ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Setting up a Zumspot with attached 1.3 OLED Screen and Pi-Star image
ฝัง
- เผยแพร่เมื่อ 8 ม.ค. 2019
- I demonstrate hor to setup the Zumspot version .6 board with pi-star image. This is one of the nicest hotspot you can get from www.hamradio.com.
link to firmware, pi-star updating. • Updating Pi-star image...
I just got mine and thanks to your video, I am up and running with no problems. Thank you for posting this video.
Great video Don. You solved a couple of config questions I had on DMR and also a bug that cropped up last night when my existing config got corrupted and I lost the video screen. You ROCK!
Thanks for posting this video. Picked one up on a trip through Atlanta, and this step by step was great. Helped set it up easily. Much appreciated!
Wow Don, 3:30 in the morning wife walks into office and says STOP!! Putting it together was no problem, then I spent the next 3 1/2 Hours cussing and yelling at it because it would not work. Kept googling and no luck. Finally did what I should have done in the first place came here and your's was the 2nd video I watched had it up and running about 30mins later. Still have to setup radio but I feel much better now always thinking what did I miss? Maybe I accidently broke the screen, I knew I never touched it! Was a great relief when it started and then flashed the D-Star Logo. Will get back to it Monday going away with wife and after this night od horror she deserves it! 73, K9HDT
I just can:"t thank you enough for this video. I had my hotspot for 2 weeks and could not figure out how to open the raspberry dash board and I watched alot of videos. Some how I just understood your instruction and set up my hotspot. Thank you
I don't know how I missed this. Thanks!
Hi Don. Awesome video. I have my Zumspot, ordered a case and am getting an Icom ID-4100 as I will be using it at home. Great info and also watched the update video of firmware and, no doubt, will be watching again. Very much appreciate the quality and explanation of exactly what you are doing.
Thank you. KK7XE
Cannot thank you enough!...got it set up and immediately made a QSO. Made it easy even for a non-techie old man like me. de N8XM
Thanks Don this is a great video and I appreciate the time you took to record this one!! 73, de W3EME
Very Good video, walked me right through without a oops.
Great video. I've been trying to decide which option to go with. You just settled it for me. 73 N4JJP
Don, best pi-star set up for DStar I’ve seen. Thanks for your effort to help us “noobs”.
73s de N4UQY
This VS Open spot ? I'd think I'll to the Open spot. This Zum just looks way to old school and sees REALLY slow. How many times did it have to reboot? 5?
Hi I have the Radio TH74d and Zumspot all set up and seens to be working. However no contacts or audio. when i PTT the Radio the Zumspot iights flash and the Radio has the green screen?
Thanks, best explanation EVER. I was lost. 73s.
Man you made it a breeze. Hamradioconcepts has a video that I tried to follow and was lost immediately.
Thank You!
Only question I have is my default REF is 30c for the pi-star. With my id51a I tried to unlink and change reflectors but it won’t!
Do I have to change default REF in configuration every time?
nice video Don thanks 73 for you help good luck
Hi, this might be a dumb question, but can this be used with an analog radio or does it have to be a digital one ie d-star, fusion, dmr, etcetera. Thanks.
I got a jumbospot, basically same thing, it's a pi zero with an mmdvm hat in a metal case. I got it but the instructions don't show anything about connecting to it or configuration. All the videos I've seen they are using a PC and don't show how they connected to it. I don't have a PC. I only have an Android phone.
What are the advantages of this device. I am new as a seed in the ground and the ground is a desert
How does this device compare in performance to the Shark RF Open Spot 3? I've been thinking about the Open Spot but it's so expensive compared to this...
Question: To start out with Didgital Radio...What is recommended for what HT to buy. Do i go with China Radios or spend the money on name brands.
I cant finish programming mine the fields in the wifi area won't display the wifi network names.
Where is the tutorial on D-STAR registration, entries and setup for your Zumspot??
Says pi star website unavailable because it has no internet???
can you connect more than one radio to the zumspot? I have the id51 and the id5100.
Pi star refuses to connect to the setup screen any thoughts
Got to 12:40 on the video. "This is where, if everything is working right..." but apparently not everything is working right. I put in my Wifi password (double checked on a laptop), clicked "Save (and connect)", and rebooted the hotspot. It won't connect to my wireless network. Now I can't seem to reconnect to the pi-star wifi hotspot to reconfigure the WiFi section. Can I tap into the HDMI output and use a USB keyboard & mouse to get into the config?
Disregard, I removed the SD card and inserted it into my ChromeBook. From there I was able to save the wpa_supplicant.conf file back to the root of the boot partition and it connected to the network. Thanks for the video!
So how do you pick a frequency to use?
can not get it to work. it sees the internet, broadcast to my radio but does not hear my radio. tried to set offset gone from 250 to 10000 both + and -
Negative offset with 0.00? That flies in the face of all prior logic. Why is it required or is it a Kenwood thing? My MD-380 worked fine when I used a simplex frequency on the Jumbospot. (Same thing as Zumspot just a DIY version) Just wondering how the hotspot knows the difference.
It is not a Just a Kenwood thing but also for Icom The Pi-Star in Dstar mode needs to see this.
One more thing this was done primary for DSTAR and I don't own a DMR radio..but for DSTAR and PI-Star you need minus shift and 000 offset
Still not sure why you'd put the Node Type to Public? You would be responsible for everything that goes through your node and compromise your Wifi Security. Why? On a positive not I want to give credit where credit is due. The step to reboot vs shut down helped me clear a problem I was having with a Jumbo spot. Thanks.
They need to call it the G-spot so my wife will let me buy it.
do you have to solder, putting the boards together?
1MinuteFlipDoc I don’t think so
nope
My screen shows white with a bunch of black dots
I cant get pi-star to show on browser
Why did you not put a link of which kit to buy in the description of this video? Also where to buy this kit from?
HRO and he gave the model numbers. Call Mark or anyone at HRO Atlanta and they can steer you correctly.
Google
Thank you for the input I will add a link tonight also a link to the firmware update
He said in the video he got the kit and case from HRO - www.hamradio.com/detail.cfm?pid=H0-016491
I think they are over priced good units but pricy
Trump 2024
I dislike this. It doesnt work on my FT400