Window & Window Regulator Removal | Honda S2000

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 ก.ย. 2024
  • Hey everyone! Today I'm going to show you how to remove the window & window regulator on a Honda S2000. I'm doing this as part of a small series on window regulator repairs.
    Door Panel Removal Video: • Door Panel Removal | H...
    Window Regulator Repair Video: TBA
    Window & Window Regulator Install Video: • Window & Window Regula...
    Door Panel Install Video: TBA
    Follow me on Instagram for more Honda S2000 content: / diyguystv
    Please consider using the links below to purchase tools in order to support my work.
    Tools/Parts necessary:
    - Phillips Head Screwdriver
    - Flat Head Screwdriver
    - Interior Trim Removal Kit: amzn.to/3HZmJHQ
    - 3/8" drive 12mm socket: amzn.to/3JiyxUH
    - 3/8" drive extension
    - 3/8" drive torque wrench: amzn.to/48iv0l9
    - 4mm Allen Key
    - 1/4" drive torque wrench: amzn.to/3OKcQ4K
    - 1/4" drive 10mm socket: amzn.to/3UFqD01 (for use with 1/4 drive torque wrench)
    - 12mm wrench: amzn.to/3OHJTq8

ความคิดเห็น • 11

  • @Giordansdetailing
    @Giordansdetailing 6 หลายเดือนก่อน

    Perfect thanks for this!

  • @lalomontes414
    @lalomontes414 2 หลายเดือนก่อน +1

    What if your window doesn’t roll down ? Mine clicks but doesn’t roll down. Passenger side

  • @483SGT
    @483SGT 6 หลายเดือนก่อน

    Thanks!

  • @russelloppenheimer3970
    @russelloppenheimer3970 6 หลายเดือนก่อน

    Awesome as usual.
    Suggestions. Next time show close up of plastic clips you have to squeeze using pliers from back side, in case people don't know what these are, what they have to squeeze.
    Also, ideally you want to use JIS screwdriver, not philips. If any are stubborn, philips much more likely to strip head, JIS thats almost impossible.

    • @DIYGuysvideo
      @DIYGuysvideo  6 หลายเดือนก่อน

      Good suggestions, could have definitely squeezed my iPhone back there. Good point on the JIS too, I’ll add it to the parts list. These ones haven’t been stubborn in my experience but those rotor screws are hell.

    • @S.Tua.Thousand
      @S.Tua.Thousand 5 หลายเดือนก่อน

      Jesus Christ this clip is defeating me

  • @jrlude_
    @jrlude_ 6 หลายเดือนก่อน

    Man mine did this, driver aide at 120k miles WHILE IT WAS RAININ! I bought the much cheaper ebay cable kit (comes with an orange colored plastic reel). PITA to tension the cable in the reel. Still using the factory regulator. I wonder if something is causing cable failure...

  • @andomort
    @andomort 6 หลายเดือนก่อน

    Just had to do this not long ago, cable snapped randomly and the glass dropped to the bottom

    • @DIYGuysvideo
      @DIYGuysvideo  6 หลายเดือนก่อน +1

      Yep, seeing it more and more lately

    • @asherking3395
      @asherking3395 3 หลายเดือนก่อน

      how do you roll up ur window to take out the regulator bolts

    • @DIYGuysvideo
      @DIYGuysvideo  3 หลายเดือนก่อน

      You should be able to push it up if the cable snapped. If the motor is broken I’m less sure