Superb speed passes, bro ! You are really pushing to the limit of this rc car with a 3s setup ... and thanks for sharing this video so that I can feel the speed of a real +100 mph pass,.. that sound is amazing ! 🚀
Awesome work, I went for it yesterday on 3s however my speedrun body setup didn't go to plan (think like a kite!) so it's back to the stock body although high wind was a factor it needs some work to keep the front end down on mine!
Thanks brother 👊 haha yeah they literally fly away when you go fast enough 😂 I had to reduce the size of my front splitter a little as my last test it was causing too much downforce at the front. I had to increase the rear wing angle to help balance it out but now I think it's in the sweet spot for Aero 👌 just need to keep pushing it, good luck Rich I hope you do well on your next run 👍
@@TheRCMaster Thanks I took a couple of vicious front flips yesterday (Video up later today 5.30 PST) - aero body trial was a disaster but the car was tough as nails! I've just fitted stiffer rear springs as I think it was squatting too much under full throttle. How have you set up the front spring/oil wise? I think I may try a front wing just off to see how it goes with the new springs on. Stay safe.
Thanks man 👊 it's a shame it wasn't my brother filming my girlfriend forgot to put on the windsock 😏 now the video is windy as hell but at least it's a legit pass! Thanks for watching I can't wait to get back out and run it again 😁
Mostly for speed runs just stock matrix 1/10 touring car foams. 26 mm front 30mm width rear,around 38 shore hardness. Contact, Xceed and Ulti are other brands I like to use.
Wow great build. I am currently working on my own 124019 build. I have it sorted out for the most part, but having a problem with the rear axle binding. It is smooth as silk until I put on the rear wheels and tighten the wheel nuts. If I back it off at all the wheels fly off. I'm using nylon lock nuts and loctite. Do you have any suggestions?
Lately I have been setting my wheels then adding a drop of super thin super glue to the tip of the threads. It gets in and holds the nut quite well and cracks away clean unlike locktight that always leaves crap on the threads
Would you use a different motor like a Tamiya transpired 3.5t it says it has 698watt almost 1h.p. and what motor and esc is the car without green rims full motor details please
I guess I'm gonna need some real tall gearing, and probably a bit higher kv to achieve that. A few more days, and this freak arctic storm we've been going through the past will be history, and I'll be free to start testing. I'm interested in your gear ratio, I think I might be able to run more than 1 to 1.
@@davidnadeau9460 part of that is true, but I've already proven what I stated. Taller gearing on 3s compared to mine is what I meant, also at the time I was running 3800 kv with something like 20 spur, 32 pinion.
I actually ran my brushless sg1604 for the first time that day too and crashed it before the camera was even on 😂 I'm thinking it's going to be a 75mph challenge tops 🤓🤔 they need alot of work to go fast
Hi, I like to know how did you get the cover to rise? My ESC is a little too tall and when I put the cover on is lopsided on one side. Looks like the two plastic pin (where you mount the cover) is not stock. Would you please tell me where to get them? Many thanks in advance.
It's really hard to say now bro until I get to have a play with the 104001 there will be a few positives and negatives of that Central spur design but hey battery side trays take care of the space issue. I think the drivline strength is going to be next level 🤞 fingers crossed can't wait to see inside the diffs. Make sure to jump on the 104001 owners Facebook group for the latest updates 😁
@@TheRCMaster no facebook, but between you and a select other few I stay in the speedrunning loop. Kinda excited mostly for the 104001 because of the endless body choices that will be available now. So many ways to show your speed and style, people will finally have different looking builds. Gonna be a good season 🏎️💨
Hey mate I’m building my first speed run car 1/10 carbon chassis tt01, can you please explain what specs I would need regarding esc and motor (Kv) and also what setup are you running in this car? Thanks so much in advance
What motor is that, I’m not asking the kv because I know you probably don’t want to share. But could you tell me what motor that is like the can size and witch model it is from TP
Superb speed passes, bro ! You are really pushing to the limit of this rc car with a 3s setup ... and thanks for sharing this video so that I can feel the speed of a real +100 mph pass,.. that sound is amazing ! 🚀
Cheers I'm glad you really enjoyed watching it bro! Thanks for the encouragement 💯
Holly shit that's fast. Congratulations Dan.☆☆☆☆☆, RC MASTER. Hollywood is your next stop they'll be making a movie about you next.🙂🦘🇦🇺👍. Dags.
Such a clean build
Thanks brother 👊
Reminds me of drag racing chasing them numbers ,
Awesome job 👍🏻👊🏻
Cheers mate, thanks for watching 👍
So Sweet Bro. 109 new PB Just Loving it.. Big Thumbs up Brother.
Cheers, thanks for watching 👍
Big smile from me.. 😀 because it was really a very good video to watch too The RC Master.. 😃👍
Thanks alot mate 😎
Well done on 3s brother! I’m waiting for the weather to improve so I can try to beat my 109 mph PB. 🤞🏻
Thanks man so happy to get a new PB and finally get back out 😎 it's going to be close competition now for top spot 👌
@@TheRCMaster For sure! Nice to see you back!
Amazing mate, what a Brutality 👊👊👊😎
Was missing you in action man ❤.
Thanks brother 👊 it's feels good to be back 😎
Awesome run dude. Should get mine out next week with a new motor & Lipo. Hopefully get closer to the magic 100mph.
Cheers mate 👍 much appreciated 😊 I'll be keeping an eye out for your next run! Thanks for watching
Congratulations great job I hope you continue to get more videos thanks for the tips you have given me
You're welcome thanks for watching mate 👍
Fantastic runs!! Love watching your vids.
It's the extra Magnesium in the road that you're testing on. ;)
bro you have found the magic recipe for speed well done
Wow that little thing is moving.
Wow,awesome speed run and build brother. Keep the awesome videos coming.
Thanks mate can't wait to get some more passes in with this combo 👊
@@TheRCMaster 👍👊😃
Nice Pass ~ Congrats
Awesome job brother. keep up the great work 🏎💨💯
Thanks brother 👊 it's been a little while glad to finally get out again!
That my friend was sweet!!!!! good job
Thanks man! I'm glad you enjoyed it 👍
@@TheRCMaster I just ran mine at 75.3 mph so I have a few more to catch up...LOL
That's amazing mate, very impressed!!!!
Thanks brother 👊
Xtream car! You did good upgrade 😉
Thanks brother 👊
Awesome stuff mate, congratulations on the new 3s record!
Thanks brother 👊
Love it,your getting faster and faster 👊🏻👊🏻👊🏻👍🏻
Thanks brother 👊
Wow that's the best! Congratulations!
Thanks bro 💪
My friend in Malaysia do 174km/h with single 2s lipo stock gearing.
That's crazy you guys are both tied at 109
Great passes 👍🏁
Awesome work, I went for it yesterday on 3s however my speedrun body setup didn't go to plan (think like a kite!) so it's back to the stock body although high wind was a factor it needs some work to keep the front end down on mine!
Thanks brother 👊 haha yeah they literally fly away when you go fast enough 😂 I had to reduce the size of my front splitter a little as my last test it was causing too much downforce at the front. I had to increase the rear wing angle to help balance it out but now I think it's in the sweet spot for Aero 👌 just need to keep pushing it, good luck Rich I hope you do well on your next run 👍
@@TheRCMaster Thanks I took a couple of vicious front flips yesterday (Video up later today 5.30 PST) - aero body trial was a disaster but the car was tough as nails! I've just fitted stiffer rear springs as I think it was squatting too much under full throttle. How have you set up the front spring/oil wise? I think I may try a front wing just off to see how it goes with the new springs on. Stay safe.
Gorilla tape your sides to the chassis during speed run.
Nice 👍 congrats bro
Thanks for watching 😊
Awesome 🔥👍✌️
Great job brother..
Cheers thanks for watching Boss 👊 😎
Nice run bro congrats...
Great run!!! 👍🍻
Thanks mate 👍
Awesome run man... Keep it up
Thanks brother 👊
Good work man
Thanks bro 👍
That’s crazy!!!! Please show us that custom front splitter 👌
I will cover it in more detail in my next video
@@TheRCMaster oh nice one dude 🤩
Smooth job, looks sic
Cheers bro 😎
Wicked 🚀
@The RC Master nice pass, can you link all the parts in here, esc / motor / gearing / pinion how many tooth, awesome speed.
Yeaaaaa Boiiiiii
I was motivated to get out after seeing your 108 mph run definitely have me some inspiration 😎 can't wait to see your 4s beast
Thanks Broski !!!!
I actually remembered to give you a shoutout today while filming the run 👊
Gg guy👏
Omg that fast run sir,u already use stock gear sir?? What servo u use sto stble & clean run....
Now that setup is legit. TP power motor, foams, tall gearing...excellent performance
Thanks man 👊 it's a shame it wasn't my brother filming my girlfriend forgot to put on the windsock 😏 now the video is windy as hell but at least it's a legit pass! Thanks for watching I can't wait to get back out and run it again 😁
Awesome job
Thanks bro 👊
just sic 💯
Great video ! What size wheels and tires are you using ? Thank you !
Mostly for speed runs just stock matrix 1/10 touring car foams. 26 mm front 30mm width rear,around 38 shore hardness. Contact, Xceed and Ulti are other brands I like to use.
What brand amplifier is that? Mine just black box. No heatsink..
Wow great build. I am currently working on my own 124019 build. I have it sorted out for the most part, but having a problem with the rear axle binding. It is smooth as silk until I put on the rear wheels and tighten the wheel nuts. If I back it off at all the wheels fly off. I'm using nylon lock nuts and loctite. Do you have any suggestions?
I managed to sort this out as well. I put front drive axles on front and rear. Speed run coming as soon as my GPS arrives. Will post on TH-cam
Lately I have been setting my wheels then adding a drop of super thin super glue to the tip of the threads. It gets in and holds the nut quite well and cracks away clean unlike locktight that always leaves crap on the threads
Thanks mate, I will utilize this tip with the super glue. I appreciate your response best of luck.
Hey another great run… good job.
I just picked one up. I plan on starting my build soon. How’d you make that front bumper . Looks good .
What the name of this app on your mobilephone The RC Master..?
It's the Sky RC gps app
Would you use a different motor like a Tamiya transpired 3.5t it says it has 698watt almost 1h.p. and what motor and esc is the car without green rims full motor details please
I guess I'm gonna need some real tall gearing, and probably a bit higher kv to achieve that. A few more days, and this freak arctic storm we've been going through the past will be history, and I'll be free to start testing. I'm interested in your gear ratio, I think I might be able to run more than 1 to 1.
No just need the right kv motor even snaller pinion are sometimes benefit
@@davidnadeau9460 part of that is true, but I've already proven what I stated. Taller gearing on 3s compared to mine is what I meant, also at the time I was running 3800 kv with something like 20 spur, 32 pinion.
I think you should Get on Rc Clans 100mph challenge using a SG1603/1604
I actually ran my brushless sg1604 for the first time that day too and crashed it before the camera was even on 😂 I'm thinking it's going to be a 75mph challenge tops 🤓🤔 they need alot of work to go fast
@@TheRCMaster definitely as they're so twitchy 🙈👍🏻👊🏻
Hi, I like to know how did you get the cover to rise? My ESC is a little too tall and when I put the cover on is lopsided on one side. Looks like the two plastic pin (where you mount the cover) is not stock. Would you please tell me where to get them? Many thanks in advance.
What brusheless you use bro?
Castle Mamba monster 2 and TP motor
Can you us how to build the remote and always link the parts for it
Hello..I have the same car.. where can I get upgrade to my motor and esc..Thanks
Do you prefer the layout of the 124 and 144 for speedruns? Or do you thing the 104001 with the center diff will become king?
It's really hard to say now bro until I get to have a play with the 104001 there will be a few positives and negatives of that Central spur design but hey battery side trays take care of the space issue. I think the drivline strength is going to be next level 🤞 fingers crossed can't wait to see inside the diffs. Make sure to jump on the 104001 owners Facebook group for the latest updates 😁
@@TheRCMaster no facebook, but between you and a select other few I stay in the speedrunning loop. Kinda excited mostly for the 104001 because of the endless body choices that will be available now. So many ways to show your speed and style, people will finally have different looking builds. Gonna be a good season 🏎️💨
124019 RC카175km/h 대박 입니다12만원짜리로
💪🔥
What motor mount you use?
what did you change on the car ? to run it that fast ?
Hey mate I’m building my first speed run car 1/10 carbon chassis tt01, can you please explain what specs I would need regarding esc and motor (Kv) and also what setup are you running in this car? Thanks so much in advance
What scale is this and how much power you think it can hold i only have 4s and higher battery
Where to get the front bumper?
What motor is that, I’m not asking the kv because I know you probably don’t want to share. But could you tell me what motor that is like the can size and witch model it is from TP
Hey mate it's a TP 3620 size with a 3.175 mm shaft 👊
@@TheRCMaster oh wow ok cool thanks 😊
What battery did u use on 3s single 🤔
@@TheRCMaster all I want to know what battery to use bro
Whats the link for the tp motor?
Where did you get the tires from?
Nice what’s the setup?
I will go into great detail in later videos when I have fully tested and know what it's capable of so make sure to subscribe and follow the channel 👍
Where did you buy the wheels?
They are matrix 1/10 foams 37 shore I got them from a local store, but they also have a website speedyrc.com
Whats this eletronic use?
Can you please give me the link to the parts you used
What’s the spec on this build?
What motor is that and Esc
TP motor and Castle MM2 esc
Hello, which tp motor is that?
It's a 3620 size with a 3.175 mm pinion and I'm keeping the kV rating to myself until I have finished testing to it's full potential 🤞
@@TheRCMaster 👍
Pretty fast "toy" 😃
Hell yeah 💪 thanks for watching 😎
what spec this rc..fasttttt
What tp motor js that
My friend of me got 170kmh by using 2S battery & sensored motor sir...
All you need is more amp and high kv motor then an esc that handle those amps. Running 3s simply offload the amps requirements by one third
Can u give me the spec bro. Btw so fast
What size tp I've been trying to find that size
It's a 3620 with a 3.175mm shaft
Cool thanks is it a 540 or 550
What kv
What gps was it?
Sky rc GSM 020
Great video...im trying out somethings ,which way to go lol drag or speed...I have some videos up
I’m just curious, which part of this is still WLToys?
In my next video I will explain the electronics used and show more details of the build 👍 thanks for watching
Why haven’t you put out anything new
So I keep seeing all these people using their phones to measure speed. How is this possible? Is there something that goes into the car to track it?
Yes mate I use a sky RC gsm020 it's the box mounted between the servo and the motor. It runs off an app via Bluetooth
@@TheRCMaster thank you. I’m gonna have to check them out
First