430+WHP Turbocharged 4G69 SOHC MIVEC
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2025
- Today we check out Brandon's 4G69 Turbocharged CK lancer.
Specs :
4G69 2.4L SOHC MIVEC ENGINE
K24 87MM PISTONS
FORGED EAGLE 4G63 RODS
STOCK CRANK
GARERETT T04E 60 TRIM TURBO WITH CUSTOM GT35 FRONT HOUSING AND BILLET COMPRESSOR WHEEL
3 INCH DOWNPIPE AND EXHAUST
44MM TIAL WASTEGATE
480CC INJECTORS
ADAPTRONICS M1200 ECU
AEM WATER METH KIT
This is one car you'll always see innocently cruising on the highway and not know what it's been up to lol.
Thats how it should be lol
Dan you are so correct......Lancer4Life
@@red0357 as the saying goes, lancer is the answer lol
Well it's a daily driver.
Realtalk
Shout out to Brandon, very cool build. I love that you used k24 pistons. I had no idea you could use those in the 4g69.
The wonders of internet lol. But yes, very nice build for sure!
@@danielpersad5789 how can I get in contact with you
430 wheel now pass me on the highway like a regular street car yes. Keep it Lowkey. Keep it Stock🔥
That is d way lol
But it is a regular street car .
@@brandonwhite6334 sure bro, lemme chill in my corner with my lil 105
Lol
We have a lot of respect for this guy... hands down...
Same here!
Thanks much appreciated.
Finally someone do a fully video on ck
Yall asked and I gave lol
日本だとこの型式のランサーを改造する人はほとんど居ないのでとても新鮮な気分です
For sure!
Nice! got a coupe as my first car. Not in a great condition but it will for sure be fun restoring it :)
Yea for sure. They are fun cars for sure!
Sick build, that turbo is bigger than my head lol.
Ha ha yea. Can't wait to see her run again
🔥🔥🔥🔥Alot of stock parts in this boii😂.
Stock parts is the way for them lancer men an them lol
Big red....waiting to see more
Lovely build
For sure
This is sick. Respect the dude
Yea. Proper machine!
Hi dear
Tell me your piston set code
Did you find any trouble with small end width in this pistons
4g63 conrod width is 26.40 mm
K24 conrod width is 19.80 mm
I'll contact the owner and get that information for u and respond soon
@Daniel Persad
Ok I hope not forget
@amrmegahed4309 hey, he is not sure. All the work was done by the machine shop unfortunately
Nice build
Definitely is
Nice car
Yea man!
I have a set up like this in Jamaica 🇯🇲
Nice! What kinda power your setup does?
K 24 pistons did you use the pistons rods from the k24 as well? Or you use the 4g69 rods?
We used eagle rods for the 4g63. Just the pistons were k24
Yes I'm sorry I had to watch the video again and I heard you said it the 2nd time but thanks for your reply anyway
@biglou36010 hey no problem. All questions welcomed!
@daniel I have a simple Mitsubishi CK2 and from the east....can you recommend a good Mitsubishi mechanic....thanks
My dad does that. He's in San Juan. U can reach him at 726-1579. Persad
F5m42-2 gearbox?........ 480cc injectors and getting 400hp? .. duty cycle was what percentage? .. what was the 400hp psi@
Yeah I started lifting an eyebrow when I saw the injector size too
Maybe decapped?
@@johngray5360 oh 🤔kool
@@willis23jm1 yea I think its decanted. Injectors definitely needs an upgrade. This was a mixture of pump 95 an some c16. So that helped alot. I think 16psi gave him 400whp
The injectors are decapped but are currently maxxed at 18psi and need upgrading to bigger injectors I am also running water methanol injection which is helping
hi,nice build i have almost the exact recipe but dont know how many mm is the cometic headgasket can you help me with that info
1.5mm - 2mm gasket would be good .
@@danielpersad5789 ok my main problem is that the pistons touch the head with this gasket resolve this?
to swap using 4g69 on a lancer, is the lancer's default gearbox plug and play? What gearbox does the Lancer above use? please answer thank you
Hey man. So when going to 4g69. You have to use a 4g69 gearbox or a 4g63 fwd gearbox. The 4g9x or 4g1x boxes won't bolt up.
@@danielpersad5789 oh okay, thanks for the information
@@warendraa no problem
I have a lancer 2.4l 4g69 i wonder if i install my power pully will lose power starring , A/C and cooling .... is this mod worthy for everyday driver ..... does it require a different belt from stock ?
I wont recommend no ac for a daily driver lol. And the power gains will be very minimal
Hermoso bro tengo uno igual espero pronto iré para dyno 🤗🤜🤛
Thanks man!
I wanna bring my lancer by yall to build, how can i get in closer contact
You can contact Brandon-310-4162
What year and model ? Whats this car called in canada?
This is a 1998 ck2 lancer. Comes with a 1.5L 4g15 engine but we swapped it out for a 2.4L 4g69 engine and turbocharged it.
Здравствуйте я вам пишу из России. Скажите пожалуйста какая получилась степени сжатия.
Прокладку использовали штатную?
Avg compression we think is around 10:1. we used a 4g63 thicker head gasket.
Can u pls do full video on white sw20 celica
I'll have to work on that. I'm not really that good at reviewing lol. My thing is more working on the cars and getting in some racing. But I will work on it
What kind of lsd is that? Im looking for one for my Ralliart lol
Lol. It's one we saw on ebay
About 450 usd. It works well.
Would this setup work for a 4g69 with Evo 9 mivec head?
Yea it can
What gearbox is being used
This is the oem gearbox and we fitted a onx lsd to it
@@danielpersad5789 is it reasonably available
did you do any modifications to make the 63 headgasket fit?
Yea we did. Had to weld off a oil port on the block as the head gasket didnt have a spot for it. Block was carried to the machine shop after to deck the block.
The 4g63 head has a oil drain port where the 4g69 head doesn't so that part of the 63 gasket it slightly out of the 69 head so I welded that port on the block closed then decked the block.
Nice ride wonder how it would go with awd?
It will be quicker for sure. But he's staying fwd.
@@danielpersad5789 thats not how AWD conversions work.
@@NSPlayer the owner said he will stay fwd. Most ppl we know goes awd but he likes the fwd setup
Awd advantage is quicker off the line.. fwd is way faster once going as less weight n drag.
Awd better for cornering.
@@willis23jm1 yea for sure
🔥
What harness was used for the build?
He custom made his harness to work with the adaptronic m1200ecu
You could get a LSD for any gear box?
Not really. What setup you wanna get an lsd for?
@@danielpersad5789 qg18de
@@darrionsandy9153 Whats the gearbox code?
What engine management?
It's running an Adaptronics M1200 Ecu
How come this isn’t awd?
This is originally a fwd 1.5L ck lancer that we put the 4g69 in. The plan is to stay fwd
What is hoseepower the cars please sir
The car made 435whp 355tq @18psi
@@danielpersad5789 houaa soo good bye sir
What are the specs on the pistons?
It's just off the shelf nippon k24 pistons rated for over 500 hp. Bought on ebay
@@danielpersad5789 I'm planning on rebuilding the engine with those parts. Just bought a ralliart crashed and I'm going to part it out. You got an Instagram account to follow up?
@@janmuniz955 this is my friend's car. I will let him comment with his info so you can reach him as he will have all the specifics
@@danielpersad5789You need to modify the block to use the k24 pistons? Can u use the k24 pistons with a aftermarket 4g69 rod?
Yo dan, how can I get in touch with you?
You can get me at 1-868-356-4483
Is the gearbox 4g93 or 4g92 or 4
It's a 4g69 gbox. Only that or a 4g63 gearbox can work. The 4g9x series gbox has a different bolt up
@@danielpersad5789 ok. Thks
@@cecilschelborn5668 no problem man
Fwd Eclipse and galant gearbox can wrk also..2005 and above gearbox has better gear ratio than ralliart version.
@@willis23jm1 yea true
430whp nrml nrml on the highway passing me inno😮
Yea lol
Tuning files?
What would you like to get?
Bro how much would it cost to turbo charge a 4g15 DOHC
Could be anywhere between 10 to 15k . Depends on if you use new or used parts.
@@danielpersad5789 where u guys located wanna pass n check y’all
@@Mr.Klassik we are Piarco side
@@danielpersad5789 go have to link me ur digits
@@Mr.Klassik sure. 356-4483
Besssssss!!!!
Yea man!
boost by gear
Where working on that as well. Going to test boost by speed an boost by gear. Because the spring is an 8psi spring. And it makes 300whp at 8psi, we may look at going with a smaller spring to help with the traction
Is one Mitsubishi the cars yes ho no sir
Mitsubishi ck2
@@danielpersad5789 kool verie good cars
@@jeancharlesrabaux5658 yes they are
@@danielpersad5789 💪🚗🤠
@@jeancharlesrabaux5658 😁
Ask him how much he pay for lsd
It was around 500usd
@@danielpersad5789 4000 with shipping and wat ratio thks
@@cecilschelborn5668 shipping was about ttd1000.00. This is just the lsd we got. All gearing remained the same as that wasn't changed
Can u post a link to purchase
@@willis23jm1 u read my mind
very nice build
Thanks man
nice build
For sure. Thanks