check out our new merch! and help support future video's livelaughoffend.com/products/robinson-s-automotive-subscribe-on-youtube/robinson-s-automotive-t-shirt-l-sport-gray-52459489
Omg! I have the same year GMC Yukon and this happened to me today!! I luckily was home and my shifter was moving freely but car was showing it was in drive! I couldn't turn it back on. I let it roll out of the garage so I would have space if a tow truck needed to come but then I found your video! You were spot on! I got the part for $12.99 and it probably took me 15-20 minutes to put it on. I had a hard time getting the little white piece to pop in properly but I finally got it and pushed it onto the post and voila!!!! I can't believe this little plastic part plays such an important role in the shifting of this giant vehicle! I'm a 56 year-old mom and wife and am pretty happy about this easy and inexpensive fix especially since we are taking the car on vacation tomorrow! Thank you!!!!!
This was a life saver today when my Suburban went into park fine at Walmart and when I came out … the shifter was slipping up and down and wouldn’t go into gear. My oldest son watched your video and is fixing this now. It looks like it was the bushing kit we needed. Thanks!! 👏🏼👏🏼👏🏼
I have the same truck happened to me last night seems to be what my problem is I'm going to try to fix today thank you for the info I've just subscribed to your channel you guys are awesome
Worked out perfectly! Spent hours using different dorman part number 14047 recommended by autozone. Needless to say I never got it to fit. Watched this video went back to same store bought dorman part number 14104 and finished in 5 minutes.
It is my problem what you identified in your video I am waiting for the auto parts to open it is Sunday morning and I am going to fix it thank you for your great information and leading me to fix this it will be a very cheap cost 20 bucks to fix you guys Are awesome
This is exactly what happened to me. I thankfully found this video right away, looked under the vehicle and sure enough that's all it was. Took me about five minutes to remove the old brittle cracked one and put the new one in. It was a bit of work to get the new one in, and I used a screwdriver gently as well to coax it in to place. Mine wasn't hanging down because it didn't have a chain entangled so I had to find the area first. It was off but still tucked up out of clear sight from just looking under the Yukon quickly. But sliding under the vehicle it was easy to see.
Who knew a simple piece could cause so much trouble, right? At least you were able to tackle it like a pro! I'm glad to hear you found these video demonstrations helpful. Please consider leaving a business review; it can help inform others about our impact beyond the community and our shop g.page/r/CbL855OQaC9WEBM/review
Great video! Same thing happened to my 2013 Yukon today. Had just picked it up from the garage yesterday for an unrelated issue. Watched your vid, looked underneath and saw the problem right away! Walked to the store and got the same kit. Thanks !!!
Nice video, this is the third time in 2 years, yes I cleaned up the linkage shaft and everything else. Maybe the chain they had on it was to try and hold the cable on..I'm going to try all-weather zip ties through bushing end this time! I'm carrying a floor jack and stand with me ,this is ridiculous.
Excellent demo, Will! I've never seen that done before, it's fun to understand the options. I wondered if that D shaped plastic ring out the back was there to allow one to put some kind of safety clip or zip tie onto it to prevent if from coming off. In any case, as you know those things are really tight and normally very hard to remove.
Thank you for the compliment! that's a very good question, wish I had the answer for you. I was trying to do some research behind this similar thought earlier
Rack up a library of videos and you'll have many thousands of views. I know your helping people understand more about their vehicles and giving some of them the confidence to attempt a repair of their own.
Awesome to hear it helped you out! Hope you had a great river trip despite the mishap. Please consider leaving a business review; it can help inform others about our impact beyond the local community and our shop g.page/r/CbL855OQaC9WEBM/review
Awesome thank you. I'm in a different country (central America) in the mountains, and that feeling when your truck won't shift is a very unsettling feeling. Thankfully I'm only missing the little plastic bushing. Got some wire and wrapped it up maybe better than stock! I'm in a 2010 Z71 suburban and same exact area if anyone else is looking. Now to try and find the actual plastic bushing 😅
seen your short about this truck so i clicked on your channel & instantly subbed & watched the video about said truck lol i think ima be a longtime subscriber 😁
I had this bushing replaced last week and it came off again yesterday. It went back on and I was able to drive it home but dont trust it. Is there a pin or something to hold it from popping off?
its great to be here Wolley. I truly appreciate your support, its worth a mention I like to support local small businesses. this merch will be made locally using quality products. you wont be disappointed
Hi. Thanks for the video! I have an 2007 Yukon Denali with the 6 speed. Dorman is saying this kit 14104 is ONLY for the UPPER bushing and that they do not make the lower for some odd reason. Can you confirm if this will work on the lower bushing of a 2007? Thx Scott
Good stuff… My mechanic left me hanging. I’m gonna fix it myself and take video of it and post it where he can see it. That way, when he realize that I don’t call on him anymore or prefer business to him anymore, he can try back to like this and other moments where I have referred people to him and he has basically shat on them.
To make it easier to put the bushing through the cable, put the bushing in microwaved/boiled water for 3-5 minutes. I don't suggest boiling it. May make it too soft and deform it.
Keep putting em up I'll keep watching. I like your OPEN logo, it catches my eye. About the repair, I've used the dreaded Dorman parts bushings several times with really good luck. Seems they can do plastic parts OK.
My Yukon is stuck the shifter goes up and down but it doesn’t move front or backwards and it makes a loud screeching noise coming from the brakes ? Any idea of what happened
It must be fully seated or it will pop off. Unless the one you got is different. The first pop on sent enough look close at the outside to assure its fully locked in place
Thanks for reaching out! It's always best to get a few estimates from different shops to find the best deal. expect 1hr minimum plus part and tax. Good luck with your search!
A case of beer a few joints and that's the kind of repair they do in da hood, I may be wrong but I may be right, I'm assuming this is South Jersey, I'm in central Jersey and that's exactly what I'd expect to see where I live, there's some pretty sketchy looking vehicles in Perth Amboy.
They may have went for the forth joint on this one lol its defiantly way out there, so many easier options and they chose this! it had to be difficult to get that all up in there. Be safe out there
To fix this problem permanently. I just drilled the stud out of the gear selector lever. Welded a bolt through it and bam it’s done. Gm/Chevy made this a poor design having plastic fittings right by the exhaust.
Hahaha yes that one deserve a place on the wall. for you Paul I will put anything you would like on it, this channel was formed for all and I would support that 100% id even add your name like an employee if you wanted lol
very strange right. talked more with the owner after these findings, this was an attempt by someone to help him get back home from Philadelphia. I'm just not sure why they chose this combination. I may never understand it
This video is a great help as I attempt to fix my 2003 Tahoe. I think the D ring was Dorman's enhancement to ensure the bushing would be inserted into cable correctly aligned. You helped me identify correct part #14104. Sanding, filing, lubing the lever nipple is important since corrosion on the nipple is what wears out the bushing. New subscriber today!
@@robinsonsautocounts on the part of Philly. Some do good work but most over charge for ghetto rigging. Wish you were close my daughter in law is getting the run around with her 12 Yukon. The bushing is in and I double checked looks like this repair kit thankfully but my son says for a little it’s worth that it is slipping out of gear in motion. Hoping it’s the drive shaft and not the transmission but momma is rusty. Give me pre 2000 and I’m good in the hood with the carbs too. Hell my oldest now is a 02 exped but my Chevy was 30 and almost 700,000 miles before doom came and that was because parts were hard to come by.
Just so you can improve your vocabulary, wheel chocks are pronounced like "chalks" or "chauks" but most definitely not like "chucks" or any other kind of all-star sportsball shoe. Chocks, is the best way to say it.
check out our new merch! and help support future video's
livelaughoffend.com/products/robinson-s-automotive-subscribe-on-youtube/robinson-s-automotive-t-shirt-l-sport-gray-52459489
Omg! I have the same year GMC Yukon and this happened to me today!! I luckily was home and my shifter was moving freely but car was showing it was in drive! I couldn't turn it back on. I let it roll out of the garage so I would have space if a tow truck needed to come but then I found your video! You were spot on! I got the part for $12.99 and it probably took me 15-20 minutes to put it on. I had a hard time getting the little white piece to pop in properly but I finally got it and pushed it onto the post and voila!!!! I can't believe this little plastic part plays such an important role in the shifting of this giant vehicle! I'm a 56 year-old mom and wife and am pretty happy about this easy and inexpensive fix especially since we are taking the car on vacation tomorrow! Thank you!!!!!
Wat A Woman......
did it stay on
This was a life saver today when my Suburban went into park fine at Walmart and when I came out … the shifter was slipping up and down and wouldn’t go into gear. My oldest son watched your video and is fixing this now. It looks like it was the bushing kit we needed. Thanks!! 👏🏼👏🏼👏🏼
Thank you for sharing your experience! It's comments like yours that make creating these videos so rewarding.
⁹⁹@@robinsonsauto
Bro. You nailed this one for me as well. Car fixed, and shirt purchased. You are a Great American Hero in my book.
Glad I could help
I have the same truck happened to me last night seems to be what my problem is I'm going to try to fix today thank you for the info I've just subscribed to your channel you guys are awesome
@@israelrivera9627 good luck with it today, make sure to chock the wheels before going under. Thanks for the sub!
Worked out perfectly! Spent hours using different dorman part number 14047 recommended by autozone. Needless to say I never got it to fit. Watched this video went back to same store bought dorman part number 14104 and finished in 5 minutes.
It is my problem what you identified in your video I am waiting for the auto parts to open it is Sunday morning and I am going to fix it thank you for your great information and leading me to fix this it will be a very cheap cost 20 bucks to fix you guys Are awesome
Will it work with the 2007 model
This is exactly what happened to me. I thankfully found this video right away, looked under the vehicle and sure enough that's all it was. Took me about five minutes to remove the old brittle cracked one and put the new one in. It was a bit of work to get the new one in, and I used a screwdriver gently as well to coax it in to place. Mine wasn't hanging down because it didn't have a chain entangled so I had to find the area first. It was off but still tucked up out of clear sight from just looking under the Yukon quickly. But sliding under the vehicle it was easy to see.
Who knew a simple piece could cause so much trouble, right? At least you were able to tackle it like a pro!
I'm glad to hear you found these video demonstrations helpful. Please consider leaving a business review; it can help inform others about our impact beyond the community and our shop
g.page/r/CbL855OQaC9WEBM/review
Great video! Same thing happened to my 2013 Yukon today. Had just picked it up from the garage yesterday for an unrelated issue. Watched your vid, looked underneath and saw the problem right away! Walked to the store and got the same kit. Thanks !!!
Awesome to hear it helped you out! g.page/r/CbL855OQaC9WEBM/review
Worked for my 2012 Yukon Denali XL! Thanks!!
Nice video, this is the third time in 2 years, yes I cleaned up the linkage shaft and everything else. Maybe the chain they had on it was to try and hold the cable on..I'm going to try all-weather zip ties through bushing end this time! I'm carrying a floor jack and stand with me ,this is ridiculous.
Thank you so much! Very easy and done quick, saved us all tons of time and $$ !
Excellent demo, Will! I've never seen that done before, it's fun to understand the options. I wondered if that D shaped plastic ring out the back was there to allow one to put some kind of safety clip or zip tie onto it to prevent if from coming off. In any case, as you know those things are really tight and normally very hard to remove.
Thank you for the compliment! that's a very good question, wish I had the answer for you. I was trying to do some research behind this similar thought earlier
Rack up a library of videos and you'll have many thousands of views. I know your helping people understand more about their vehicles and giving some of them the confidence to attempt a repair of their own.
Thank you for this feedback Wyatt. I have some catching up to do to say the least. hopefully ill find my way into the TH-cam algorithm one day lol
Thanks for the video! Saved us on the side of the river after a week long river trip, you’re a life saver!
Awesome to hear it helped you out! Hope you had a great river trip despite the mishap. Please consider leaving a business review; it can help inform others about our impact beyond the local community and our shop
g.page/r/CbL855OQaC9WEBM/review
I have a 08 denali I really appreciate this video saved me money on a tow and shop just now
Awesome thank you. I'm in a different country (central America) in the mountains, and that feeling when your truck won't shift is a very unsettling feeling. Thankfully I'm only missing the little plastic bushing. Got some wire and wrapped it up maybe better than stock! I'm in a 2010 Z71 suburban and same exact area if anyone else is looking. Now to try and find the actual plastic bushing 😅
I’m glad your reviving the channel
thank you Jack! your support is acknowledged and appreciated
Thank you for the video, helped me diagnose and repair my Yukon today.
Great to hear!!! Your welcome
I have that problem. What is the name of the part ,please
Thanks for being clear and detailed about this.
your welcome
seen your short about this truck so i clicked on your channel & instantly subbed & watched the video about said truck lol i think ima be a longtime subscriber 😁
This is awesome! Thank for stopping by an subscribing, Im glad your enjoying the content. Thank you for the feedback as well 😁
Thank you, Mister now I save a penny or a couple hundred bucks plus towing service
That's awesome to hear! Saving money and avoiding the hassle of a towing service is always a win.
I had this bushing replaced last week and it came off again yesterday. It went back on and I was able to drive it home but dont trust it. Is there a pin or something to hold it from popping off?
Nice to see you back at it Will. I'll definitely be checking out the Merch. 👍
its great to be here Wolley. I truly appreciate your support, its worth a mention I like to support local small businesses. this merch will be made locally using quality products. you wont be disappointed
Dorman for the win! 🙌
They pull through more often than not. Times are getting better it seems 👍
Hi. Thanks for the video! I have an 2007 Yukon Denali with the 6 speed. Dorman is saying this kit 14104 is ONLY for the UPPER bushing and that they do not make the lower for some odd reason. Can you confirm if this will work on the lower bushing of a 2007? Thx Scott
I hope this is also a good repair for an 04 Yukon.
hey will hope all is well....the wings of failure aka wallet with wings comes in for the save! ive used that kit a couple times
wallet with wings lol love it. its a great option 100%
Saved my ass sir, truck broke with my daughter in the car and wife out of town. Thanks!
Use a wire brush on the linkage arm stud. Lubricate with Fluid Film and snap it on.
Good stuff… My mechanic left me hanging. I’m gonna fix it myself and take video of it and post it where he can see it. That way, when he realize that I don’t call on him anymore or prefer business to him anymore, he can try back to like this and other moments where I have referred people to him and he has basically shat on them.
Hope all went well
This is exactly what my Chevy did yesterday!
Thank you my good sir!!!!
your welcome
Tks man
Your welcome
To make it easier to put the bushing through the cable, put the bushing in microwaved/boiled water for 3-5 minutes. I don't suggest boiling it. May make it too soft and deform it.
Thanks for sharing
What is the part name of the arm that the shifter bushing connects to. I want to replace that on mine cause it keeps popping off
Good question. Linkage maybe or lever. One of those should come back with something
It really helped us soo much .. thanks for the wonderful video...
If your GMC Yukon is not shifting to park Set the Parking brake all the way
Does it seem to come off easier than expected?
You need to make certain it’s installed properly and fully locked. Orbit will come right off. Make sure the groove is clean.
Awesome job
Thank you
Thank you so much for this video 🙏
Keep putting em up I'll keep watching. I like your OPEN logo, it catches my eye. About the repair, I've used the dreaded Dorman parts bushings several times with really good luck. Seems they can do plastic parts OK.
Thank you for the compliments and feedback! I’m glad you like it
My Yukon is stuck the shifter goes up and down but it doesn’t move front or backwards and it makes a loud screeching noise coming from the brakes ? Any idea of what happened
Hello. Loving the video I am having the same problem. Do you know the part number for the bracket? I will need to replace this part
I got a 99 gmc suburban needs front end repair are parts easy to get? Getting spark plugs/wires replaced
I haven’t had to many issues getting parts for this vintage as of yet
The bushing I got does not stay on the pin. Anybody have a work around?
It must be fully seated or it will pop off. Unless the one you got is different. The first pop on sent enough look close at the outside to assure its fully locked in place
Life saver thank you 🙏🏾
Would it be recommended to replace the lower cable ?
It’s an option. However not necessary in this case. But yes they can most definitely replace it.
How much Did you Charge or Can you give me an estimate on what a shop might charge please??
Thanks for reaching out! It's always best to get a few estimates from different shops to find the best deal. expect 1hr minimum plus part and tax. Good luck with your search!
A case of beer a few joints and that's the kind of repair they do in da hood, I may be wrong but I may be right, I'm assuming this is South Jersey, I'm in central Jersey and that's exactly what I'd expect to see where I live, there's some pretty sketchy looking vehicles in Perth Amboy.
They may have went for the forth joint on this one lol its defiantly way out there, so many easier options and they chose this! it had to be difficult to get that all up in there. Be safe out there
Just fixed mine!
To fix this problem permanently. I just drilled the stud out of the gear selector lever. Welded a bolt through it and bam it’s done. Gm/Chevy made this a poor design having plastic fittings right by the exhaust.
You should of made that permanent fix a video also.
This might be the problem I have Wonder if my mechanic can do this?
tks
Your welcome
shade tree repair
I'm starting to worry about whoever did this, think they may have falling out of the shade tree and hit their head, then maybe a joint prior
Thanks
How much does it cost if a mechanic does it??
You should put a pateon on that dodgy repair may make a fortune from it and the new merch top looks really cool but needs a uk flag on the side lol
Hahaha yes that one deserve a place on the wall. for you Paul I will put anything you would like on it, this channel was formed for all and I would support that 100% id even add your name like an employee if you wanted lol
@@robinsonsauto lol sounds good but can imagine cost of shipping to the uk be steep price but can you buy them inside out too
Where you located?
Pennsburg pa
Road debris jumped up onto that linkage and dislodged it. Weird road debris, though.
very strange right. talked more with the owner after these findings, this was an attempt by someone to help him get back home from Philadelphia. I'm just not sure why they chose this combination. I may never understand it
@@robinsonsauto Oh OK , I get it. I imagine they came to that conclusion after figuring that super glue would be a bad idea.
@@keepingup2952 hahaha 🤣
This video is a great help as I attempt to fix my 2003 Tahoe. I think the D ring was Dorman's enhancement to ensure the bushing would be inserted into cable correctly aligned. You helped me identify correct part #14104. Sanding, filing, lubing the lever nipple is important since corrosion on the nipple is what wears out the bushing. New subscriber today!
@@robinsonsautocounts on the part of Philly. Some do good work but most over charge for ghetto rigging. Wish you were close my daughter in law is getting the run around with her 12 Yukon. The bushing is in and I double checked looks like this repair kit thankfully but my son says for a little it’s worth that it is slipping out of gear in motion. Hoping it’s the drive shaft and not the transmission but momma is rusty. Give me pre 2000 and I’m good in the hood with the carbs too. Hell my oldest now is a 02 exped but my Chevy was 30 and almost 700,000 miles before doom came and that was because parts were hard to come by.
👍🏻👍🏻
thank you
Just so you can improve your vocabulary, wheel chocks are pronounced like "chalks" or "chauks" but most definitely not like "chucks" or any other kind of all-star sportsball shoe. Chocks, is the best way to say it.
Thank you for the education! I have been saying this wrong the who’s time 😄
They don’t last long.. slips off over time