HOW TO MAKE LOGITECH INVERTED PEDALS DIY
ฝัง
- เผยแพร่เมื่อ 25 เม.ย. 2020
- Hi there! New to the channel? If so, here's what you need to know -- I like ANY games that involve cars, drifting or racing! I mainly play,
CarX Drift Racing, Assetto Corsa & Forza Horizon, so be sure to SUBSCRIBE and hit that bell icon to NEVER miss a video!
------------------------ bit.ly/2VZ7pmd --------------------------
In this video guide you step by step on how to modify and invert your logitech g29 or g920 pedals! Be sure to pay close attention when it comes to disconnecting the wires! This is really simple and can be odne in 10-20 minutes!
If you have any enquiries you can drop a comment or dm me (LINK IS BELOW)
If you are looking for controller GRIPS or SKINS I highly reccommend FADEGRIPS! Be sure to use code 'ANTOZZY' for 8% off!
fadegrips.store/
---------------------------------------------------------------
SUBSCRIBE FOR MORE: bit.ly/2VZ7pmd
---------------------------------------------------------------
Where else you can find me:
INSTAGRAM: / antozzygamingofficial
TWITTER: / antozzygaming
Music produced by: BLAST EZE - เกม
Anyone else hate this song for every TH-cam video out there.?
Oooops👀
This song reminds me of that cringey nostalgia from 2016
nice video , thanks for sharing. you can save 2 holes in the wood it the 3 cables go troguth the same hole and then reach their Pedal individualy
Thank you for this video. You helped me a lot. Greets from Spain.
No problem, Glad I could help!
That's Dope 🔥👌
How long does it take to swap it all over like this?
Your channel is underrated.your my inspiration to start gaming!
Now i saw a vid were the wall where the pedals mount was angled twards you to lower the pedals a bit to be more and a normal driving angle, does how you have it set up feel uncomfortable or unnatural to driving a normal car?
Wondering the same
What’s the measurements of the wood?
Nice one mate! What screws did you use to screw in the pedals to wood?
they have to be M6 screws bro
Thanks bro
Is it really just a right angle(90 degrees)? I thought the angle was more acute like less then 90 degrees? How do they feel? You're work is amazing btw.
Some say 60°, some say it depends but no one really reveals the one true formula for calculating your optimal pedal angle based on scientific knowledge.
5:23 PLEASE DONT SCREW EVERYTHING UP
This may be weird but what did you do with the casing? I really need a new one but I can’t find it online
LOL I
Inverting while keeping the case, is it possible? I mean, just mounting the whole pedal itself on an inclined wood,
With the clutch and gas pedal swap
iutub eraccount I’m pretty sure that you could do that? Might be something I I could look into
Looks like it in the vide. When he takes the case off the pedal units all look the same. I just tried it with mine and I just swapped the gas and clutch pedal assemblies and not I will mount the whole thing vertically to my rig. Thanks for the inspiration video!
Pretty sure you could since the big screws in the back of the case go to the pedals themselves so you could just use washers and longer bolts and mount with those I would imagine.
It depends on the use for example in drifting you need both pedals brake and clutch close to each other so it wouldn't work fi you did that.
hello thank you I wanted this and it's great but I would have liked to have the dimensions of the wooden box in inches or centimeters I will do the conversion thank you greeting from france
The width of the pedal box is 350mm and height is 300 just bigger than the height of the pedal itself I hope this help any questions be sure to ask!
How did you get the spacing for the pedals? I didn't see you measure any gaps or the positioning of the pedals before you removed them to know the spacing.....
My boy coming in hot with the carpentry half / quarter face reveal
Hahahaha😂 you should do this I swear biggest change!😂🔥
@@antozzygaming I already have a setup for my wheel and pedals lol this would ruin it hahaha
Suppose it depends if you have the space but it’s so much better hahah
How big of boards did you use?
450mm x 300mm
and blueprint?
How big wouse the wood peases
450mm for the back, make a 400mm square and cut it diagonally! :)
I've done this and my clutch works but my acceleration and brake doesnt respond at all
You must have the wires mixed up! Swap them over and you should be good to go!
@@antozzygaming I tried that still doesnt work..the wires are defo correct I labelled each one and wrote down which colour went where
@@cornwellharley4458 I sorted it ages ago it was because the earth wire had to be touching metal so I put the earth wire under a washer and tightened it. Works perfect and have been using them for about 5 months now.
or just turn the pedals and the base upside down and screw it to the wall, glue it
can i have the dimensions?
They look too close together. Any scope to space them slightly more apart?
Fat feet. Lol.
MrSi0n I guess you could space them as far as you wanted lol😂 I use heel toe method so I prefer them closer😁
et la moquette?
Y really like the outcome, BUT, wouldnt be easier to just screw the pedals with the rear mounting screws? This way the wires are not exposed, & you can remover it easier, its just my humble opinion tho. Nice work anyways
This was just me during lockdown having a notion that kinda worked😂
@@antozzygaming you know, i was wrong, since every pedal has different stiffness, im gonna get a new wheel soon, then im gonna copy your idea, since its cheap N simply
@@MK-ey6tw you can screw open and swap the clutch and accelerate pedal and its the right way upside down😊
I have two questions? Do they work better like that? And did you remove the rubber piece for the brake?
I find that I’ve more control on the throttle input and also if your on formula style games it’s easier for brake imo, no I kept the rubber piece until I got the upgrade to the Fanatec csl elite pedals!😄
Music is so annoying Geezzz
Why?