Greetings from Cape Town! I am so Jealous... I have been following Allen for over a year now... I would LOVE to have this World Class Fabrication in Cape Town.. I Need this Off Set... or... anything that Allen makes
I started welding by accident , been welding now 40 years , It's not that hard , I was taking Auto Mechanics , Something needed welding and I was elected , I can Arc and Mig and fabricate , design and build .
@@atholwilliams3583 , Nothing fast about Welding , watch any good Welder , No fast movements , Slow and Easy , You watch 4 things , Where you been Where your going Where you are And your Puddle But beginners like to watch the Arc
Allen i love watching your work huge fan. Would you wear some welding sleeves if I send them to you? An old timer i work with is getting chunks of skin off his arms removed from skin cancer. I know it sucks because they're hot but man I don't wish that on anyone.
Do you have a plate inside of the grill area that takes the smoke to the other end before it goes out the stack?? It is a Damn nice pit!! The fire box gave me some ideas for mine. Thanks
Hey Allen! I'm fabricating a Santa Maria grill right now and I'm wondering what kind of paint you use to finish it. I'm looking for something heat proof and food safe.
I like that 24 inch size I still want you to build me a reverse flow in 24 inch I need to sell the Rich Bastard first though I will put it up for sale soon and let you know when I’ll send you the deposit for it Thank You!
Hey Allen, when these door locks with the red handles are fitted to the front door, they are in my humble opinion in the road and likely to catch on things. Is there no way that you could fix them the front vertically below the shelf so that they were more inconspicuous. Plus, they would be stronger not being fixed to the two ears at each side.
I understand that they may not necessarily be required and are there as a matter of personal preference. I was merely suggesting that when they were requested by a customer, they could go downwards that would save making a bracket to hold them as they could then be fixed to the lower front panel. sure, it would be a bit difficult to fit around a full-length shelf, but I am sure they could be esily adapted. I was thinking of your time in making up and fitting the brackets (ears) that would help speed up the manufacturing process.
It's called a reverse flow smoker. There's a diffuser that redirects smoke and heat. They actually help with heat distribution! Look them up! Check them out!
It’s actually the best design out there! A reverse flow smoker has a baffle in it where the warm smoke comes out of the fire box, travels the full length of the smoker till it reaches the end of the baffle, then rises up to above the baffle and then has to travel the length of the smoker again towards the firebox and out there stack. It gives you the best heat distribution your gonna get from any cooker out there, they are awesome!!!
@@Allensweldingwoodworking I live in San Antonio Texas. What’s the best way to get the fire pit here.? What do most people do.? Can I just pick up or do I need to preorder.?
That’s one bad ass grill. Nice work
Very nice work, have been following your channel for over a year…have learned to appreciate what fabricators like yourself do. 👍🏼👍🏼👍🏼👍🏼
Dirty hands, clean money!
This is the second time in 2 days, I have seen that phrase!
Greetings from Canada...eh...
Nice work looks good!.
Its all about supporting the working man, keep up the good work.
doctor slick Wheels ain't no joke they roll like butter
Love it Allen! You do fantastic work brother. 👍👍
As always you do great builds.
That looks great, as always you make it look easy.
You are a true artist!
If you don't mind me asking how much for this Smoker? This is exactly what I want. The perfect size.
I never new I needed one of these till now
AWESOME video Allen . I give you a lot of credit your work is great. Thank you Frank from montana...
I know I've said it before but you are one heckuva fabricator
You do great work sir
Wow that's a beautiful BBQ /Grill ,5 Stars Buddy ,thanks
Great looking grill
Love that fire 🔥 pit she’s a beauty.
Another great Job Allen always enjoy the way you explain everything you make it look easy keep up the great work.
Boy is good!
Great work Allen 👍👍😉😁✌🇺🇲🇺🇲🇺🇲
Greetings from Tripoli,,,
Fabulous job Allen's .
Very nice craftsmanship
Man that's a nice one. I would love to have one in my back yard for a big BBQ get together. Good job👍
Good stuff brother. God is good keep up the good work!
awesome dude
Nice work bro
Where are you located
That's art
You are an extremely talented man. I will be a customer very soon
Allen you do amazing work man! Would love to see you build one out of a propane tank
Any "Welder" can do that. Allen is a Fabricator/welder. Most people do not know the difference.
Nice style brother. I'm trying to do the same
Great job! Your making my fab skills at home go a long way. Now when the wife asks for a honey do I'm thinking, can I make this out of metal?😄
Wow the latent on this guy is insane.
Greetings from Cape Town! I am so Jealous... I have been following Allen for over a year now... I would LOVE to have this World Class Fabrication in Cape Town.. I Need this Off Set... or... anything that Allen makes
I started welding by accident , been welding now 40 years ,
It's not that hard ,
I was taking Auto Mechanics ,
Something needed welding and I was elected , I can Arc and Mig and fabricate , design and build .
@@jimthomas777 .. good comment. I am inspired.. with Allen it all looks so easy.. maybe I too should at least TRY.. Baie Dankie
@@atholwilliams3583 , Nothing fast about Welding , watch any good Welder , No fast movements , Slow and Easy ,
You watch 4 things ,
Where you been
Where your going
Where you are
And your Puddle
But beginners like to watch the Arc
Allen i love watching your work huge fan. Would you wear some welding sleeves if I send them to you? An old timer i work with is getting chunks of skin off his arms removed from skin cancer. I know it sucks because they're hot but man I don't wish that on anyone.
Awesome work man I just found your channel and can’t stop watching. Do you insulate your smokers?
Do you have a plate inside of the grill area that takes the smoke to the other end before it goes out the stack?? It is a Damn nice pit!! The fire box gave me some ideas for mine. Thanks
Hey Allen! I'm fabricating a Santa Maria grill right now and I'm wondering what kind of paint you use to finish it. I'm looking for something heat proof and food safe.
Allen I made a short extension with two 220 boxes on it. Plug welder and plasma cutter into it. Works great.
But one at a time right? Was thinking of doing same thing but only with 230v 30amp.
@@boriskarloff598 yes use one unit at a time. Unless your talented and have a mig gun in one hand and a plasma torch in the other 😆😆
Excellent work. Question. In the 2nd one. Does the food grate stay balanced as u put food all around it?
if you have a close look you will see the piece that slides up and down is guided
How much do you charge for one of the Santa Maria grills? Where about are you located?
How much for that first grill in the video??
What are the pits and Santa’s going for ?? Great work 👍🏾🙏🏾
$500
How much is a fire pit like that and can you ship to Comifornia? Thank you sir
Nice Santa Maria style Pit. What's the cost for one?
I’d like to get one of the Santa Maria’s also. Is there a long waiting list for one of those Allan?
I like that 24 inch size I still want you to build me a reverse flow in 24 inch I need to sell the Rich Bastard first though I will put it up for sale soon and let you know when I’ll send you the deposit for it Thank You!
How much for that last grill
Hey Allen, when these door locks with the red handles are fitted to the front door, they are in my humble opinion in the road and likely to catch on things. Is there no way that you could fix them the front vertically below the shelf so that they were more inconspicuous. Plus, they would be stronger not being fixed to the two ears at each side.
It doesn’t need the clamps, they can be left off if someone wants
I understand that they may not necessarily be required and are there as a matter of personal preference. I was merely suggesting that when they were requested by a customer, they could go downwards that would save making a bracket to hold them as they could then be fixed to the lower front panel. sure, it would be a bit difficult to fit around a full-length shelf, but I am sure they could be esily adapted. I was thinking of your time in making up and fitting the brackets (ears) that would help speed up the manufacturing process.
BADASS. FUCKN SKILLS
Time to open up that Pro Pulse 200 and blow out the dust, partner. :)
Allen, does having the stack on the same side as the chamber box effect the heat on the other side of the chamber?
I was wondering the same thing. I've never seen one like this before.
It's called a reverse flow smoker. There's a diffuser that redirects smoke and heat. They actually help with heat distribution! Look them up! Check them out!
It’s actually the best design out there! A reverse flow smoker has a baffle in it where the warm smoke comes out of the fire box, travels the full length of the smoker till it reaches the end of the baffle, then rises up to above the baffle and then has to travel the length of the smoker again towards the firebox and out there stack. It gives you the best heat distribution your gonna get from any cooker out there, they are awesome!!!
Does the table get warm or hot when it’s attached to the front of the cooking chamber?
Not really, I’ve never noticed it on any of mine
@@Allensweldingwoodworking awesome thanks my friend
Did you box up and send back your other plasma cutter yet?
I’m sending it back next week
Bet that takes forever to cool or keep cool
How much for smoker. Sweet build.
It is $2000 built with 1/4” steel
What kind of paint did you use?
Most likely rustoleum high heat!
How can I order this one? And what is yours asking price? You sir do awesome work
The first one in video that is
@@BillRodgers2 his email address is on the description of the video.
@@armandoa5468 thanks
Hey Allen what up
Hello 👋 plz send me the info on how to order the fir pit showing here on this video thanks take care
Email allentubbs31@gmail.com
Who melted the siding?
Haha! It’s been that way for years, since I’ve been here, I’m finally fixing to change it because I’m moving soon
What’s the price on the Santa Maria pit Allen? And where are you located at.?
It is $450, Rodessa Louisiana.
@@Allensweldingwoodworking I live in San Antonio Texas. What’s the best way to get the fire pit here.? What do most people do.? Can I just pick up or do I need to preorder.?
How much do your pits start $?$?
Smokers start at $800
How much is something like this, asking for a friend 🤔
The fire pit is $450 and smoker is $2000
Hey I just wanted you to sell me one of those how to get an order
How can I get a hold of you
Email allentubbs31@gmail.com for orders
I don’t usually say this to men but bro…have you lost weight? Lookin healthy bro. All that manhandling steel is paying off