole button comes out from the top with enough slack in the tubing to pull about 6 inches out of the hole. My house (tub) is 35 years old, and the bottom side of the pushbutton doesn't look anything like the models shown in this video. It looks more like the cheesy pump that you would find in a bottle of spray glass cleaner. Even the tube is the hard poly tubing they use in a spray bottle, not the soft flexible tubing shown in the video. I dont think this button here will work for me.

  • @gmpapostoljuanvillatoro4146
    @gmpapostoljuanvillatoro4146 ปีที่แล้ว

    Awesome explanation

  • @chrischristenson4547
    @chrischristenson4547 2 ปีที่แล้ว

    thank you

  • @timothybutcher6257
    @timothybutcher6257 ปีที่แล้ว

    Cool

  • @glennjulian3711
    @glennjulian3711 2 หลายเดือนก่อน

    Can we call you?

  • @PMBlues57
    @PMBlues57 4 ปีที่แล้ว

    My button is getting stuck? What the best advices you can give on that?

    • @markfothebeast
      @markfothebeast 4 ปีที่แล้ว

      Mine did the same thing. I stuck a screwdriver in there to work it loose. But I have a new one to replace it.

  • @Cricketinfovlogs
    @Cricketinfovlogs 3 ปีที่แล้ว

    Super

  • @BinodShrestha-oo9fz
    @BinodShrestha-oo9fz 10 หลายเดือนก่อน

    I nite Dubai dhat on pumpe suge

  • @iEatWelfareCheese
    @iEatWelfareCheese 2 ปีที่แล้ว +1

    Those are calipers, not micrometers.