This is what I want in someday. I want my PC to be in a different room with a team of people working 9 to 5 to keep condensation down on a crazy overclock while I game in silence.
Linus attends a funeral Linus meets some old friends Linus’s friends mourn Linus be like “You know what else is sad? The fact that you guys aren’t using SQUARESPACE !”
my friend did the same to me making my custom pc. i only had a rgb strip before and he was like like i cant disable the rgb. because its built into everything. then smiles. i was like u asshole.
ı love anthony. Dude that guy feels like a character that was spawned from the the depths of OC Forums. Please can someone tell me how Anthony came to be working for LTT
He’s been at LTT for a long time, but he has all this experience with hardware because he used to be a hardware technician for BestBuy. I agree with you though, Anthony is like the big daddy of LTT
If you are running two 1000W power supplies and your voltage is drooping below 120V you are pulling too much power on a single circuit Distribute the load across two different circuits Also make sure your test bench isn't on the same circuit as something using a lot of wattage (ie those giant coolers) If you are doing something as nuts as this you should have a dedicated circuit to your CPU PSU, a dedicated circuit to your GPU PSU, and a dedicated circuit for the coolers You also want to be careful of hooking up a 1000W power supply to a really long low gauge extension cord, the longer the cord the higher the amps, it will over heat the cord, and cause voltage droop Get at least a 12 gauge 3 wire and run it at just the right length Having your voltage droop was probably what gave you guys so many OC issues, if you tried to push the clock after getting the electrical sorted you might have been able to push the system further
don't know how it is in canada, but in germany we have like the average 230V power, which is your 120V i guess, but we also get at least 1 connection of heavy current 3 phase 400V for ovens. building a small transformation panel to get that 3 phase 400V down to your average 120V you could pull crazy wattage from there. Or get a UPS which inputs the 3 phase power and got multiple 120V outputs.
@@richardlange134 I'm sure since they are in a commercial building and require enough power for the servers and computers that they have some sort of three phase box I just assumed they only had 20A circuits Any Joe schmoe with 20A circuits could distribute the load
Yeah, but they want to lock it to a higher power state than what the resistor allowed. So they would have to put in a different resistor. But I guess at that time the whole rig had become such a franken monster they did not want to disassemble, put the resistor, reassemble, test - only to find out it does not work. I think what Anthony meant was that he could lock it temporarily and test it and if it does not work try different power states and see which one works. Changing resistors for that would not be feasible.
As another sort of iteration of scrapyard wars, you should do OC wars, everyone has the same parts but has to find the best stuff to overclock any way possible! That sounds super interesting, at least to me!
Sounds great but what if the silicon lottery picks the winner? Would be great to watch but with a predetermined winner so most likely won't happen sadly 😕
theres gotta be some kind of lesson to learn here... seriously? THEY ARE RUNNING THEIR CPU SO COLD THEY DECIDED TO USE A HEAT Gun on it! I just thought of a solution.... why not intermittent cooling? or just wait till it starts to heat up.... 3 minutes even?
@@Dr.Spatula I like that idea, although i havent seen what ur talking about with the dry ice, however just the copper coil could definitely solve this issue.
@@Silhalnor More conductivity. The dry ice doesnt melt, it sublimates and its much cooler than ice. Downside is you cant circulate dry ice so you have to physcially add more to it. The real answer is an actual refrigeration system aka air conditioner for your computer using a compressor, condenser and evaporator
@@lehelveibel5871 yeah well its a fine card (except on this particular one the fan is broken (only runs from about 1000rpm, doesnt work under 1000) and the driver utility doesnt work correctly, although that last one could be my windows being broken). im pretty sure its almost the same as the xbox one video card
Wait....OVERCLOCKING ROOM ? filter the air inside the room to remove all the humidity... That's actually an incredible idea. as long as chiller is...well...closed
0% humidity is impossible if there is anything with moisture is would have to be more of an over clocking box that the computer goes in and the water chiller goes outside
Anthony actually sounds like he knows a fair bit of more the really technical side. Not bagging Linus for once but every team needs someone fluent in that field and also Linux and script writing/editing.
Anthony's been a great addition; he acts as an excellent foil for Linus who can get overcome with enthusiasm. Anthony is the calm voice that knows how it actually CAN be done to make these crazy ideas a reality. A good team, and certainly more bearable than Linus on his own.
Linus is like Elon musk, great marketer business man who hires people who know more in fields he doesn't; Linus is still a genius and probably knows more about in any - one subject than we do
@@sokolaad1238 OOF, yeah, he was rubbing his hands, waiting that some fool buy it 10 times over it's original price. like what, the 700 euro rtx 3060 aren't that high...
Anthony: Okay pretty stable around the thirti- Linus: It's clean Anthony: I haven't even seen it spike to thirty fi- Linus: *It's clean* Anthony: Linus: *I T S S T I L L C L E A N*
Just pointing out how easy it is to tell you're a little boy by saying things like "k?" and "triggered" Go back to your Jake Paul videos and leave this stuff to the adults.
@@felixarkang5414 We dont need them to see the difference in quality. The only thing where the 2080 ti is better is in terms of vram. (just has more) But games dont really use that much soo...
14:40 "You can see how wet our CPU is" Dude, I just watched a video where Alex and Ryan put mustard, toothpaste and vaseline on the CPU, then then washed the CPU off in the sink. And you're worried about two drips!? :)
@ It's done in a rig that's can be used for many different setups. They'd have to create a new rig for only that one thing that you typically do once or twice a year at most. The time and effort invested would be astronomically high compared to the incovenience of having to hold fans for a few minutes. Not to mention that while you're working on the custom rig, everything is inverted which in itself would be either weird or simply impractical. And then again, you have the fact that the method would not solve the problem with moisture.
The entire process is wrong in almost every conceivable way. You should NEVER do this under any circumstances to your graphics card, particularly a 1500 dollar one.
he was using it to reduce condensation on the board. if youve seen some do ln2 overclocking they aim a heat gun directly at the vrms of the mother board. maybe not vrms i forget. but they aim it at a portion of the mother board to keep it from condensating. you only want the cpu to be cool you want the rest of the board to stay warm. you just dont aim it at the cpu
The more that I watch videos with Anthony, the more I realize that he is one of the most knowledgeable guys there, imagine if he was a part of the team in the early days
Anthony's voice is like music to my ears and somehow my cheap G935's suddenly are sounding like HD800's wtf. He is really gifted man because when he talks I am stone still not moving at all - he really knows how to pass an information - I never had to rewind or repeat anything he said! Great guy :)
Copper is a better thermal conductor than aluminum. Silver is a (marginally) better thermal conductor than copper. You know which material blows them both away? Graphene. You know what is close to graphene's thermal conductivity, but FAR cheaper? Graphite. 1. Build a graphite heat sink, designed for horizontal installation, with walls to act as a liquid reservoir 2. Nebulize a coolant (i.e. distilled water and/or pure alcohol, kept just below vaporization temperature) DIRECTLY onto the surface of the graphite heat sink (i.e. like a fuel-injector), at a metered rate (adjust rate according to observed/measured results; an automated controller and sensor package are probably needed) 3. Use a fan to blow climate-controlled air (or inert gas) across the surface of the heat sink in a closed system with the exhaust-pipe (see step 5) 4. Operate the entire system in a climate-controlled box (or room), segregated from the operator (i.e. eliminate environmental variables), and optimize the humidity, temperature, and pressure for fast (but, not TOO fast) vaporization of the coolant (i.e. the heat in the heat sink should CAUSE the vaporization; losing 2260 J/g to water or 841 J/g to ethanol, through vaporization, instead of 4.184 J/g x dT-Celsius for NO PHASE CHANGE water) 5. Exhaust the vapor via a collector pipe (i.e. like a distillery) to the external environment (i.e. NOT the climate-controlled "box"), where it can be collected for disposal or (potential) reuse... after it has been cleared of any contaminants 6. Install the reservoir in an operator accessible environment, connected by hose or pipe to the system, and keep the reservoir "topped off" If my hypotheses are correct, the above could be a great way to maintain the OPTIMAL operating temperature of CPUs/GPUs... instead of dangerous attempts to reach the COLDEST operating temperature. You're not working with superconductors, qbits, or radio telescopes. Colder is not NECESSARILY better. This cooling system, I imagine, would require R&D on EVERY STEP to reach optimal performance. Or, just run a chilled, electrically-non-conductive coolant over the entire system... similar to an "endless swimming pool"... which would eliminate the possibility of condensation on the circuits. Maybe that will work. But, please... stop using "Three Stooges" cooling solutions: "Our cooling solution uses a HEAT GUN!" smh
This is by far the most entertaining TH-cam video I've seen in a looooong time. The ultimate bro project. If i had an unlimited supply of green paper than this would be the type of stuff I'd be doing on the daily. Breaking record after record just for the fun of it. Hell yeah!
WOW! CALCULATED! SAVAGE! lol Dick Nickler s' thought process FTW!! ......... GG my friend, so cool ! This sure is some next lvl innovative thinking. Very much curious as to how this mad scientist theory will actually play out. Soo yeah: what Jaike said 'PLEASE MAKE THIS HAPPEN!!!!' would be a must-watch for me without a doubt!
the blowymatrons actually worsen it. you get even more condensation on the waterblocks and socket. if you just put some paper towels to soak up the condensation and to insulate it a bit, there will be way less condensation compared to fans blowing on it. if you have sub-ambient components, they will pull water out of the air, if you supply the components with more and more water-rich air, it will be able to pull more water out of the air, and have more condensation build up.
I think the idea is that the blowers are supposed to warm the area while the components are not under load in order to prevent/reduce condensation from happening. Of course if they could turn it off temporarily or (ideally) use a variable speed pump to control the flow of coolant so that it doesn't cause condensation... would be neat if you could connect it through fan control to automatically adjust flow rate as temps fluctuate.
Sure, insulation would have been a thousand times better but I wouldn't say worsen it. The increased air flow provides more energy for the water to evaporate instead of just dripping down on the components.
@mr jönte-dps it actually is making it worse. the increased air provides more fresh air with water vapor in it, providing more water to condensate on the colder waterblock. the fresh air is in fact delivering even more water, so in fact making things worse. the condensated water isnt evaporating into the air, bec. its colder than the ambient temperature, and even getting cooled by the waterblock. so either do no fans, or insulate it. but dont worsen it by putting up fans and supply the cold waterblock with more and more water-rich air so that water can condensate even faster on the waterblock
Whenever LTT gonna replace the CPU and GPU and selling them the listing be like: Works like new, no flaws whatsoever, never been overclocked and have been cleaned regularly. :)
6:25 Totally gonna use this from now on. I wish Anthony could teach part-time at my college. In all my classes for four years, I get 5 weeks of hardware lectures pre-recorded, from an Indian guy I can't understand, literally just reading slides from a 5 year old sideshow about the history of computer architecture. I swear if a week of it was replaced with Anthony talking about current architecture with some plug-ins about past designs, I'd learn so much more.
@@dovakiin4388 DOVAHKIIN, DOVAHKIIN, NAAL OK ZIN LOS VAHRIIN, Wah dein vokul mahfaeraak ahst vaal! Ahrk fin norok paal graan fod nust hon zindro zaan, Dovahkiin, fah hin kogaan mu draal! Huzrah nu, kul do od, wah aan bok lingrah vod, Ahrk fin tey, boziik fun, do fin gein! Wo lostfron wah ney dov, ahrk fin reyliik do jul, Voth aan suleyk wah ronit faal krein! Ahrk fin zul, rok drey kod, nau tol morokei frod, Rul lot Taazokaan motaad voth kein! Sahrot Thu'um, med aan tuz, vey zeim hokoron pah, Ol fin Dovakiin komeyt ok rein! Dovahkiin, Dovahkiin, naal ok zin los vahriin, Wah dein vokul mahfaeraak ahst vaal! Ahrk fin norok paal graan fod nust hon zindro zaan, Dovahkiin, fah hin kogaan mu draal! Ahrk fin Kel lost prodah, do ved viing ko fin krah, Tol fod zeymah win kein meyz fuundein! Alduin, feyn do jun, kruziik vokun, staadnav, Voth aan bahlok wah diivon fin lein! Nuz aan sul, fent alok, fod fin vul dovah nok, Fen kos nahlot mahfaeraak ahrk ruz! Paaz Keizaal fen kos stin nol bein Alduin jot, Dovahkiin kos fin saviik do muz! Dovahkiin, Dovahkiin, naal ok zin los vahriin, Wah dein vokul mahfaeraak ahst vaal! Ahrk fin norok paal graan fod nust hon zindro zaan, Dovahkiin, fah hin kogaan mu draa!!! Also, do you have the link to the podcast, mate?
phrases like _"most expensive consumer graphics card ever"_ and _"most powerful consumer graphics card ever"_ weren't such a bold statement 3 short years ago.
Always love your videos As someone who just never over clocks, I just build high end desktops and go with what I get. Your over clocking videos are great to watch . . .
Maybe try running the computers off a 220v single-phase gasoline generator, through a UPC to clean it up. Since UPCs and PC power packs will usually run dual 220v / 120v, a cheap 220v generator is probably all you need. Plus, you'll have to go outside else you'll die of monoxide poisoning. If you're going to make a dedicated overclock room, you really need a clean 220v power or India will troll you for being low-energy
We have 240v in Canada. We do it by connecting two 120v to the house and then coupling them together. Voila! 240v. Every electric installation have it.
@@SuperWasara Single phase. I think we have two phase for the oven and the dryer. 400v is restricted for industrial use. But we do have 400 amp entry in 240v if we need it.
+1man1van What's wrong with violin music? Have you seen Lindsey Stirling play? She's great! There's sections of every kind of music that sucks. Plus it was a joke. Sit back and have a laugh, relax a little bit! It's all in good fun.
I loved how geeky this was and remembered what a time sink trying to find the optimal stable frequency is while overclocking and why I just don't mess around with it much anymore.
This is what I want in someday.
I want my PC to be in a different room with a team of people working 9 to 5 to keep condensation down on a crazy overclock while I game in silence.
j bitch you wanna work for linus dont lie
i had a vision of working in a boiler room on an old steamship, covered in soot, while you game in your stateroom near the helm.
Scotty we need more power!
Im giving her all all she's got captain!
hahaha 'while I game in silence'
really want 2 like this but i wont so it stays at 420 likes :)
CPU overheats? Get a better cooler
CPU *overcools?* Get a heatgun
“Hey guys my CPU is underperforming”
“Why, is it overheated?”
“No, it’s too close to absolute zero”
@@touchofthorn1841 it would then become a super conductor and out perform any OCing
fun fact, ceramics turn into superconductors at around -63c to -66c
It's called coldbug
U don't need heatgun,just use AMD. ;)
Linus is the tech guy that I go when I want to know something, and Anthony is the tech guy that my tech guy goes when he wants to know something 🤔
Accurate AF
Anthony: My favourite tech guys' favourite tech guy... 😁
Anthony tech tips
@@ABZer0x_x Breaking news: Anthony fires Linus, says his tech tips were too weak
wonder who anthony goes to for his tech tips
“It might be the most expensive graphics card ever”.
Well that aged well didn’t it?
Really hope this commentary ages just as well
Like fine milk
i mean technically for a small period it was more expensive than a 3090 ti
@@MultiPHCS not to worry friend, it did :D
@@MultiPHCS it didn’t
Sounds like my gaming laptop when using browser
LOL
i got two 1080ti's in SLI and a 9900k
@@mrcokez1 ?
@@mrcokez1 ok?
@@mrcokez1 weird flex, but ok
Linus attends a funeral
Linus meets some old friends
Linus’s friends mourn
Linus be like “You know what else is sad? The fact that you guys aren’t using SQUARESPACE !”
👍
NGL, he makes the advertising fun to watch XD
"This is a private ceremony"
Linus: "You know what else is private? Private Internet Access! Because you can’t spell ‘private ceremony’ without ‘VPN’”
Would probably go through his head at this point.
“Linus, this is no joke: he’s dead.”
Linus: “yeah, yeah I know he’s dead, JUST like our partnership with Tunnel Bear!!”
Love how Linus fell for the whole "it wont work without RGB" joke
my friend did the same to me making my custom pc.
i only had a rgb strip before and he was like like i cant disable the rgb.
because its built into everything.
then smiles. i was like u asshole.
@@miciso666 Honestly RGB *DOES* improve performance tho!!! Have you tried it?
@@amberlewis012 rgb makes anything run faster. even people. why else would they put lights in the bottom of shoes?
@@xtreemgamer129 it also makes people ask 'whi r u gae?'
Didn't Linus recently show an SSD that wouldn't work *with* RGB?
ı love anthony. Dude that guy feels like a character that was spawned from the the depths of OC Forums. Please can someone tell me how Anthony came to be working for LTT
I think primarily by being awesome
He’s been at LTT for a long time, but he has all this experience with hardware because he used to be a hardware technician for BestBuy. I agree with you though, Anthony is like the big daddy of LTT
@@lespetitesmouettes8996
He was a hardware technician at best buy yet he knows enough to be on Intel, Nvidia and AMD
Rex Galilae his passion shows. They would be lucky to have him
@@lespetitesmouettes8996
I feel lucky to watch him here :D
Bring Anthony on more, he's good people
seconded
Agreed, anthony deserves more screen time.
SimplyGames, it‘s rather a compliment
Anthony is the man.
He is my favorite addition. Really chill, humble, and incredibly knowledgeable. A lot of respect to him
Give Anthony a raise!
Obviously the brains of the operation.
Linus has a talented man right there.
until he breaks the next mac? Wait...that will pull in more views!
You deserve one too good sir. For that amazing avatar and that... name lol.
Dooooo it
to Linus those are fighting words lol
If you are running two 1000W power supplies and your voltage is drooping below 120V you are pulling too much power on a single circuit
Distribute the load across two different circuits
Also make sure your test bench isn't on the same circuit as something using a lot of wattage (ie those giant coolers)
If you are doing something as nuts as this you should have a dedicated circuit to your CPU PSU, a dedicated circuit to your GPU PSU, and a dedicated circuit for the coolers
You also want to be careful of hooking up a 1000W power supply to a really long low gauge extension cord, the longer the cord the higher the amps, it will over heat the cord, and cause voltage droop
Get at least a 12 gauge 3 wire and run it at just the right length
Having your voltage droop was probably what gave you guys so many OC issues, if you tried to push the clock after getting the electrical sorted you might have been able to push the system further
you.. you go up!
don't know how it is in canada, but in germany we have like the average 230V power, which is your 120V i guess, but we also get at least 1 connection of heavy current 3 phase 400V for ovens. building a small transformation panel to get that 3 phase 400V down to your average 120V you could pull crazy wattage from there. Or get a UPS which inputs the 3 phase power and got multiple 120V outputs.
Couldn't they just have travelled into a country where they output 230/240V? That should run a lot more stable, right?
@@richardlange134 I'm sure since they are in a commercial building and require enough power for the servers and computers that they have some sort of three phase box
I just assumed they only had 20A circuits
Any Joe schmoe with 20A circuits could distribute the load
If u use two circuits to power a single PC you will burn something for sure
"if we could lock it to a power state"
IDK maybe that is what the resistor you removed was for
You probably could put a different resistor resistance to lock it
@@lukemagdalin6169 Or a pot meter
Yeah, but they want to lock it to a higher power state than what the resistor allowed. So they would have to put in a different resistor. But I guess at that time the whole rig had become such a franken monster they did not want to disassemble, put the resistor, reassemble, test - only to find out it does not work. I think what Anthony meant was that he could lock it temporarily and test it and if it does not work try different power states and see which one works. Changing resistors for that would not be feasible.
What it does is just fooling the graphics card into thinking it doesn't use any power ... so there is no more power limit anymore.
@@TobiasLeininger no power limit is nooooot good at all i guess LUL. better use some lower resistors (or higher, too tired to think) to make it stable
Anthony is the cool older brother we all wish we had!
Aah yeah! You're right my friend!
In that case I have two Anthony brothers
I have an Anthony but he doesn't like overclocking.... :(
No Just No
@@pugbrz9472lmao
As another sort of iteration of scrapyard wars, you should do OC wars, everyone has the same parts but has to find the best stuff to overclock any way possible! That sounds super interesting, at least to me!
Sounds great but what if the silicon lottery picks the winner? Would be great to watch but with a predetermined winner so most likely won't happen sadly 😕
thats a great idea, maybe they can have 2 or 3 of the same cpus and gpus so slightly negate the silicon lottery
Only buying stuff to cool it from Walmart.
Good idea.
That sounds like something they'd do :D
Haha, when your cooling solution is so over kill you need to use a heat gun. I love it
theres gotta be some kind of lesson to learn here... seriously? THEY ARE RUNNING THEIR CPU SO COLD THEY DECIDED TO USE A HEAT Gun on it! I just thought of a solution.... why not intermittent cooling? or just wait till it starts to heat up.... 3 minutes even?
@@ez_company9325 dry ice and a copper coil could probably replace both of the coolers. Mythbusters can teach you a thing or two
@@Dr.Spatula I like that idea, although i havent seen what ur talking about with the dry ice, however just the copper coil could definitely solve this issue.
@@Dr.Spatula Now I'm curious. What does the copper coil do?
@@Silhalnor More conductivity. The dry ice doesnt melt, it sublimates and its much cooler than ice. Downside is you cant circulate dry ice so you have to physcially add more to it. The real answer is an actual refrigeration system aka air conditioner for your computer using a compressor, condenser and evaporator
3:33 "that is where that noise you guys have been able to hear in the background comes in"
nope thats my hd 7790 at 100% fan speed from opening chrome
loib lol
Firefox all the way *Oh yea* :p
Lmao I have a hd 7700 get on my level
Hey! Show more love for that 7790, mine had 5 years and it was a damn good card, served me well! No offense :D
@@lehelveibel5871 yeah well its a fine card (except on this particular one the fan is broken (only runs from about 1000rpm, doesnt work under 1000) and the driver utility doesnt work correctly, although that last one could be my windows being broken). im pretty sure its almost the same as the xbox one video card
You know it is 100% quality when Linus breaks out the zip-ties.
*tweezers
Did you mean: Tweezers?
T W E E Z E R S
Loving Anthony role these days for Linus. He has been great and would love to hear tech reviews from him as well.
Ali Khan tfw when you predict the future
Stfu
I just realized...
Never buy 2nd hand hardware from a benchmarker. ;)
^^
And Never go in against a Sicilian when death is on the line.
Well a lesson learned the hard way
never play e5 against e4
Lol
"No RGB? But then it won't work"
"Really?"
"No"
lmfaooo
6:25 for those interested
i mean it’s feasible
@@Bellenchia Thanks good sr
the fact he even believed him for a second shows how much he respects him and his knowledge
@@Hunter-nd8px exactly what I was thinking
Wait....OVERCLOCKING ROOM ?
filter the air inside the room to remove all the humidity...
That's actually an incredible idea.
as long as chiller is...well...closed
Then we really need to consider electrostatic charge building up, which in a server room can be a challenge when using air-conditioning
0% humidity is impossible if there is anything with moisture is would have to be more of an over clocking box that the computer goes in and the water chiller goes outside
You need at least 20ish (30-70) humidity for ESD safe operation of electronics. But I guess for a short time would be alright.
I think this is possible but. I mean we cannot be the first to think about this
vacuum or oil tank with sub zero oil could work?
Anthony actually sounds like he knows a fair bit of more the really technical side. Not bagging Linus for once but every team needs someone fluent in that field and also Linux and script writing/editing.
Anthony's been a great addition; he acts as an excellent foil for Linus who can get overcome with enthusiasm. Anthony is the calm voice that knows how it actually CAN be done to make these crazy ideas a reality. A good team, and certainly more bearable than Linus on his own.
the man behind linus
That's why I watch Gamer Nexus...It's like an Anthony channel.
Linus is like Elon musk, great marketer business man who hires people who know more in fields he doesn't; Linus is still a genius and probably knows more about in any - one subject than we do
This is the LTT content i signed up for!!!!! Best video for months!!!
Couldn't agree more.
Matthew skullblood r/wooosh
0:25 - "It might be the most expensive consumer graphics card ever !". *Laugh in RTX 3090*
This video was 2 years ago
Titan Rtx Bro ??
especially now, my local store was selling one for over 10000 euro
@@sokolaad1238 OOF, yeah, he was rubbing his hands, waiting that some fool buy it 10 times over it's original price. like what, the 700 euro rtx 3060 aren't that high...
Ummmm rtx quadro
today on the verge, how to over clock your cpu and gpu properly.
Youll need tweezers
make sure you use the cooler installtion tool
@@chinchy111 and a swiss army knife that hopefully has a philipps head screw driver!
make sure you also dont care about dual channel memory support for the best results!
you'll also need 5 liters of thermal paste
Anthony should do a podcast. He has such a nice voice.
He sounds exactly like the robot in Interstellar!
Is it just me, or does he sound a little bit like GabeN?
He actually did the voice acting for it.
You trying to say he has a face for podcasting?
Amithrius ..perhaps a cup of coffee nobody mentioned his face?😝
Anthony is a cool and underrated character of the Linusverse. He reminds me of Bruce Banner a lot.
Didnt the actor for bruce banner just get fired XD
He reminds me of Shrek. lol...
hey chad how's the exploding fish page goin'?
@ very well! this channel tho... could be better
@@ChadMojito i just suscribed
Everyone - "Drilling a hole in a GPU waterblock is a BAD idea!"
Linus - "You're right. I need safety goggles"
Pretty scary watching Linus dangle his hoodie drawstring over the fans
21:44
Scary for the fan tho ^^
lttstore.com
lttstore.com
lttstore.com
lttstore.com
Not gonna lie. This was fun to watch .
Linus: don't try this at home we're professional idiots.
OverlordVsGaming they have insurance for idiocy.
@@smoketinytom that's usually what makes a professional idiot
@@smoketinytom buhahahahahhahahhah ALMOST TRUE
Technically, he is a professional idiot. Anthony is just a professional.
@@overlordavali1562 lmao
"What a dumb card...We'll trick it!" - Linus 2018
*Anthony Tech Tips*
Leo Voto Anthony Engineer Tips *
These guys looks like two mad scientists firing up an Armageddon weapon xD
They are. Give them a nuke.....and watch Linus drop it
10/10 liked
Pinky and brainiac!
14:02
they should wear lab coats ... with socks and sandals
Linus, dying on the the floor but he is trying to tell you about squarespace.......
That's so Linus
has to get all those sponsors or he can't afford that $15k power supply.
Linus hallucinating sponsors.
LOL
Anthony: Okay pretty stable around the thirti-
Linus: It's clean
Anthony: I haven't even seen it spike to thirty fi-
Linus: *It's clean*
Anthony:
Linus: *I T S S T I L L C L E A N*
06:21 - I'm not hooking up the RGB this time
- what? the card won't work
- *really?*
Benito Llan Matos K?
heh yiff number
Knocked Out your 13 year old boy is showing. K!? He's pointing out it was funny? K?!
David M lmao why did you get triggered over my comment?
I’m 13 and how old are you?
Just pointing out how easy it is to tell you're a little boy by saying things like "k?" and "triggered" Go back to your Jake Paul videos and leave this stuff to the adults.
This TH-cam #RIP_TechTuber battle is soooo fun to watch
It's like watching Doc Brown and Marty trying to reach 8800 Mhz
Yep this episode definitely hit 1.21 gigglewatts
They DEFINITELY have to learn to swear "Great Scott"...
You win the internets.
That's heavy, man.
I was looking for this comment! Good shit! Lmao
*Rtx 3070 comes on the market*
"Im gonna ruin this mans whole career. "
I think the rtx 3070 Will be better in games with Ray tracing on but If you play without Ray tracing the 2080ti Will beat it
@@felixarkang5414 Ye and the 3070 wil beat both of them in both categories.
@@iwannabeme9614 you cant 100% realy on navida you need to wait until 3rd party benchmark comes out
@@felixarkang5414 We dont need them to see the difference in quality. The only thing where the 2080 ti is better is in terms of vram. (just has more) But games dont really use that much soo...
@@iwannabeme9614 how wrong you are LOL
Imagine his electricity bill
I know.. that shit needs a power reserve .lol good one(=
Including the chillers, it's probably only like 2500 watts total. It probably cost less than $1 to run this during the entire production.
Faisal Sohail he’s drawing less than a hair dryer and a toaster running at the same time...
@@benstockton2285 Yeah running for 8 hours That's a lot of money your going to give up at the end of the billing cycle.
Yes but who would use this sort of design for long hours
This feels like some Emergency Room thing.
Two doctors operating live, getting the patient to post and stabilized.
This feels like some Emergency Room thing.
Two people are explaining what happened before they showed up in the ER.
I vote for Anthony's Tech Tips
Hotel Hero 200th like
The guy is awesome. He just comes and tells linus everything he need to do and then goes away lol
@Linus needs to have Anthony on more
Also lets get hotels like to 1k likes so Linus sees this lol
Yessssss
Next video: We KICKED out LUKE!
14:40 "You can see how wet our CPU is"
Dude, I just watched a video where Alex and Ryan put mustard, toothpaste and vaseline on the CPU, then then washed the CPU off in the sink. And you're worried about two drips!? :)
4:07 My first thought was, it is a fan rubbing or something... Its only then, i realized it was Linus.
Underrated
I thought it was some old motorcycle
Would it be better if you mounted the motherboard up-side-down? This way none of the condensation would drip down onto the motherboard.
I've never seen anyone do that.... That should work though tbh...
I was thinking the same. Surprised they didn't build a rig for that and to hold the fans >.
Moisture would still get on the board and even if it 100% worked, I honestly think that it would way too much hassle.
@ It's done in a rig that's can be used for many different setups. They'd have to create a new rig for only that one thing that you typically do once or twice a year at most. The time and effort invested would be astronomically high compared to the incovenience of having to hold fans for a few minutes. Not to mention that while you're working on the custom rig, everything is inverted which in itself would be either weird or simply impractical. And then again, you have the fact that the method would not solve the problem with moisture.
Yeah I think the temps would eventually spread on the mobo and condensation would spread a little bit past the processor from being so cold
"The part we ordered hasn't yet arrived, but we are still doing the video today with something inferior" count: 96.
eciN.
uh so where's the wrong record? i think i missed something
The entire process is wrong in almost every conceivable way. You should NEVER do this under any circumstances to your graphics card, particularly a 1500 dollar one.
@@bastjansejberg105 r/wooosh
Loudest graphics card lmao
@@thandergd You've never heard a RX470 under heavy load did you? X)
Pazus Holy forsaken God damn fuck
:( : tech company's sponsoring LTT
:) : underwear company's sponsoring LTT
😭🔫 Fortnite sponsoring LTT
@@johnmartinez12347 bullshit* sponsoring LTT
@@GamingZeck it's the same
@@Delitor thats what I said ;)
@@GamingZeck haha
This was honestly stressful to watch
Ya, it's their jerry-rigged way of doing things.
All the years I have followed Linus. These last few have been fantastic! You have been so entertaining to watch! Keep it up man!
*literally solders on extra resistor to graphics card*
"I'm a little dissapointed we couldn't adjust more."
Why is Anthony explaining stuff so relaxing to hear?
Anthony can be the Bob Ross of Tech reviews/reporting. :D
Because compared to Linus anybody sounds calm and relaxing.
he knows what he is doing... not like linus... :P
I would let Anthony do this to my GPU. I trust him with my life.
@Ollieplayz I think he is just really honest
@@kenhew4641 Right?? :]
would you trust him with your wife tho?
@@MrDoboz it would be a honour.
Well, I trust him with the life of my electronics. For my life, I would go to a doctor. But I get your meaning. Everyone loves Anthony!
Linus doing a sponsor spot on the floor is my new aesthetic.
"They will cut your finger" - Basically Linus covering a law suit xD
13:44 Made me laugh when the fan ate the paper towel.
*_nom nom nom_*
I'll use my heat gun to get more effective cooling.
-Linus, 2018
he was using it to reduce condensation on the board. if youve seen some do ln2 overclocking they aim a heat gun directly at the vrms of the mother board. maybe not vrms i forget. but they aim it at a portion of the mother board to keep it from condensating. you only want the cpu to be cool you want the rest of the board to stay warm. you just dont aim it at the cpu
They also use a blowtorch to heat the CPU if it gets too cold to boot.
Anthony is awesome have him on more!
Yeah, I just love every video he's in.
He has the patience of a Buddha.
and the looks of him too
Captain Superr Thicc 😂😂😂
Anthony posted this comment
"It might be the most expensive consumer graphics card EVER"
Reality is sometimes disappointing
The more that I watch videos with Anthony, the more I realize that he is one of the most knowledgeable guys there, imagine if he was a part of the team in the early days
"Did you do it?"
"Yes."
"What did it cost?"
"Everything."
"But, Was it worth it?"
"FUCK YEAH!"
Corsair rushes to trademark, "Blowemetron", EK trademarks, "BlowEmatron", Coolermaster begins manufacture on "Belowematronical"
Underrated comment, lol.
Cooler Master MasterBlow Blower Maker Blowematronical*
Cooler Master......the Master Blowers
I'd bet £100 that's been said in a board meeting.
@@rowschankrazer rushes with a snake name in it
Anthony's voice is like music to my ears and somehow my cheap G935's suddenly are sounding like HD800's wtf. He is really gifted man because when he talks I am stone still not moving at all - he really knows how to pass an information - I never had to rewind or repeat anything he said! Great guy :)
"Can we overclock the earth by spinning it faster?" WATCH NEXT WEEKS EPISODE OF LTT
@I Love Japan We'd need to spin the Earth "Around" the sun faster to effect the seasons. Just spiking the Earth would just make night and day shorter
All we need is 5000 blowiematrons around the globe
We might have more condensation, would be useful in areas where rain never shows
😂🤣
you have 299 likes, since I can't give you an X I'll just leave it at that number
Watching this as GN beats their score live on stream
no one can beat tech Jesus
That channel needs more subs. So underated.
He's a bit mumbly but he knows his stuff
@Gareth Fairclough o7 a fellow forgotten weapons fan ! :) Keep spreading the word of Gun Jesus and his prophet John Moses Browning 😂
Wouldn't his prophet be french?
it's like running the Warp 5 engine.
"We're at warp 3.5!"
"Push it! It's called a warp _5_ engine!"
"Yeah, on paper!"
seen linus almost spit in the sink then remember there is no plumbing so just spit on the floor lol
Now the real question is, wtf did the guy in first place do?
deal with the devil probably
Research computer.
He's an nVidia employee with super cherry-picked cards and an insane cooling solution with helium IIRC
Fly it out to Antarctica
He uses liquid nitrogen. JayzTwoCents has a video with him.
Better than your average sci-fi action movie
Very True!
No
I was waiting for the fachugger to jump out.... I was disappointed...
So ... Linus lost against Steve 30 mins after this vid is up. RIP
What about der8auer
Der8auer smashed them all. It just about second place now
Roman just said "Hold my beer" and it was over for them
@@dom3827 typical roman xD
He did only want to pop in and then disappear again, so I guess that's exactly what happened.
@Sompli Not really... De8auer was on LN2... not even close to comparable tbh.
Copper is a better thermal conductor than aluminum. Silver is a (marginally) better thermal conductor than copper. You know which material blows them both away? Graphene. You know what is close to graphene's thermal conductivity, but FAR cheaper? Graphite.
1. Build a graphite heat sink, designed for horizontal installation, with walls to act as a liquid reservoir
2. Nebulize a coolant (i.e. distilled water and/or pure alcohol, kept just below vaporization temperature) DIRECTLY onto the surface of the graphite heat sink (i.e. like a fuel-injector), at a metered rate (adjust rate according to observed/measured results; an automated controller and sensor package are probably needed)
3. Use a fan to blow climate-controlled air (or inert gas) across the surface of the heat sink in a closed system with the exhaust-pipe (see step 5)
4. Operate the entire system in a climate-controlled box (or room), segregated from the operator (i.e. eliminate environmental variables), and optimize the humidity, temperature, and pressure for fast (but, not TOO fast) vaporization of the coolant (i.e. the heat in the heat sink should CAUSE the vaporization; losing 2260 J/g to water or 841 J/g to ethanol, through vaporization, instead of 4.184 J/g x dT-Celsius for NO PHASE CHANGE water)
5. Exhaust the vapor via a collector pipe (i.e. like a distillery) to the external environment (i.e. NOT the climate-controlled "box"), where it can be collected for disposal or (potential) reuse... after it has been cleared of any contaminants
6. Install the reservoir in an operator accessible environment, connected by hose or pipe to the system, and keep the reservoir "topped off"
If my hypotheses are correct, the above could be a great way to maintain the OPTIMAL operating temperature of CPUs/GPUs... instead of dangerous attempts to reach the COLDEST operating temperature. You're not working with superconductors, qbits, or radio telescopes. Colder is not NECESSARILY better.
This cooling system, I imagine, would require R&D on EVERY STEP to reach optimal performance.
Or, just run a chilled, electrically-non-conductive coolant over the entire system... similar to an "endless swimming pool"... which would eliminate the possibility of condensation on the circuits. Maybe that will work.
But, please... stop using "Three Stooges" cooling solutions: "Our cooling solution uses a HEAT GUN!" smh
*linus flips off card when it crashes
*linus loses finger in blowy-matron
@19:50
This is by far the most entertaining TH-cam video I've seen in a looooong time. The ultimate bro project. If i had an unlimited supply of green paper than this would be the type of stuff I'd be doing on the daily. Breaking record after record just for the fun of it. Hell yeah!
noone gives a fuck
@@iaan2k calm down.
Bro project is a stretch, more like nerd project.
@@iaan2k damn you are sad fucking human being
If i could join you, that would be awesome.
What if you turned a realdoll into a computer complete with AI and made it your girlfriend?
Either this or the "Overclocking Room"
It's just crazy and demanding enough for ltt to do
This is an underrated comment, please make this happen!
dry ice will not shatter plastic ( I know we have tons of it here ) , LN2 does tho
even if this doesnt work, i wanna see it
WOW! CALCULATED! SAVAGE! lol Dick Nickler s' thought process FTW!! ......... GG my friend, so cool ! This sure is some next lvl innovative thinking. Very much curious as to how this mad scientist theory will actually play out. Soo yeah: what Jaike said 'PLEASE MAKE THIS HAPPEN!!!!' would be a must-watch for me without a doubt!
The moment when you realise that the thing that bottlenecked the whole system is the power supply and the CPU cooler.
Only at LMG
the blowymatrons actually worsen it. you get even more condensation on the waterblocks and socket.
if you just put some paper towels to soak up the condensation and to insulate it a bit, there will be way less condensation compared to fans blowing on it. if you have sub-ambient components, they will pull water out of the air, if you supply the components with more and more water-rich air, it will be able to pull more water out of the air, and have more condensation build up.
I think the idea is that the blowers are supposed to warm the area while the components are not under load in order to prevent/reduce condensation from happening. Of course if they could turn it off temporarily or (ideally) use a variable speed pump to control the flow of coolant so that it doesn't cause condensation... would be neat if you could connect it through fan control to automatically adjust flow rate as temps fluctuate.
Sure, insulation would have been a thousand times better but I wouldn't say worsen it. The increased air flow provides more energy for the water to evaporate instead of just dripping down on the components.
@romancase with the ambient temps of lets say 20°C you can never warm the area with this chilled cooling liquid which probably is around 0°C.
@mr jönte-dps it actually is making it worse. the increased air provides more fresh air with water vapor in it, providing more water to condensate on the colder waterblock. the fresh air is in fact delivering even more water, so in fact making things worse. the condensated water isnt evaporating into the air, bec. its colder than the ambient temperature, and even getting cooled by the waterblock. so either do no fans, or insulate it. but dont worsen it by putting up fans and supply the cold waterblock with more and more water-rich air so that water can condensate even faster on the waterblock
I doubt they went that far. Imo, they were just trying to dry the condensation as its forming
I wonder how the 1st place cooled it system.
That guy : RUNS BENCHMARK AT GRONLAND
Liquid nitrogen, jay actually showed kingpin's setup in one of his videos
Grönland or greenland
its like watching a star trek crew manage the engines under a fight
If Quark was running the sho.
"MOST EXPENSIVE GRAPHICS CARD EVER" and here we are 3 years later fighting over 10 series cards unless you get lucky
Actually, graphics cards have come way down in terms of price.
13:07 it's like you guys are in a hospital doing surgery to somebody in critical condition trying to save his life hahahaha
LMAO it's so true
More like in 'Surgeon Simulator'...
"This is so dumb"
That's how surgeons operate, guys.
"We just want to keep this piece right here from falling..."
The one thing i learned in this video is that Linus is a spitter and not a swallower
I almost threw up when Linus accidentally sucked in water, as I thought it was antifreeze
Same. Although I’m not sure if I was more worried about Linus or the pc
That chiller doesn't go sub zero, so no need for coolant.
Whenever LTT gonna replace the CPU and GPU and selling them the listing be like:
Works like new, no flaws whatsoever, never been overclocked and have been cleaned regularly. :)
Absolutely awesome and fun to watch
"last i checked, it isn't yesterday anymore" xD
Is it yesterday yet?
Send that clip to your crush without context.
me when playing minecraft.
I like how Anthony is working so hard to prove himself because he's the only LTT employee ever to have broken a $5000 machine.
Jan Ryan Anthony is the hero
Yeah that's true. Linus shows up the last 15mins of the 24 hrs that Anthony puts in.
Isn’t LTT about breaking things anyways?
Bet he isn't.
He is the only one who had his failure documented.
I refuse to believe that Linus hasn't dropped at least $5k of gear in his time doing videos.
6:25 Totally gonna use this from now on. I wish Anthony could teach part-time at my college.
In all my classes for four years, I get 5 weeks of hardware lectures pre-recorded, from an Indian guy I can't understand, literally just reading slides from a 5 year old sideshow about the history of computer architecture.
I swear if a week of it was replaced with Anthony talking about current architecture with some plug-ins about past designs, I'd learn so much more.
Nice bait
Heatgun for the cpu cooler. Allrighty then.
+HimKioo
He knew why. He has just pointing out the irony.
I think the logic was to heat the air around the rig to get rid of the water vapor in the air? lol
@@lorenztor1990 spot on. That's why he wasn't blowing it right on the board.
Joakim Kanon look at overclocking competitions they use blowtorches 😂😂
Joakim Kanon s
Does Anthony have a podcast? His voice is like the smoothest silk to my ears. So calming to listen to him talk.
I think so yeah
@@dovakiin4388
DOVAHKIIN, DOVAHKIIN, NAAL OK ZIN LOS VAHRIIN,
Wah dein vokul mahfaeraak ahst vaal!
Ahrk fin norok paal graan fod nust hon zindro zaan,
Dovahkiin, fah hin kogaan mu draal!
Huzrah nu, kul do od, wah aan bok lingrah vod,
Ahrk fin tey, boziik fun, do fin gein!
Wo lostfron wah ney dov, ahrk fin reyliik do jul,
Voth aan suleyk wah ronit faal krein!
Ahrk fin zul, rok drey kod, nau tol morokei frod,
Rul lot Taazokaan motaad voth kein!
Sahrot Thu'um, med aan tuz, vey zeim hokoron pah,
Ol fin Dovakiin komeyt ok rein!
Dovahkiin, Dovahkiin, naal ok zin los vahriin,
Wah dein vokul mahfaeraak ahst vaal!
Ahrk fin norok paal graan fod nust hon zindro zaan,
Dovahkiin, fah hin kogaan mu draal!
Ahrk fin Kel lost prodah, do ved viing ko fin krah,
Tol fod zeymah win kein meyz fuundein!
Alduin, feyn do jun, kruziik vokun, staadnav,
Voth aan bahlok wah diivon fin lein!
Nuz aan sul, fent alok, fod fin vul dovah nok,
Fen kos nahlot mahfaeraak ahrk ruz!
Paaz Keizaal fen kos stin nol bein Alduin jot,
Dovahkiin kos fin saviik do muz!
Dovahkiin, Dovahkiin, naal ok zin los vahriin,
Wah dein vokul mahfaeraak ahst vaal!
Ahrk fin norok paal graan fod nust hon zindro zaan,
Dovahkiin, fah hin kogaan mu draa!!!
Also, do you have the link to the podcast, mate?
@@岩の下駅 lmaooooo live you man no I don't and I think it's the other person who has one I'm not sure I'll try and look later
This was more intense than when I was at the gym earlier. My heart rate definitely overclocked. :P
lol
stop lying you don't go to the gym.
@@creep4415 Well i do
phrases like _"most expensive consumer graphics card ever"_ and _"most powerful consumer graphics card ever"_ weren't such a bold statement 3 short years ago.
Always love your videos
As someone who just never over clocks, I just build high end desktops and go with what I get. Your over clocking videos are great to watch . . .
well thats no fun
I remember hearing about K|NGP|N around...What, 3DMark 2001? Amazing that he's still tops.
It's actually his job to clock :P
Yeah, but reigning champ for almost two decades, that's crazy impressive that no one has dethroned the King.
Does anyone know who Kingpin is , like does he work somewhere like overclockers ?
@@joedeath332 He is here. It's just insanity
th-cam.com/video/ZYLL5f_NBT8/w-d-xo.html
@@Freeman3007 I saw the video, WTF
Maybe try running the computers off a 220v single-phase gasoline generator, through a UPC to clean it up. Since UPCs and PC power packs will usually run dual 220v / 120v, a cheap 220v generator is probably all you need. Plus, you'll have to go outside else you'll die of monoxide poisoning.
If you're going to make a dedicated overclock room, you really need a clean 220v power or India will troll you for being low-energy
There is 230V in Europe, switching from 120V took 60 years in some places :)
@@SuperWasara 250v in uk (or around 245v realistically)
We have 240v in Canada. We do it by connecting two 120v to the house and then coupling them together. Voila! 240v. Every electric installation have it.
Is it two phase then? Highest voltage we can get to home is 400V three phase 32A
@@SuperWasara Single phase. I think we have two phase for the oven and the dryer. 400v is restricted for industrial use. But we do have 400 amp entry in 240v if we need it.
Imagine being one of the guys who developed the cart and go constantly from "Oh he's doing that" to "Noo ... nooo?!" back and forth xD
When anthony is in the studio, linus is like hes padawan and anthony is yoda xD
It's unbelievable how unprofessionally professional Linus is and that he still gets stuff done.
Im gonna be very sad if I don't find a shirt in the merch that says "Blowie-Metrons" or however the hell you spell it.
Unfortunately that's a women's only design, sorry man. lol
blowie-matrons sound like a christian porn gang
totally need one of those
CrippledMerc says the guy that has a playlist of violin music.... okay mate!
+1man1van What's wrong with violin music? Have you seen Lindsey Stirling play? She's great! There's sections of every kind of music that sucks. Plus it was a joke. Sit back and have a laugh, relax a little bit! It's all in good fun.
I loved how geeky this was and remembered what a time sink trying to find the optimal stable frequency is while overclocking and why I just don't mess around with it much anymore.