I have an older model John Deere backhoe and I'm not sure if it's a8b or what it is I don't know but it's mounted on a John Deere 5303 tractor and I just keep bending cylinders on the extension arm when I reach out and go to dig and curl under it just been some like a tbsp what can I do? Ive even lowered rpms
I would recommend the stage 3 if you're getting the cylinders, but if I'm honest, I always recommend the stage 3. You can run at lower RPMs and get good hydraulic speed. Lots of people are happy with stage 2, but stage 3 is what most people are going with now.
@@travishale1279 No. You just pick the option that you want and everything comes with it that you need for that version. So when you choose state three, it will have the components for stage 1 as well as the stage 3 pump and the lines to connect everything.
I have an older model 3point backhoe on a John Deere 5303 tractor. I keep bending the arm extension cylinder while scooping. It just bens it like a tablespoon. Even with low rpms on the tractor
Great video ‼️
Pretty good operator too👍🏻
My bucket cylinders not the one bending it's the one behind it that runs the arm that lifts the bucket up and down
I have an older model John Deere backhoe and I'm not sure if it's a8b or what it is I don't know but it's mounted on a John Deere 5303 tractor and I just keep bending cylinders on the extension arm when I reach out and go to dig and curl under it just been some like a tbsp what can I do? Ive even lowered rpms
I recommend you copy whatever audio setup (noise canceling mics) that TTWT has. That cylinder looks impressive.
I have a 2021 2025r, what is the first pump upgrade I should do? I would like to run that backhoe cylinder, and the upgraded loader cylinders
I would recommend the stage 3 if you're getting the cylinders, but if I'm honest, I always recommend the stage 3. You can run at lower RPMs and get good hydraulic speed. Lots of people are happy with stage 2, but stage 3 is what most people are going with now.
@@HydrosPlus do you have to buy a stage 2 and stage 3 going from stock to stage 3?
@@travishale1279 No. You just pick the option that you want and everything comes with it that you need for that version. So when you choose state three, it will have the components for stage 1 as well as the stage 3 pump and the lines to connect everything.
I have an older model 3point backhoe on a John Deere 5303 tractor. I keep bending the arm extension cylinder while scooping. It just bens it like a tablespoon. Even with low rpms on the tractor
Will it work on Woods bh75 backhoe curl cylinder. Plan on getting hydro pump for jd 3025. Just purchase loader lift cylinders. Thanks
I'm not sure. Send me an email at kevin@hydrosplus.com or call 501.291.2002 and we can grab some measurements to confirm. Thanks!
Very impressive.👍
Can I find you at GIE... OR the equipment expo?
At the moment, I won't be there, but still looking at my schedule to see if I can sneak up there for a day.
@@HydrosPlus me too!
Ken, Very nice. Do you use the stock hoses and just swap out the cylinder?
Yes. It's a direct fit. Install only takes a few minutes.
👍