those wing tip adapters work great, i ordered the same turbo spray for a home project. the nozzle was damaged so i had to buy adapters, However the hole in the adapter was a bit smaller than the stem on the can, so you may need to open it up just a bit more wit a small drill bit. (just for anyone who had that same issue)
Holy bro! Talk about overkill. Looks like I’ll have to finely put up my cap adapter vid. ASAP. Also spraypaint and paint cans are recyclable. All cities have paint recyclers ✌️
When using rusto and adapters I find it works best when you use a ny fat, lego, Boston fat, and Boston skinny. All other European style caps spray really weird with an adapter.
Great video, been looking all day for a way to use my 3M female cavity wax wands on male top of another brand, that's pretty crafty. Lil hot glue or shoegoo works great for fast set seal if need be, gotta undercoat my trucks wheel wells with cheaper stuff, 3M is expensive and a can doesn't go far but did what I needed, now I'll use less expensive CRC in other places like my doors and wheel wells, kudos!!! Wands would work with paint to...
To this day i use turbo rusto as my go to black fill... killz cans are still the best canned white and rusto high heat enamel in black ( which has a female valve) still is as good as euro cans and lasts way longer... what ya gotta do with the turbo can is super easy.. stock they have that giant fan can.. wit scissor cut it flush to the top and smear super glue or rubber cement on it and cover it wit a small piece of tape.. any kinda tape masking tape works best.. congrats ur half way there... now take a 1/8 drill bit and slowly drill up thru the nozzle hole on the glue sealed fan cap... when. Done u should half a hole from where the cap pops on the turbo can out the top of the stock fan cap.. now take what ever fat cap u use to fill like for throwies i use a level 6 it will almost spray a perfect O but there will be alil loosenes on two sides.. anyway take the fat cap turn it up side down amd with tiny fingernail scissors clip out the webbing ( the four pieces of plastic that make a cross under the fat cap.. two snips will cause each peice to just fly out.. when done ur fat cap will look exactly the same except the underside will have like 1/8th inch of open space... now with rubber cement or super glue both work equally fine put a small dab on the fat cap down spout and around the inner ring that u just snipped out.. push the fat cap onto the stop turbo cap so the glue covered down part goes into the hole u drilled(line up the fan cap line to the fat cap hole so there both forward faces just like a fat cap onto the turbo cap... wrap electrical tape once or twice around the sides so it looks like a fst cap thats just slightly taller... BOOM you now can use ur turbo can amd it will work exactly like a 600mil Montana black can (except black rusto acually covers more and better amd lasts on the wall longer.. use a killz spray can u can get at home depot and u just used home depot bought cans but they worked as good or better then euro ones and if u use the white turbo just use the high heat black ment for BBQS to out line if u wanna do white fill black outline... congrats ur now able to do graff the American way with American paint and the whole time ull ask ur self how u didnt know rusto makes female valve cans still cuz u never used the high heat ones (the kitchen enamel ones are female valve too) there a buck more then the high heat ones but instead of a BBQ on the can there a picture of a oven and fridge... ive never seen any of this info online ever i litterly figured it by buying the cheapest black rusto paint on the rack and laughing when i saw its a female valve.. the non bucket caps work best on the high heat and killz cans like the caps that are shorter with a larger thumb grip on them.. they just fit perfectly the regular outline and fat caps sometimes leak slightly but no more then euro cans do.. hope this helps anyone whose got nothing but a home depot and thinks theyll never have paint that can do what euro cans can do.. you can.. all u need is ny fat caps or level 6 and level 3 caps and ur golden....and watch how people will think ur toy when u pull out rusto then look like a G cuz it sprays like a astro not to mention when people see female valved rusto black cans everyones gets to feel like finally American spray paint has stopped being the joke its been with the male valve system.... stay up and stay gold
Hand, wrist, had gotten tennis elbow a few times😫, arm, shoulders, neck, back, legs, knees, ankles and feet. Im old. Lol. If I'm do like a 5hr burner, I kno an prepare for body to be sore as hell. # lifein40s #oldheads #OTB
I got the GIANT Double XL Can with that crazy 2 vent cap. Those cans run fast and empty quick! If i woulda took the stock vent cap and replaced it with a Fat Cap i know i coulda extended that cans life span but i feel like those cans are good to use for one MONSTER THROW. U got one good outline or just a FATTY hit up or 2 with that vent cap . It take a modification to get the fattest regular can i could use so i would be able to conservative paint...
I spray cars with Rustoleum. Do you think there's a way to make the Turbo caps work on the smaller Rustoleum cans? The fan tip would make those cans easier. Great video.
Yeah you might be able to jam in a 1/8" tube to make up the extra diameter. Won't spray as wide due to the lower pressure. I might just recommend getting some graffiti caps with the pen adapter I made for larger fills
@@S1VE i figured it would probably not spray as well. I appreciate it. I did order a set of nozzles a month ago that was a variety pack. It has 5 different caps but I thought it would be nice to keep the spent ones. Maybe even convert the cans to refillable. Thank you.
When you cut the ball point pen off the little plastic piece.... you realize if you hold the blue piece and push the ink tube up it will just slide out and you don't have to worry about ink getting everywhere
That's the same thing i was about to comment. I only know that technique cause I use the ink from those pen tubes to make homemade krink paint to fill shoe polish bottles with
Snowball cap, Blaster cap, Jumbo cap, tester cap, ¿Are any of those spray caps still around? We use to have those back in the 90's, the caps aren't even the same as the one's we had back in the day. Just wondering.
so i recently did this and it worked however, since in all the stems of the caps there was a slight cut that was made on purpose, some of the paint was constantly spilling. would you know how to fix this?
Any idea, or help....what adapter can fit or make a normal male spray cap to fit a female polyacrylic can?... works for my other cans. ▪︎The female aerosol insert is to long for my short cap stem to depress the can.
good tutorial, but it HAS to be said, youre STILL at the Toy level and youve had this channel for like a decade or more, and its very VERY strange that youre STILL at this level of graff, even if you only did a few black book sketches a year and a few walls or practice walls a year then youd still be far past this current Toy level of graff youre at, im honestly very shocked you HAVENT really progressed that much, its one thing if you were intermediate least then theres not too much reason to be hounded or pushed to progress cause youd be at a respectable level, but unfortunately youre not even at intermediate yet, you have a lot of thicc pieces going to ultra skinny for no reason, lots of random blocky toy asthetic arrows, for no reason, and it looks like you JUST started getting into straight bar style which is something most Toys get to within their 1st or 2nd year of graff, yet youre still in after more than a decade, based on the style and habits you have you seem like youre right at that intermediate level of a Toy, btw im not saying "Toy" as an insult, but as its intended which is your current level of graffiti style unfortunately. you seem to have a good idea on the understanding of paint and can pressure and technical stuff, but youre actual letters and esp Tags are definately NOT up to the bare minimum standard of a writer or even casual writer of over 10-15 YEARS, you SHOULD be much better than this, and take inspo from your favorite writers and sit in your bed or desk and just practice letter forms and tags an hour or 2 every other night or even if its just on the weekends, because ive been casually following your channel since you started it like almost 15 yrs ago and its weird how ive progressed and taken very long breaks and yet i can hold my own as far as style and letters, but you havent progressed that much from the toy kid you were 10 or 15 years ago and its just very very weird to me, so my .02 cents? use this quarantine time to study and practice your letters and tags and evaluate your strengths and weaknesses of your letters and tags and 3d's and make a goal to get to a respectable tier of graff for the amount of years youve been doing it, whether its consistent or casual you KNOW you should be better than this. i hope you find a few grains of truth and smol grain of advice and hope to see your letters and tags improve to a respectable level, NOW GO GET IT BOII!!
Sive!!! PLEASE! PROMISE ME!! promise to go into your blackbook, or fuck it get a shitty dollarstore sketchbook and JUST practice your handstyles and Straight letter bars!!! YOU REALLY need to get your handstyles up to a decent mediocre standard instead of toy standard, THIS IS UNACCEPTABLE FOR THE YRS YOUVE BEEN IN THIS!! And you KNOW this is true!!! #K.I.S.S
![Rustoleum Turbo Can Mods [Male 2 Male Caps]](/img/n.gif)
DIY is at the heart of graff, homie. Thanks for the tutorial bro
Yo man you should definitely get back into speed art. Loved all the older ones
Very useful tutorial but I'm just impressed that somebody on TH-cam FINALLY pronounced the fraction of '32' correctly
Homie got a degree in spray paint
I was literally thinking about this today, nice vid man
I really enjoyed the editing on this and the 360 footy
Nicely done.... Somebody get this guy a 3D printer.
Niiiice! Here in brazil we do the same... just stuck the principal exit of the cap..put a hole in the top and just go fpr it... ny fats works nice!!!
those wing tip adapters work great, i ordered the same turbo spray for a home project. the nozzle was damaged so i had to buy adapters, However the hole in the adapter was a bit smaller than the stem on the can, so you may need to open it up just a bit more wit a small drill bit. (just for anyone who had that same issue)
Holy bro! Talk about overkill. Looks like I’ll have to finely put up my cap adapter vid. ASAP. Also spraypaint and paint cans are recyclable. All cities have paint recyclers ✌️
When using rusto and adapters I find it works best when you use a ny fat, lego, Boston fat, and Boston skinny. All other European style caps spray really weird with an adapter.
It’s because euro caps are bigger, so there’s more movement just realised idk how to explain this but I’m pretty sure it’s because the cap is bigger
Great stuff my man. The edit was on point as well 💥
You can use the utal wide caps for the turbo I do that
Art primo sells a cap that mounts straight onto the turbos!
thanks for the hit offs in my sticker pack man appreciate it alot👍🏼
Any time!
Great video, been looking all day for a way to use my 3M female cavity wax wands on male top of another brand, that's pretty crafty. Lil hot glue or shoegoo works great for fast set seal if need be, gotta undercoat my trucks wheel wells with cheaper stuff, 3M is expensive and a can doesn't go far but did what I needed, now I'll use less expensive CRC in other places like my doors and wheel wells, kudos!!! Wands would work with paint to...
To this day i use turbo rusto as my go to black fill... killz cans are still the best canned white and rusto high heat enamel in black ( which has a female valve) still is as good as euro cans and lasts way longer... what ya gotta do with the turbo can is super easy.. stock they have that giant fan can.. wit scissor cut it flush to the top and smear super glue or rubber cement on it and cover it wit a small piece of tape.. any kinda tape masking tape works best.. congrats ur half way there... now take a 1/8 drill bit and slowly drill up thru the nozzle hole on the glue sealed fan cap... when. Done u should half a hole from where the cap pops on the turbo can out the top of the stock fan cap.. now take what ever fat cap u use to fill like for throwies i use a level 6 it will almost spray a perfect O but there will be alil loosenes on two sides.. anyway take the fat cap turn it up side down amd with tiny fingernail scissors clip out the webbing ( the four pieces of plastic that make a cross under the fat cap.. two snips will cause each peice to just fly out.. when done ur fat cap will look exactly the same except the underside will have like 1/8th inch of open space... now with rubber cement or super glue both work equally fine put a small dab on the fat cap down spout and around the inner ring that u just snipped out.. push the fat cap onto the stop turbo cap so the glue covered down part goes into the hole u drilled(line up the fan cap line to the fat cap hole so there both forward faces just like a fat cap onto the turbo cap... wrap electrical tape once or twice around the sides so it looks like a fst cap thats just slightly taller... BOOM you now can use ur turbo can amd it will work exactly like a 600mil Montana black can (except black rusto acually covers more and better amd lasts on the wall longer.. use a killz spray can u can get at home depot and u just used home depot bought cans but they worked as good or better then euro ones and if u use the white turbo just use the high heat black ment for BBQS to out line if u wanna do white fill black outline... congrats ur now able to do graff the American way with American paint and the whole time ull ask ur self how u didnt know rusto makes female valve cans still cuz u never used the high heat ones (the kitchen enamel ones are female valve too) there a buck more then the high heat ones but instead of a BBQ on the can there a picture of a oven and fridge... ive never seen any of this info online ever i litterly figured it by buying the cheapest black rusto paint on the rack and laughing when i saw its a female valve.. the non bucket caps work best on the high heat and killz cans like the caps that are shorter with a larger thumb grip on them.. they just fit perfectly the regular outline and fat caps sometimes leak slightly but no more then euro cans do.. hope this helps anyone whose got nothing but a home depot and thinks theyll never have paint that can do what euro cans can do.. you can.. all u need is ny fat caps or level 6 and level 3 caps and ur golden....and watch how people will think ur toy when u pull out rusto then look like a G cuz it sprays like a astro not to mention when people see female valved rusto black cans everyones gets to feel like finally American spray paint has stopped being the joke its been with the male valve system.... stay up and stay gold
Cool Caps 😎🖐
My fingers always get a decent workout painting a wall 😅
Hand, wrist, had gotten tennis elbow a few times😫, arm, shoulders, neck, back, legs, knees, ankles and feet. Im old. Lol. If I'm do like a 5hr burner, I kno an prepare for body to be sore as hell.
# lifein40s #oldheads #OTB
You're a toy
I got the GIANT Double XL Can with that crazy 2 vent cap. Those cans run fast and empty quick! If i woulda took the stock vent cap and replaced it with a Fat Cap i know i coulda extended that cans life span but i feel like those cans are good to use for one MONSTER THROW. U got one good outline or just a FATTY hit up or 2 with that vent cap . It take a modification to get the fattest regular can i could use so i would be able to conservative paint...
yo i just made this yesterday! what a coincidence lol
Can we say that the smaller the size of the orifice we make in the adapter, the thinner the line? Thanks maestro
works like a charm bro thank you
Any time!!
This gonna help a ton! Thanks man fire vids🔥🔥🔥 rip youfo btw
Anyone else use the caprisun straw as an adapter??
😂😂 yessir!
i use the tips of paper mate eagle pens i just cut a little bit of it so the caps can fit
@@viktorvaugndoom never tried that one bro does it bend if you apply to much presssa
@@bigkadoeee3089 nope it works fine
I spray cars with Rustoleum. Do you think there's a way to make the Turbo caps work on the smaller Rustoleum cans? The fan tip would make those cans easier. Great video.
Yeah you might be able to jam in a 1/8" tube to make up the extra diameter. Won't spray as wide due to the lower pressure. I might just recommend getting some graffiti caps with the pen adapter I made for larger fills
@@S1VE i figured it would probably not spray as well. I appreciate it. I did order a set of nozzles a month ago that was a variety pack. It has 5 different caps but I thought it would be nice to keep the spent ones. Maybe even convert the cans to refillable. Thank you.
For turbo can just take the 1/8th bit the the male valve stem. Then male caps fit right in!
I'm sorry what??
You saved me alot of money man
You can 3d print custom adapters all day for pennies.
Will the rustoleum turbo spray tip work on a regular rustoleum can if I cut the pen parts like you did here in your video.I guess Ill try it.
No the stem of the turbo is larger than the standard rusto
12:10 damn i dont remember taking acid before this video
Good work
Can you hydro dip white shoes? And how much was the paint?
Yes to the shoes and which can were you asking about
When you cut the ball point pen off the little plastic piece.... you realize if you hold the blue piece and push the ink tube up it will just slide out and you don't have to worry about ink getting everywhere
awesome tip my man!
That's the same thing i was about to comment. I only know that technique cause I use the ink from those pen tubes to make homemade krink paint to fill shoe polish bottles with
Good solution 👍
What about making something close to a astro fat cap?
Clutch af
great content
Damn thats a tight idea thanks
Great ol Skool knowledge!! How long you been at it?!
ten years or so
We have Knauf paint here in Peru will use this hack.
Can't say I have ever seen Knauf, I will haveto try and get my hands on it
Snowball cap, Blaster cap, Jumbo cap, tester cap, ¿Are any of those spray caps still around? We use to have those back in the 90's, the caps aren't even the same as the one's we had back in the day. Just wondering.
No not quite, a company has started remaking jiffy and Wally caps from the 90’s but for the most part they are all remastered
FUCKING BRILLIANT. Bless your heart.
Yooo SIVE! How can I get a random submission sticker pack? Lmk!
so i recently did this and it worked however, since in all the stems of the caps there was a slight cut that was made on purpose, some of the paint was constantly spilling. would you know how to fix this?
Hmm maybe need a slightly longer adapter to make sure it’s covered
Can i take the turbo cap and adapt into any spray can?
No, the valve stem is really wide. I think it works on some types of kilz but not sure what else
Adapters are fine if you have a fat cap back in the days Birth of Graffiti we used oven cleaner caps.
Any idea, or help....what adapter can fit or make a normal male spray cap to fit a female polyacrylic can?... works for my other cans. ▪︎The female aerosol insert is to long for my short cap stem to depress the can.
That’s a tough one for sure. Might need to do a long male adapter to a female back to the normal male
adapter caps can go on male cans ?
yeah that's their original design, I'm just showing how to make some at home
didnt work the pen cap doesnt fiton bic and I trimd it further and it still wouldnt fit.
Why do they even have the tubes on top?
Cause they're trying to deter ppl from using fat caps with their shitty paint. Liquid shit's coverage is better, you can buy some at Harvey's... I do.
How to make flat cap?
Save the pen bodies they're great for snorting things
Quero fazer compras de spray como faço .brasil
who has the back of the pen and not the tip???
Why use this crapy paint in the first place? Is it extra cheap??? Sorry i dont get it.
They’re like $1
lol or just use stock cap n not do trash at everything
I feel if I make it it will explode on me
25$ 🤣 all my piece's free 99!!
P
Don't PIN me I'm inflatable!
good tutorial, but it HAS to be said, youre STILL at the Toy level and youve had this channel for like a decade or more, and its very VERY strange that youre STILL at this level of graff, even if you only did a few black book sketches a year and a few walls or practice walls a year then youd still be far past this current Toy level of graff youre at, im honestly very shocked you HAVENT really progressed that much, its one thing if you were intermediate least then theres not too much reason to be hounded or pushed to progress cause youd be at a respectable level, but unfortunately youre not even at intermediate yet, you have a lot of thicc pieces going to ultra skinny for no reason, lots of random blocky toy asthetic arrows, for no reason, and it looks like you JUST started getting into straight bar style which is something most Toys get to within their 1st or 2nd year of graff, yet youre still in after more than a decade, based on the style and habits you have you seem like youre right at that intermediate level of a Toy, btw im not saying "Toy" as an insult, but as its intended which is your current level of graffiti style unfortunately. you seem to have a good idea on the understanding of paint and can pressure and technical stuff, but youre actual letters and esp Tags are definately NOT up to the bare minimum standard of a writer or even casual writer of over 10-15 YEARS, you SHOULD be much better than this, and take inspo from your favorite writers and sit in your bed or desk and just practice letter forms and tags an hour or 2 every other night or even if its just on the weekends, because ive been casually following your channel since you started it like almost 15 yrs ago and its weird how ive progressed and taken very long breaks and yet i can hold my own as far as style and letters, but you havent progressed that much from the toy kid you were 10 or 15 years ago and its just very very weird to me, so my .02 cents? use this quarantine time to study and practice your letters and tags and evaluate your strengths and weaknesses of your letters and tags and 3d's and make a goal to get to a respectable tier of graff for the amount of years youve been doing it, whether its consistent or casual you KNOW you should be better than this. i hope you find a few grains of truth and smol grain of advice and hope to see your letters and tags improve to a respectable level, NOW GO GET IT BOII!!
Lmao
My 2 cents.....learn when to use a full stop.
What a huge waste on money and talent.
Sive!!! PLEASE! PROMISE ME!! promise to go into your blackbook, or fuck it get a shitty dollarstore sketchbook and JUST practice your handstyles and Straight letter bars!!! YOU REALLY need to get your handstyles up to a decent mediocre standard instead of toy standard, THIS IS UNACCEPTABLE FOR THE YRS YOUVE BEEN IN THIS!! And you KNOW this is true!!! #K.I.S.S
Toy