How to replace the air switch on your JACUZZI Whirlpool Pump
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- In this video I show how to replace the air switch in a JACUZZI Whirlpool Pump.
The air switch we sell will replace the following versions you may have:
NMC004922000
ZP1521U1
ZP1521U10
ZP1521U1O
700335
TBS-310A
TBS-339
7396000
701435
TVA-411B
178008
in the following JACUZZI PUMPS:
9249000
C847000
H412000
BG94000
Y660000
Y659000
CE35000
7-184307-21
C049000
K796000
9219000
C846000
9248000
HB21000
Here is the link to order the switch:
www.ipoolandspa...
Here is the link to order a new pump:
www.ipoolandspa...
After seeing this video, I just ran the two wires connecting to the air switch to a wall switch to close the circuit. No air switch needed, and I'll never deal with a stuck air button again. simple.
This is the best how to video ever ! Got my switch out without having to remove the pump. Luckily it was super easy access. Gonna buy one of those switches now.
Jet bathtub been out of commission for 7 years . Finally found your video and fixed it . I cant believe it was such simple fix by just replacing the air switch . Thank you so much for this video.
Excited to do the same. I thought it was the motor....not sure ...but this is worth a shot, due to the very well-done video. Thank you. Wish there was a way to see if it IS the motor...guess I'll fix the air switch and see! Thank you!
@@claudiawisdom-good8790 how'd that work out for you?
Thanks for the easy-to-follow video. Got a Tecmark TBS 300 Series Air Switch from Amazon (sorry) for $19 and saved myself $$$ by installing it myself. Great job.
Thank you for taking the time to create and present this, and all your videos!!!!
I had several jets to quit working and thought I would have to call my plumber. When I saw your video I turned them to the left and pulled out on them and they started working! I can love you!
AJ, I cannot thank you enough for this video and your troubleshooting video! I was able to replace my faulty air switch in less than 15 minutes. I would bring you a batch of cookies if you were local.
Glad everything worked out for you. Always here to help. AJ
iPoolandSpaParts.net
@@iPoolandSpaPartsnet hi ! Have a question , it is important the position of terminals or it is the same ? Excuse me My inglish , i'm from ARG . Great vídeo ! Thanks !
Thanks so much for this video of only the screws will come out without a fight lol
Great Job on the videos and content - I was able to figure out what the issue was and order replacement parts and get it fixed. Thanks!!!
Thanks for the video looks simple enough to do.
Thank you for this video. I ordered a replacement air switch from your web site and installed it like the video said and it totally fixed the problem.
Glad it all worked out for you. Feel free to tell all your friends on Facebook and Twitter as well about us. Always here to help anyway we can. Thanks, AJ
AWESOME VIDEO!!! SUPER HELPFUL!!! Bought the switch, bellows, face cover. But no tubing in the box...??? Website and video said it came with the switch for free. Guess not. I think the box packer needs a talking to.
Our son just replaced ours...he watched the video..excellent..except for the 1 side screw....GAVE him a BIT of a hassle...AND he's a BIG guy....And of course...NO easy access...through the closet he went....THANKS!
EXCELLENT VIDEO INSTRUCTIONS. I WAS ABLE TO LOCATE AND REPLACE AIR SWITCH. THANK YOU VERY MUCH.
Thanks James! Glad it helped you.
If you can’t get the screws out with a screwdriver you can use a 1/4” socket driver. It looks like a screwdriver but has a 1/4” socket on the end.
This saved me! Great video! Super easy
Bless you for making this video 😂
Great video thank you! My pump wouldn't turn off so I unplugged it. I thought it was the bellows but I replaced that and still won't turn off. I guess it's now time to replace the air switch
Did replacing the air switch work?
I’m having the same issue
@@Canyaoutty1111 air switch was the problem
I think I have the same issue. Sometimes I have to push the button three or four times to make it turn off. It turns on easy enough but it doesn't turn back off but today it works fine. I'm still going to replace the air switch though because it's starting to fail. This is a great video great. I'm so glad you made it for us. It makes this repair much easier
Very useful video thanks
While easy to do if you can get access, it’s the same price to buy a remote air switch assembly for a garbage disposal or something similar. Mine is buried and removing the pump would be really difficult.
My indoor jet tub doesn't turn on at all
No noise
I have voltage coming off the breaker
What could be the possible problem
I was thinking motor
They didn't leave access in the front bottom
So I'm gearing up for some demo and need some inspiration 😁
Even if you don't reply happy New year
I'll be happy to buy the part off you as well
I seem to have the same exact pump in my jacuzzi, we just started renting the home about two months ago and just started trying to use the jacuzzi. It was unplugged by the homeowners either because they didn’t really use it or because of the issue we discovered. Anyways the pump works great, great pressure and all the jets work however it only runs when the on/off is HELD down. I’m assuming it’s because of air switch being faulty but I’d like your input if possible
Can you switch the bonding lug from the inside side of the motor to the outside side? It look like there's a hole on the other side as well. I don't understand why the manufacturer would put the motor on the side facing the tub, making it impossible to access. Thanks.
My bellows is inaccessible, installed on far side away from access panel. Unless I am missing something I will not be able to replace bellows. The tub insert into motor is right at the access panel. I wonder if I should make a small hole in access panel and install a new bellows there.
Thanks Bro!!!
hi I'm on your website and can't figure out which air switch goes with the Emerson k37Gwble-609. Can you help me out with this?
Hi Can you use this as continuous circulation pump for small above ground swimming pool ? Is it powerfull enough to be feed into small dyi sand filter ?
Hi, I have a DR35959 do you have the switch for this. I looked on your site but didn't see it. thank you!
I want to order, but the link is bad.... please edit or reply with new link?
Question for you. I am a DIY homeowner and am trying to fix my tub on my own. It seems like the button doesn't press anything when I push it in. Then at times, it activates the pump but will only stay on for 5 seconds while I hold the button down and then it turns off. Does this seem like the air switch? And if it does, does it sound like it's in addition to any other part, like the on/off button itself? Should I hear a click when I press the on/off button in?
I know this is a few months old but in case it is needed: Had the same issue and from what I have seen online it could be any of the parts he breaks down at the end of the video. Not an expert by any means but read that it is likely a hole or leak somewhere in the tubing or switch. If it is an issue with the button it is super easy to replace and pretty inexpensive. Amazon has them on different finishes for less than $20, some were closer to $8 if they didn't come with the air switch and tuning. You just pull the tubing out, and there is a plastic nut on the underside holding it tight to the tub. Just unscrew that, replace and screw the thin nut back on, and plug the tubing back in. Unfortunately mine was not the air button so trying this video next but the genius who installed it glued and then foam insulated everything together 🤦 Home Depot had the air button but was $50 to $100 plus!
Any idea where to get that 25UF capacitor?? is the 3 wire setup just a 2 wire run cap with an extra pole?
Which prong does the hot wire hook up to (coming from the plugged in
cord)? Is it the copper colored or the silver colored prong? Does it
make a difference which one the hot wire is connected to?
Please answer!
Robyn; it doesn't matter which prong the hot goes to. All you are doing with a switch is interrupting the flow of current to the motor. Sorry for the confusion.
Good morning i would like to ask u...my jacuzzi the pump was hum and we fix it...but now when is time to shoot the hair...giving trouble just give few shoots...push water out....what can b d cause???
What Tecmark model air pressure switch did you use in this video? I'm looking to replace my Kohler 1154 air pressure switch with a new superior make.
the switchis fine it is the bellows assembly that does not work it does not have a good seal so that I have to blow into the silicon tube to turn it off.
My jacuzzi model 676219 doesn’t shot off
I have the older style of whirlpool and it will not turn off. We use the breaker to turn it on and off. I'm thinking from watching you video that this air switch is what I need to replace?
Don, since you can't see air it might be the bellows too. I suggest you get both to be sure since they're wear items. Call me if you have any further questions. AJ
Can I put 5meters long flexible hose?
I have two problems. First, the pump will not turn off, so I am going to order a new air switch. Second, they never put an access in to do maintenance. How can I know where the pump is located? Are there schematics? Its a jacuzzi brand corner tub. I'm either going to need to cut out tile, or cut access into the side of my house to fix the issue. Thank you
my pump wont turn off either. did the air switch solve the problem?
Just replaced my bellows, and it turns on the pump but the pump does not stay on. Just saw your video, does this seem like it is a problem with the air switch?
I am having the same issue, did changing the air switch fix you problem?
What about some part numbers ?
If the 2 screws on the housing won't come lose with a screwdriver, what is another alternative?
Try using a nut driver and put a large pair of channel locks on the handle for leverage. This method is easier with 2 people.
My jacuzzi pump only comes on while I’m holding the button. Replaced the bellows and the air switch. Still the same issue. Ideas?
Hey there, did you resolve this? I may be having same issue. Thx!
@@sarahleone3564 . I never got an answer. I have just been blocked the button down for now. I think the hose needs to be replaced but haven’t made time to replace that.
Sarah, did you ever figure this problem out?
Hi A J where can I get an air switch ? Like: phone number or some? Thanks
THIS IS JAMES LEE AGAIN. WOULD BE MUCH MORE HELPFUL TO LOCATE A PHONE NUMBER OR A WAY TO ORDER IF THIS INFO IS INCLUDED ON THE VIDEO PAGE.
James, at the bottom of the description area I have the link to click on to order the switch or pump. Which ever you may need. Just click on "SHOW MORE" and go to the bottom and you'll see it. Let me know if you need anything else. AJ
Why not just make simple on off switch?
An air switch is a major safety item for anything that involves water and electricity. There is no chance of grounding yourself to the water and the motor when you are in the tub.
I see no phone number on your website -- what's your contact phone number?