You are a lifesaver! You saved 2 brand new ratchet straps from going out to the dumpster. I am a rookie and wound 2 straps and could not get them loose. I was so frustrated i was literally throwing them out. All it took was watching your video and a pair of channel locks. Thanks so much!
Just wanted to say thank you for this video. 1st time truck owner and used my ratchet straps for the first time to tie down some boxes. Over ratcheted 1 strap and couldn't get it loose. Spent all evening/night/day yesterday trying to do it manually, find ways to undo it, etc. Finally found this video, saw your technique and within 30secs, it was loose and free!
thanks, the bit about turning the side knob with plyers worked like a charm. (i used vice grips because i'm a 47 yr old female and vice grips are easier than pliers for me). i had to watch that part of your video about 10 times to make sure i was turning the knob in the right direction, but after i watched your video i loosened it in about 2 minutes, after being confused for over an hour trying to pull it loose by hand!!! thanks!! youtube for the win again!! thanks to everyone who posts these helpful how-to's on youtube. so far i've got my lawnmower blade unstuck (couldnt pull the string to start the lawnmower because chunked up grass under the mower and i never thought to check that), fixed my dryer by replacing a fuse, and now undid my locked ratchet (that i need to use tomorrow to pick up a free washer and dryer from my friend who is moving out of state), thanks again!!
I couldn't find nothing how to fix my straps, because it was put in the wrong way oops🙃 ..... Thanks to you, I was able to fix it 😃 THANK YOU!!😁 you were a BIG HELP!! God bless
Awesome mine didn't have a nice handle on the bolt like yours but levering a screw driver in the bolt head groove got it moving. Thanks for the helped.
Yeah mine also didn’t even have a traditional bolt but I was able to use this concept with a needle nose pliers to turn the mechanism enough back and forth to loosen it enough to start freeing and unwinding it. 🙌🏻 Then found a doityourselfwithjoe video that showed how to wind it properly to prevent issues getting stuck, & I figured out I started out winding too much to begin with, which was problem number 1 after maybe it was started from the wrong direction to begin with! Thanks you guys with TH-cam channels for helping people out!!!
Thanks you Sir for making my life much more easier. Was about to through them againt the brick wall or cut the strap into cute little tiny shapes. God bless you! For saving the soul of a stuck ratchet!!
Thanks man got a few that are that way and dont know what to do. However you gave me the idea and first year using rachet straps for work. I was just working around it and not using it ....
I had 3 ratchet straps that were jammed after I tightened them too much. I spent a couple hours trying to fix it and this solved my issue in just a few minutes with a pair of pliers.
You fucking legend. All the straps I'd used previously have a screw that you could turn.. I thought this was a cap covering the screw.. This was helpful as fuck.
Mine has a weird not quite a bolt thing with a pin that holds each side in place so I used a needle nosed pliers to grab the pin & turn it slightly back and forth just enough that it started loosening and I was able to unwind & free it!
Wish I could add a picture of what mine looks like because it’s weird and is just the center winding shaft stuck through each side with a metal pin to hold each side in place. So I got a needle nosed pliers and grabbed the pin on one side and was able to twist back and forth just enough to loosen it enough to unwind the whole thing finally after it had been so tight & jammed it didn’t seem like it would ever work again.
If he was doing magic, it would make sense to shake to object so we can't see what he is doing. But if he is showing something, HOLD THE FUKING CAMERA AND HAND STEADY!!!
You are a lifesaver! You saved 2 brand new ratchet straps from going out to the dumpster. I am a rookie and wound 2 straps and could not get them loose. I was so frustrated i was literally throwing them out. All it took was watching your video and a pair of channel locks. Thanks so much!
Just wanted to say thank you for this video. 1st time truck owner and used my ratchet straps for the first time to tie down some boxes. Over ratcheted 1 strap and couldn't get it loose.
Spent all evening/night/day yesterday trying to do it manually, find ways to undo it, etc.
Finally found this video, saw your technique and within 30secs, it was loose and free!
thanks, the bit about turning the side knob with plyers worked like a charm. (i used vice grips because i'm a 47 yr old female and vice grips are easier than pliers for me). i had to watch that part of your video about 10 times to make sure i was turning the knob in the right direction, but after i watched your video i loosened it in about 2 minutes, after being confused for over an hour trying to pull it loose by hand!!! thanks!! youtube for the win again!! thanks to everyone who posts these helpful how-to's on youtube. so far i've got my lawnmower blade unstuck (couldnt pull the string to start the lawnmower because chunked up grass under the mower and i never thought to check that), fixed my dryer by replacing a fuse, and now undid my locked ratchet (that i need to use tomorrow to pick up a free washer and dryer from my friend who is moving out of state), thanks again!!
Awesome! I know I’ve learned and been able to also show my teens how to unclog the sink trap and a couple other things like this too!
Hooray for TH-cam for helping u be a strong independent woman who can get shit done lol
I feel stupid man! just spent an hour with this crap.... you're a life savior... thank
Act
you are not the first one to do this, and you won't be the last one either..
I couldn't find nothing how to fix my straps, because it was put in the wrong way oops🙃 ..... Thanks to you, I was able to fix it 😃 THANK YOU!!😁 you were a BIG HELP!! God bless
Awesome mine didn't have a nice handle on the bolt like yours but levering a screw driver in the bolt head groove got it moving. Thanks for the helped.
Yeah mine also didn’t even have a traditional bolt but I was able to use this concept with a needle nose pliers to turn the mechanism enough back and forth to loosen it enough to start freeing and unwinding it. 🙌🏻
Then found a doityourselfwithjoe video that showed how to wind it properly to prevent issues getting stuck, & I figured out I started out winding too much to begin with, which was problem number 1 after maybe it was started from the wrong direction to begin with!
Thanks you guys with TH-cam channels for helping people out!!!
Screwed up my buddys ratchet strap and searched the internet for a half hour before I found this. 30 seconds later I fixed it. Good stuff bro
Thanks you Sir for making my life much more easier. Was about to through them againt the brick wall or cut the strap into cute little tiny shapes.
God bless you!
For saving the soul of a stuck ratchet!!
Thank you sooooooo much. It took me less than 5 minutes to unwind ratchet. I wasted almost 2 hours trying to pull and tug. 🙄
Yes. Dude you just saved me hours of irritation and a pile of quarters for the swear jar. I thank you.
lol, very funny but very true..
Thanks man got a few that are that way and dont know what to do. However you gave me the idea and first year using rachet straps for work. I was just working around it and not using it ....
I echo the other folks, knew was something simple thanks got it unwound in about five secs
first time user, jammed it, this really helped, thank you my dude, i hope you are on to bigger and better things
thanks you save me money I was so up set at my self at first for doing it wrong thank again Love this quick easy video
Thank you! it may seem simple but these jammed up ratchet straps were driving me insane!!!!!!!!!
Thanks bro saved me from buying a new one was pissing me the fk off couldn’t loosen it
I had 3 ratchet straps that were jammed after I tightened them too much. I spent a couple hours trying to fix it and this solved my issue in just a few minutes with a pair of pliers.
You fucking legend. All the straps I'd used previously have a screw that you could turn.. I thought this was a cap covering the screw.. This was helpful as fuck.
Worked for me thanks! I was about to cut it loose and just use the strap.
Most helpful video ive seen in awhile. Thanks
thank you so much!!! so easy
Thank you very much!
Oh my gosh...I love TH-cam but at the same time I feel like an idiot
Thank you!
Man. You made my day with this tip!!
Mo Po I’m glad it was helpful.
Thank you. Did not know about the knobs. Saved my keester.
Tip of the year! Thanks bro! 😆
…and all under 42 seconds. Thanks Man
These get jammed everytime I use them
Awesome, straight to the point
Thank you!!!
Great video, thanks for posting.
Well now i just feel stupid. I just cut through one yesterday
Thank you
Bro, you saved my sanity! Cheers!
Ha ha I'm glad it was helpful.
Dude you da bomb, bout to cut it!!! Thanks for your help👍🏼
Finally a video of exactly what I had to do 🙆🏾♂️. Thank you
You sir saved my life
Big help thanks
Thank you for your help!
Thank ! Very helpful👍👍👍👍👍
Great vid !!!
Thank you !!🫡🇺🇸
I got my rapet strap fixed from this video thanks
Bro! Thank you for an easy explanation. Fixed my strap.
Thank you sir 👍🏽
Cute turkey in the background
thank you!
My hero.
Dude you rule
Nice...
Brilliant
What if you don't have those dials on the side?
Mine has a weird not quite a bolt thing with a pin that holds each side in place so I used a needle nosed pliers to grab the pin & turn it slightly back and forth just enough that it started loosening and I was able to unwind & free it!
You're doing God's work good sir
Well great. What if yours does NOT have bolts on the sides. No help here.
There should be a groove in the end of the shaft, insert a screw driver and lever it till the shaft turns to loosen the straps enough
Wish I could add a picture of what mine looks like because it’s weird and is just the center winding shaft stuck through each side with a metal pin to hold each side in place.
So I got a needle nosed pliers and grabbed the pin on one side and was able to twist back and forth just enough to loosen it enough to unwind the whole thing finally after it had been so tight & jammed it didn’t seem like it would ever work again.
Yup that dont help me 😢 i dont have that kind.
I fucked mine up really bad its tangles and shit now
cute
This video always gets stuck at 13 seconds wtf?
If he was doing magic, it would make sense to shake to object so we can't see what he is doing. But if he is showing something, HOLD THE FUKING CAMERA AND HAND STEADY!!!
Thank you!
Thank you!