These types of builds are the easiest. Look up some that go from total zero. Like parts eg arduinos, transcievers, like what I do. This compared is child's play.
@@aldricksaunders314first define what is the purpose of your drone, is it an fpv or a normal drone ? Then decide what are the features you want in the drone like how much range you would need. If it's less you can settle for cheap rf transmitters otherwise you would need to opt for a bit expensive one.and how much you would like to spend not every one wants expensive High kV motors. Look for help online there are plenty of people who build drones from the ground up like diy receivers, flight controllers, frames etc. And before all of this learn some basics about drones like what a flight controller does. What is KV rating etc. it helps a lot when you encounter a problem. And lastly enjoy the process 😃 it might seem like a heavy work but trust me it isn't that much once you start you will find it surprisingly easy and fun I also started building my own drone recently. In my country drones are expensive as hell. So I decided to go diy, found some online tutorials on how to start learnt some basics then found some resources and started doing it. I used esp32 as flight controller and nrf24l01 pa/lna antenna module for transceiver and an ov7670 for camera and f450 for frame and a 1400kv motor and 8045 size props for code and all I found some online resources and TH-cam tutorials I followed them and made my own version. I encountered a ton of errors but it was fun finding the problem and solving it. Have a great day 😊
Nicee, should be fun project. Keep in mind, you may have to increase the thickness of parts to achieve a suitable stiffness/strength. However, I’m sure you knew that ☺️.
I have 3d printed a few frames I find ditch the flat design go arms half the width but twice the height then you can utilise infill perimeters much better and use a semi hollow frame instead of solid. I usually go triangle shape cross section on the arms it also helps with air flow quite alot having thinner aerodynamic arms and not so flat
Excellent job! Could you upload 3D STL files to, thingiverse, for example? Could you make a list with hardware used (motors, lipo, camera, flight contoller...)?
Don't follow others make your own way. Find any frame some motors and drivers that fits for you, battery, grab electronic and build your beauty. FPV drone not that thing that has best way to build. It's your art, your tool.
@@Ender_P.K Thank you. I already built my own drone just with I learned watching lots of TH-cam videos. When I ask a "list with hardware used" it doen't mean that I just want to "copy" his drone, what I want is learn more. Maybe @BoomBoomJosh used a kind of flight controller that I didn't know or, is he using a 3S or 4S LiPo battery? I always use 3S, if he uses 4S, I would like to know its weight and capacity... just to compare with my 3S, maybe 4S are more efficency... or not... Thank you very much anyway for your advise.
@Ender P.K I would like to know the hardware only so I could get an idea of what parts to get similar. What you said is very true, but I would rly want to know what goggles and controller he’s using
@@sebastiandutoit3246 it's the same thing, just make sure that your motors are the right ones for your battery size ex: 2s, 6s. Get an aio board that fits your frame and get soldering. Really the only difference is that you will want to get a AIO board
@@definingslawek4731 It's like building legos exept you have to precisely solder without shorting components and use advanced software and troubleshoot tons of issues and learn about this different components and wiring and working with batteries and different fpv signals and how to set them up and spending hundreds of hours in simulators and flying to learn how to use them properly. Saying drone building is like legos is like saying drawing is just scribbling some lines down on paper and creating a masterpiece. Btw, how many drones have you built?
@@anub3207 I build drones, I assert from experience that building a functional drone without cold joints is easier than drawing a pretty picture. Drone building might require 7 hours of total practice (of soldering and assembling and such, obviously the full workflow you described is a much longer process, like including simulator time.) to get decent at it and I think drawing takes many many dozens.
The battery protection is brilliant. I just smashed a 2 day old 4s with my quad and it made me wonder why theres zero protection for our packs out there lol
Super cool frame, you gotta try out express lrs, crossfire is too big even on a 5 inch imo. Elrs is cheaper and faster and will take you farther than any 5.8ghz video feed can.
Controller if you can, get the Radiomaster Tx16s Mk II Headset im still looking into but the controller is very versatile and can be used on other RC toys
![24 ชั่วโมง ซื้อของสีเดียว!! [Ver.2024]](http://i.ytimg.com/vi/TNPgzIMr_w8/mqdefault.jpg)
that looks sturdy and not like usual; breakable. well done
Issue is motors get hot, then the arms bend and give the motors camber, I’ve chopped so many motor wires trying 😂
@@jeremym9140 3" quad, what motor size and kv ? there surely must, im sure there must be a way around that to mitigate :
Frames are the cheapest part why bother
@@straydogFPVAlso, what material! Maybe buy something that melts at a higher temp
@@jeremym9140 You could just print it out of a more heat resistant material. PLA isnt much use for functional parts.
Crazy how yall can literally just build shit out of nothing! Mad respect! Wish I had that talent👏🏼
Bro! You could do it as well! I totally believe in you man! If you ever want to try, hit me up and I'll give you help and advice ok! 🙂
These types of builds are the easiest.
Look up some that go from total zero.
Like parts eg arduinos, transcievers, like what I do. This compared is child's play.
Man, it's not talent, I thought I couldn't do it too until I did! It's mainly just about believing you can do it and you can do pretty much anything!
I would love some help or advice on where to start please @brynearson
@@aldricksaunders314first define what is the purpose of your drone, is it an fpv or a normal drone ? Then decide what are the features you want in the drone like how much range you would need. If it's less you can settle for cheap rf transmitters otherwise you would need to opt for a bit expensive one.and how much you would like to spend not every one wants expensive High kV motors. Look for help online there are plenty of people who build drones from the ground up like diy receivers, flight controllers, frames etc. And before all of this learn some basics about drones like what a flight controller does. What is KV rating etc. it helps a lot when you encounter a problem. And lastly enjoy the process 😃 it might seem like a heavy work but trust me it isn't that much once you start you will find it surprisingly easy and fun I also started building my own drone recently. In my country drones are expensive as hell. So I decided to go diy, found some online tutorials on how to start learnt some basics then found some resources and started doing it. I used esp32 as flight controller and nrf24l01 pa/lna antenna module for transceiver and an ov7670 for camera and f450 for frame and a 1400kv motor and 8045 size props for code and all I found some online resources and TH-cam tutorials I followed them and made my own version. I encountered a ton of errors but it was fun finding the problem and solving it. Have a great day 😊
That build is clean!
I make drones from my 3d printer I can make you one let me know.
Can you make me a one but am from Algeria
🇩🇿😅 @@Mya-2022
I love the housing you made for your electronics, superb my brother
This is beyond my old RC mind
Well done bro, people like you are a wicked asset to to our fpv community! Keep up the good work👌
Pretty cool. Might try this with some annealed petg or that carbon fiber filament
Nicee, should be fun project. Keep in mind, you may have to increase the thickness of parts to achieve a suitable stiffness/strength. However, I’m sure you knew that ☺️.
@@boomboomjosh21 can you give us a parts list please a lot of others people would like that to lol thanks
@@boomboomjosh21 can you give us a parts list please a lot of others people would like that to lol thanks
N this my friend is urban art. Well done. I respect the craft. 🙏
Nice work brother keep it up
Amazing build 👍🙏👍🙏
1 sub for this neat clean DIY demo.👌👌
Pretty cool. Wish I had one
THEN GET INTO THE HOBBY OF FPV DRONES
So cleannn
Good build becouse if you break a part you print it again and fixed!😀
Nice 👍👏
Una gran satisfacción! Enhorabuena
Man, I need to come back to 3D printing
You should man, i started during pandemic. Still going strong, well i took few month break as i was moving town.
This build is amazing, Can you list the parts
Awesome🙌
Love it
Would love a part list and stl ❤
Damn fantastic!!
I have 3d printed a few frames I find ditch the flat design go arms half the width but twice the height then you can utilise infill perimeters much better and use a semi hollow frame instead of solid. I usually go triangle shape cross section on the arms it also helps with air flow quite alot having thinner aerodynamic arms and not so flat
Yes. Using a flat design for 3D Printing is not using the full potential/freedom you have, when not using CFK board.
Clean
Excellent job! Could you upload 3D STL files to, thingiverse, for example? Could you make a list with hardware used (motors, lipo, camera, flight contoller...)?
Yeah that would be great!
Don't follow others make your own way. Find any frame some motors and drivers that fits for you, battery, grab electronic and build your beauty. FPV drone not that thing that has best way to build. It's your art, your tool.
@@Ender_P.K Thank you. I already built my own drone just with I learned watching lots of TH-cam videos. When I ask a "list with hardware used" it doen't mean that I just want to "copy" his drone, what I want is learn more. Maybe @BoomBoomJosh used a kind of flight controller that I didn't know or, is he using a 3S or 4S LiPo battery? I always use 3S, if he uses 4S, I would like to know its weight and capacity... just to compare with my 3S, maybe 4S are more efficency... or not... Thank you very much anyway for your advise.
@Ender P.K I would like to know the hardware only so I could get an idea of what parts to get similar. What you said is very true, but I would rly want to know what goggles and controller he’s using
Bro I request you to please forward the reply message
NIIICE 👌
Hey that looks pretty good, first video I saw today and was super chill. Earned a follow good sir🤣
🔥🔥🔥👌👌👌
Love it 🔥
Can we get a parts list?
I would be interested too
there are a ton of videos about building DIY drones
@@ThePoserProductions not too many on 3" quads in spacific tho:(
@@sebastiandutoit3246 it's the same thing, just make sure that your motors are the right ones for your battery size ex: 2s, 6s. Get an aio board that fits your frame and get soldering. Really the only difference is that you will want to get a AIO board
Once a parts list gets posted everything just gets sold out in the first week anyways.
god i wish building drones was that simple
haha yeah, I watched a few build videos again and it's like r/restofthefuckingowl. Skips all the hard parts.
@@mjodr Drawing pretty pictures is so much harder than assembling a drone, it’s basically like legos.
@@definingslawek4731 It's like building legos exept you have to precisely solder without shorting components and use advanced software and troubleshoot tons of issues and learn about this different components and wiring and working with batteries and different fpv signals and how to set them up and spending hundreds of hours in simulators and flying to learn how to use them properly. Saying drone building is like legos is like saying drawing is just scribbling some lines down on paper and creating a masterpiece. Btw, how many drones have you built?
@@anub3207 I build drones, I assert from experience that building a functional drone without cold joints is easier than drawing a pretty picture. Drone building might require 7 hours of total practice (of soldering and assembling and such, obviously the full workflow you described is a much longer process, like including simulator time.) to get decent at it and I think drawing takes many many dozens.
The battery protection is brilliant. I just smashed a 2 day old 4s with my quad and it made me wonder why theres zero protection for our packs out there lol
What software are you using the shows the drone? What about for programming?
yooooo another wowstick enjoyer
nice bro, i like drone
Muito show. Parabéns
Awesome, what's the total cost You can spend on it ??
this is my dream ❤️😔
Wow that cool 😎👍
Looks great and flies great all is well until you crash
where can i find the camera i just need that camera
Awesome little quad! How much does that thing weigh?
Awesome
Agreed 😂
so neat that wow
Sick build man. Got a sub from me
Appreciate it bro, more builds to come 😊
@@boomboomjosh21 what cad software did you use to design this?
@@2J.Racing SolidWorks
Looks fantastic!!! How much does this frame weights?
@@britishpersonfpv6794 I imagine how fragile it might be, but still ,once in a while it is tempting to design and print a frame.
So cool how much did the build cost you?
Robust!
Looks sweet. Link to the stl?
Can you put the links to the products that you used and the stl file please!
You are very good at building drone👍🏻👍🏻
Nice
Hi just wanna ask where do you get your parts like the motors and the circuit boards and all ?
Super cool frame, you gotta try out express lrs, crossfire is too big even on a 5 inch imo. Elrs is cheaper and faster and will take you farther than any 5.8ghz video feed can.
Damn thats a chode if a quad. Awesome
Surprised to not see any cutouts in the airframe for weight reduction
It Flys as good as a paptato
What type of filament do you used for this project?
Okay so this is how I should be making my TH-cam shorts... Noted!
Hello, what 3D printers are best for such Drone building?
Can these be flown anywhere? Like they don't have the DJI restrictions?
What controller/headset would you recommend for somebody just starting out in this?
Controller if you can, get the Radiomaster Tx16s Mk II
Headset im still looking into but the controller is very versatile and can be used on other RC toys
О, це ми любимо.
muito bom .
kd a lista de materiais pra gente fazer ???
I wish had a people give me this quad
How much did it cost?
I Wanna see the LEDs on!
Very cool sir
Could you give me the name of parts that you used please
Cool!! Btw! Whats that tune?
I have a project but I can't do like this
do they sell this as al bundle or can i buy this separately and build this ?
bro so cool
what about programing?
How much did it cost to build this I'm wanting to get into the hobby
Which software is used for simulation
❤️🔥
Yessir
Does the motor heat not warp this? Also can you please list the parts
Cool little project but realistically a carbon fiber frame will be better
Depends how you fly, but yes, definitely nothing beats a CF frame ☺️.
track id? Also sick build.
Neenga vera level ...I mean you are amazing ....Great Job and Hobby bro
What’s the range on the antenna?
I Want One^^
Which receiver did you use
Ah yes, a 3d printed, bottom plate design plastic frame. Surely nothing goes wrong here
Is that the PRG repair mat?
Yeah, picked it up from a local computer store 🙂.
@@boomboomjosh21 nice
Why not mount the battery below the frame?
Could you please share the building process and parts buying guide
What 3D printer is that?
What software do you use ?
❤
Was the size pf the nozzle on the printer .2mm?
😍😍😍😍
Is that capable carry some weight?
What filament used for base frame?
Which flight controller is that
Can you leave a link to the 3d file to print I’m looking to make my own
What do you solder to the battery connection & board? Is that a capacitor? I will need to order both of those parts in order to finish my build!
I soldered a XT30 female connector and 35V 470 μF capacitor
Which motor and esc is this
can we get a partslist and how to guide
how much did the parts cost?
can you please share the STL files? and make a tutorial on how to do that? thanks.