Such a pleasure watching your craftsmanship and workmanship! Producing a true QUALITY product from Good Materials! Not that crap that is sold in big box stores and online at overinflated prices, mass produced overseas. Always Dress Right Dress, ALLEN! Thank you! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️
Allen made one of these for me, I can vouch it is the best grill I have ever used. Cannot recommend enough, built like a tank. We do a lot of wood fire grilling on it and it’s perfect. Our fire pits he made are sweet too. Going to have to get him to make me a reverse flow sometime in the near future
I been watching and subscribed to you back when you was working outside of the house before the 55 gallon drum blew up and this is the first video I’ve had recorded since you started working in the new shop.
Me and 3 friends drove from MI to LA to pick up 4 of Allen's Santa Maria. We had a couple of upgrades requested that Allen did for us with an upcharge. We had him split the grill surface into 2 - 24" X 24" sections (our grills are 48" wide). Also had him put a larger pneumatic caster on for easier rolling across grass. We all love ours! A couple of other things I did when we got home, that others may want. I took out the lower grate (for wood/charcoal) and the slides that held it. I then put firebrick across the whole bottom. Easier to maintain fire, insulares and preserves the bottom of the grill and uses less fuel. If you are going to use it fully I recommend as that much charcoal/wood gets HOT!!! I pinned my laser thermemeter over 1,000 degrees. That begins to warp metal. The firebrock stops that. Thanks again Allen, and as I've said before...raise your prices!! You are too inexpensive for what we get. ...oh, and one last thing...I wish I would have had Allen do fold down on the shelves. Worth any extra $$.
@@gayanathaponso5158 I don't think that is necessary, at least for me it has not been an issue. If you want, I can email you pics of mine. If you go to my channel, go to the about page and you can get my email address there.
1st thing is you flipping rock and I appreciate your work! 2nd thing brother roll on that concrete sealer on your floor! All that fine dust goes away. You'll be very happy!
Great built Allen, I have built a couple of those grills myself, bit different than yours . Every time I see you weld you don't have any gloves on, man do you want melanoma cancer from the UV light ? At least put a tig glove on your off hand, I would hate to see you fade away with cancer a few years down the road. You don't think about it now, but do so before it is too late. Everybody thinks it won't happen to me but remember anything can happen to anybody at any time. Put a glove on and wear some sleeves, don 't want to hear you got cancer. UV and HV and RF light from hots welds will do you in. Be safe rather than sorry because we really like your work.
Hi Allen, Do you clean off the mill scale before you start welding? If so what do you use to clean it off, if not do you need to make adjustments on the welder to compensate for the mill scale?
Haven’t been watching for a bit. Glad to see you moving up with the shop. Well done.
Awsome work Allen
Another great product Allen.
Such a pleasure watching your craftsmanship and workmanship! Producing a true QUALITY product from Good Materials! Not that crap that is sold in big box stores and online at overinflated prices, mass produced overseas.
Always Dress Right Dress, ALLEN! Thank you!
⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️
That’s a beautiful grill💯
Love the stuff your putting out Mr. Allen. It always looks great. Videos very entertaining and informative. Look forward to the next one.
Awesome skills, Allen. Very nice work.
so good to see your new shop up and runnin and you workin on concrete.
Allen made one of these for me, I can vouch it is the best grill I have ever used. Cannot recommend enough, built like a tank. We do a lot of wood fire grilling on it and it’s perfect. Our fire pits he made are sweet too. Going to have to get him to make me a reverse flow sometime in the near future
got a 4' x 24" hexagonal grill from this fella. couldn't a been happier with the build. drove down from Chicago to pick it up. nice guy
Yet another great video . Keep going Allen these are just brilliant . Looking forward to an up to date break down build on the grill . Thanks
Awesome Build as always, Allen. I'm in the process of building my own. Can't wait to see the detailed build.
Nice build!
Great craftmanship 👏
Your a great fabricator. Also a good way to relieve stress.
Just amazing. Thanks.
nice build
Nice job! 🙂👍
I been watching and subscribed to you back when you was working outside of the house before the 55 gallon drum blew up and this is the first video I’ve had recorded since you started working in the new shop.
Your new shop looks awesome.
Thanks!
Nice work as always. Hope to see you soon
Nice build, I glad your doing well, been along time since I seen one of your recent videos, gotta catch up, 👍🏾👍🏾
Awesome
You legit have the best job. Welding all day and I can only imagine the amount of bbq you get
Me and 3 friends drove from MI to LA to pick up 4 of Allen's Santa Maria. We had a couple of upgrades requested that Allen did for us with an upcharge. We had him split the grill surface into 2 - 24" X 24" sections (our grills are 48" wide). Also had him put a larger pneumatic caster on for easier rolling across grass. We all love ours! A couple of other things I did when we got home, that others may want. I took out the lower grate (for wood/charcoal) and the slides that held it. I then put firebrick across the whole bottom. Easier to maintain fire, insulares and preserves the bottom of the grill and uses less fuel. If you are going to use it fully I recommend as that much charcoal/wood gets HOT!!! I pinned my laser thermemeter over 1,000 degrees. That begins to warp metal. The firebrock stops that. Thanks again Allen, and as I've said before...raise your prices!! You are too inexpensive for what we get. ...oh, and one last thing...I wish I would have had Allen do fold down on the shelves. Worth any extra $$.
Yeah i plan on picking one up from Allan. I wad thinking i may want the sides a bit higher to fit the firebrick.
@@gayanathaponso5158 I don't think that is necessary, at least for me it has not been an issue. If you want, I can email you pics of mine. If you go to my channel, go to the about page and you can get my email address there.
1st thing is you flipping rock and I appreciate your work! 2nd thing brother roll on that concrete sealer on your floor! All that fine dust goes away. You'll be very happy!
Great built Allen, I have built a couple of those grills myself, bit different than yours . Every time I see you weld you don't have any gloves on, man do you want melanoma cancer from the UV light ? At least put a tig glove on your off hand, I would hate to see you fade away with cancer a few years down the road. You don't think about it now, but do so before it is too late. Everybody thinks it won't happen to me but remember anything can happen to anybody at any time. Put a glove on and wear some sleeves, don 't want to hear you got cancer. UV and HV and RF light from hots welds will do you in. Be safe rather than sorry because we really like your work.
Old timer at my work is 73 and welds in a shortsleeve shirt. All depends on your body
Is it better to work, and build in a VERY nice shop, from the old mud and rain? LOOKS good, keep up the great work!
Hi Allen, Do you clean off the mill scale before you start welding? If so what do you use to clean it off, if not do you need to make adjustments on the welder to compensate for the mill scale?
Question: How do you prepare the expanded metal to be cooked on?
Il migliore the beast my preferit
hi Allen can you show step by step how you built the front door ?
I have a few videos up showing how to do it
Have you made a full film on this build on how you did it?
Yes, they’re several videos of them
👏👏👏🙏 God bless
Is there any way I could get a materials list from you for this grill?
Allen
I would like to have this
Were are you located
Where are you located?
How much is it?
hi what size steal you use for these bbq ?
You could use any size that you wanted
Are these powder coated.?
No
Do you sell this grill or do you just make it for yourself ?
I sell them.
@@Allensweldingwoodworking can you please give info where to buy it, price, shipping etc. I am interested in one. Thank you
You can email allentubbs31@gmail.com for orders
Do you sell these? Amazing !
Thanks, you can email allentubbs31@gmail.com for orders
By any chance does anyone know what type of welding he is doing
Mig welding
@@Allensweldingwoodworking thank you very much, I am making a Santa María grill in my class can’t wait to start finishing it
Do you ship to Boston, Massachusetts?
Cost!!!
This guy sounds like boomhauer
meke mi 1 i en houston tx
I just heard the alarm going off sounds like the Russians are incoming 😉🇨🇦
How much $
The 40”/20” is $700
@@Allensweldingwoodworkingare you in Melbourne??
@@BlackWhite-pp6rm no
No chemical cleaning on metal to eat from or cook on? Wow