Could you upload your k1 Max profile with speed etc so I can test it? I've had a hard time finding speed, etc. and getting the orca slicer to work well, but with your profile and the right calibration, maybe they will work? I don't run with hyper PLA but regular PLA so your profile might not work but maybe you could share a profile for regular PLA and not hyper PLA? I don't run with FlowTech™ Hotend for Creality K1 / K1 Max.
Hey! So my "Hyper PLA" profile I use for both regular PLA and Hyper PLA. I do recommend going through the steps in this video or my shorter one to get your K1/Max PLA profile set! I can most definitely add in my profiles in the video so you can give them a try for yourself!
@@ThatDudes3DPrints I'm having such a hard time getting my layers on my machine I can upload a picture here if they go and show you how the last one turned out. I can't find the right settings to get it right.
when i print in this slicer my print layers do not line up at all, every layer is about 0.5 mm to one side. imagine a deck of cards nicely in a stack then slide them from the top to one, side that's how my prints turn out, unusable, i just wish simplyfy3d had the fuzzy print. I'm using an ender 5
Oh man! That's rough. I know a few peoe who struggle with orca as well. Might I suggest using a profile that someone else has created not the default or try making one yourself? I had to do this when I had my ender 5 plus and it worked ok for me
I could not even work with Orca slicer, it freezes with the most minimum change or closes suddenly. Win 11, 580 8gb, Ryzen 4600... no way. Prusa slicer, Ideamaker and Cura work fine but Orca does not.
Oh man! that is unfortunate! One suggestion would be to run it in compatibility mode if you know how to do that. Hope you eventually get a chance to use it!!
@@ThatDudes3DPrints "Hi, After completing all the calibrations and setting everything up correctly, why do pointy parts still appear after some layers are printed correctly? These cause the extruder to hit them, eventually leading to the print collapsing."
5:23 5:26 Please make video for .8 Nozzle setting configurations I have ender3 v2 printer
New upload.!!!! Let’s goooo.!
Thanks for the support!
Could you upload your k1 Max profile with speed etc so I can test it? I've had a hard time finding speed, etc. and getting the orca slicer to work well, but with your profile and the right calibration, maybe they will work? I don't run with hyper PLA but regular PLA so your profile might not work but maybe you could share a profile for regular PLA and not hyper PLA? I don't run with FlowTech™ Hotend for Creality K1 / K1 Max.
Hey! So my "Hyper PLA" profile I use for both regular PLA and Hyper PLA. I do recommend going through the steps in this video or my shorter one to get your K1/Max PLA profile set! I can most definitely add in my profiles in the video so you can give them a try for yourself!
@@ThatDudes3DPrints I'm having such a hard time getting my layers on my machine I can upload a picture here if they go and show you how the last one turned out. I can't find the right settings to get it right.
when i print in this slicer my print layers do not line up at all, every layer is about 0.5 mm to one side. imagine a deck of cards nicely in a stack then slide them from the top to one, side that's how my prints turn out, unusable, i just wish simplyfy3d had the fuzzy print. I'm using an ender 5
Oh man! That's rough. I know a few peoe who struggle with orca as well. Might I suggest using a profile that someone else has created not the default or try making one yourself? I had to do this when I had my ender 5 plus and it worked ok for me
Well only if you want any other slicer that works works. Or try prusa slicer it's essentially the same as orca
I could not even work with Orca slicer, it freezes with the most minimum change or closes suddenly. Win 11, 580 8gb, Ryzen 4600... no way. Prusa slicer, Ideamaker and Cura work fine but Orca does not.
Oh man! that is unfortunate! One suggestion would be to run it in compatibility mode if you know how to do that. Hope you eventually get a chance to use it!!
@@ThatDudes3DPrints
"Hi,
After completing all the calibrations and setting everything up correctly, why do pointy parts still appear after some layers are printed correctly? These cause the extruder to hit them, eventually leading to the print collapsing."