INSTALLING Relentless Fabrication High Clearance Rear Bumper! Toyota Tacoma
ฝัง
- เผยแพร่เมื่อ 18 มี.ค. 2020
- Finally INSTALLING A High Clearance Rear Bumper on my 3rd generation Toyota Tacoma. The Relentless Fabrication High Clearance Rear bumper! After my offroad "accident", I have been preparing for how I was going to fix it, and this is the best solution!
👋 🏎 INSTALLING High Clearance Rear Bumper! 3RD Gen Tacoma
🤠Bros FOURR Speed Apparel : teespring.com/en-GB/stores/br...
😈 SUBSCRIBE: / brosfourrspeed
❤️ Follow my IG / brosfourrspeed
Our Equipment:
- Sony Alpha a5100: amzn.to/2Pt5pCS
- GoPro Hero 8: amzn.to/2Qvg5Q2
- GoPro Hero 7: amzn.to/2NHSyKz
- DJI Mavic Pro: amzn.to/2HPjG6H
- Apple Imac 21in: amzn.to/2NIssa6
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Relentless Fabrication: www.relentlessfabrication.com
Before/After Measurements:
Behind wheel: 24.5''/ 27.2''
Corner: 25.75''/ 27.2''
Hitch: 17.75''/ 21''
Corner: 24'' / 27''
Behind wheel: 24'' / 27''
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📺 OUR TOP PLAYLISTS :
Tacoma Videos: • Toyota Tacoma Videos
GT-R Videos: • Nissan GT-R Videos
Supra Videos: • Toyota Supra Videos
Review Videos: • Car Review Videos
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🗣 TALK TO ME ON MY SOCIAL MEDIA !
Instagram 🙋🏻♂️ / brosfourrspeed
Facebook 🙋🏻♂️ / brosfourrspeed
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👁 WATCH MORE OF OUR AUTOMOTIVE VIDEOS :
Best Lift Kit: • What Is The BEST Lift ...
Tacoma Lift Kit Install: • The BIGGEST MOD For My...
Ditch Lights: • 3RD GENERATION TOYOTA ...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔮 WATCH OUR OLD VIDEOS :
Tonneau Cover: • Let The TACOMA Mods Be...
Broken Tacoma: • I BROKE My 3rd Generat...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔥 PERSONAL FAVORITE VIDEOS OF MINE :
Collection Day: • COLLECTION DAY! Buying...
Painting My Tacoma: • I Did THIS To My Brand...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
❤️ YOU MAY ALSO LIKE :
TACOMA BEAST Hood Strut: • Toyota Tacoma Must Hav...
Maxx Powell: • Top Five Toyota Tacoma...
Last Line of Defense: • Tacoma Interior MODS a...
Donut Media: • 10 Best TRUCKS Under $10k
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👁 About this video : The install for this is intimidating because you are not going back to stock, but working through it step by step, it was easy. It's not a hard project to do, but very time consuming and you have to be perfect on the cut. Removing the stock bumper is not hard, it took about 10/15 minutes. Switching over the wiring to the new bumper is straight forward. After that we spent about 4 hours measuring, cutting and getting everything prepared for the bumper. This has to be perfectly level and straight so by following our method you should be good. Then it was time to install the new bumper and get it bolted in. I will be adding some wire to the harness to extend it, just using similar gauge wire or larger will work and that shouldn't be too hard to do.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👋About this channel: What's Up Everybody! And Welcome To, Bros FOURR Speed! We are two brothers, Mike and Brian, and we love cars and anything automotive related! We started this channel filming in the backyard just doing fun things like riding dirt bikes and skateboarding in elementary s school! We never knew that filming at such an early age would eventually lead us to a successful channel and the amazing opportunity we have to drive very cool cars and anything automotive related! We enjoy working on our own cars and showing the DIY process and how you can save money doing these installations! Feel free to smash that subscribe button along with the notification bell to stay up to date on our daily uploads and what we have going on! We bring you unbiased reviews and vlogs involving sweet cars, motorcycles and anything with wheels and an engine!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🎉 THANK YOU FOR YOUR SUPPORT! ❤️💙💚
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📥 SPONSORS / Collabs :
Want us to promote your product? Email for rates and availability 🤝
Email: brosfourrspeed@gmail.com ✍️
www.epidemicsound.com
#3rdgentacoma #tacoma #tacomabeast - ยานยนต์และพาหนะ
![[#SHORTS CLIP] ครูอึ้ง กรรมการอึ้ง ฮ่าๆ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/qeBTuMJs4t0/mqdefault.jpg)
Looks nice, cant wait for someone to damage my rear bumper so I can order one.
Haha yeah I have definitely loved this so far! Looks like it could've been factory!
Looks like you're using a diamond cutting wheel and instead of a regular cutoff wheel. Diamond wheels are more for tile and other ceramic or stone applications. Bumper looks good!
I'm watching this video on my TV and that's exactly what I was going to say for comment
I’ll tell you what you guys got my respect you tackle everything.
Thanks! It was intimidating but just taking it step by step made it a lot easier to do, not a crazy amount of work looking back!
I'm currently buying my first Taco and you guys inspire me with ideas. Awesome truck!!
That is awesome! Congrats! You will definitely enjoy the Tacoma! So much to do and so many different directions for the build!
Very nice job on the cutting! Love these install videos. Keep them coming!
Thanks!! I'm just glad it was a level cut!
Your bumper really looks great and the added 4 inch clearance is really helpful for rock climbing and all your off-road fun.👌
I'll be filming a video on it offroad here soon! Can't wait to share how much better it is!!
Nice job cutting and fitting. I'm surprised you didn't heat shrink all of those wires though. Tape will eventually start holding moisture.
I had all the tubes ready to go, but from soldering it made it bigger than the tubes I had, otherwise I would have.
Awesome bro, the effort in the measurements paid off! That looks so good
Thanks a ton! It's been the best mod I've done so far!
Just finished the pick up for the bumper video. And boom the install just got uploaded. Great video. I really appreciate how you show how and teach a bit on each mod install.
Glad you liked it!!
@@BrosFOURRSpeed yeah i decided a while back i want a tacoma. Test drove a trd offroad last week and loved it. So until i get it im making a list of mods i want lol. And i love your videos showing how to do some of them. Other mods id like to do is upgrade sound system i love good bass. And to chip it for performance. If your thinking about it id love a video as im not good with electronics lol.
@@praiselordcthulhu2428 There's definitely a lot you can do with it, not sure if I'll be changing that electronics but we'll see!
Nice job, I bet you feel much better now and it was worth the money and time. Thanks for sharing.
This has been one of the best mods I could have done!! I have no clearance issues offroad so it's so much more capable now!
Looks awesome!
Looks great. One of my favorite high clearance bumpers for the Tacoma. Im looking for one myself now. Just wish the lead times weren't so long.
Yea that's the biggest thing about products like this but well worth it!
Amazing job guys! Looks professionally done👍🍺
Thanks 👍
Bros four speed.... you do know we drive tacoma's right? 😆 😂 😆 😂 😆
Lol that’s cool you have one! I love the Tacomas!
Looks good, nice job boys!
Thanks!
looks fantastic! Matches all the body lines real nice
That's the main reason I went with this one!
Great video!!! Looks good! Is that y’all friend? Helping y’all out
Impressive install. I'd never be confident enough to make those cuts. Final product is awesome!
Yea it was a little intimidating, but not bad after seeing how it looks!
Absolutely agree, it turned out perfectly.
Looks really dope how it cuts in like that, perfect fit for sure.
Oh yeah!
full send on the rear bumper, sick!!!
Haha yeah!!
Man I wish I had the balls and confidence to do this to my 19 Tacoma trdpro voodoo blue! Great job looks awesome and done right!👍
Haha thanks, it was intimidating, but after doing it, I'd do it again!
Outstanding job! I'm always amazed at how you guys can do just about everything with your vehicles right in your own driveway and it always turns out great. I would have accidentally sawed through a tire and made a complete disaster out of the project.
Haha, It's nice that we've been working on the vehicles a long time to adapt to a new project like this, it was nerve racking some what cutting but glad it came out nice!
I had no idea David Spade drove a Tacoma. Very cool.
That looks great!
Thanks! It was definitely a big project, but I love how it turned out! Makes offroading easier lol!
Love the new bumper!!! It looks a whole lot better than before!👍
Thanks! I was ready to fix that dent and this was the cheaper solution so that works with me!
Looks amazing. Great job guys. Hope you are well in these crazy times. God bless you both and thank you for the great content.
Glad you enjoyed it! And stay well also!
Bros FOURR Speed i sure did. Thank you.
Great job👊🏼
Thanks! What kind of truck is in your profile pic!?
Very well done video, looks great on the truck!
Appreciate that! Can't wait to test it offroad! It's already make a huge difference!
Looks so much cleaner it looks really good 👍🏾
Thank you!
Nice work, gents. 👍
Thanks! 👍
Great job on the bumper! I really like the vinyl decals too! Gives it that Raptor look
Thanks! That wasn't too bad of a project especially comparing it to this one!
Thank you for sharing.
It was the best bumper to install in my opinion!
Wow looks amazing 🔥
Thanks!
Looks nice. Good Job
Thanks! Working on a brand new front bumper now! This was a cool project!
Yeah man that looks solid
Appreciate that!
Love the new bumper!!!😍😍😍😍😍
Thanks! I love it too!
Great job guys!
Thanks! This was a cool project for the Tacoma and I've loved having this bumper! It's been great for offroading!
I have a basic sr that someone backed into in a parking lot now I'm looking into my options for a fix
Oh wow! Sorry to hear that! There are plenty of steel bumper options if you don't want the high clearance route! I've seen some for around $400-600 if you want something basic!
Looks great! Mine should be here in a few weeks. Can't wait!
Oh nice!!
Great looking bumper
Tacoma looks amazing
Thanks!
Tons of props for doing it yourself! Looks good!
Thanks! It was a fun project!
Looks good.
Sweet looking bumper. I am new to your channel and I have learned a ton. Plus it's also a great way to spend your social distancing. Keep up the great videos.
Thanks for checking out the channel! And yeah great project for sure!
Man this was a great DIY :) Thanks for sharing!
Glad you liked it!
good job, dad. Thanks for the well done video. BTW cut-off disc are better for sheet metal.
Glad you enjoyed the video, I didn’t have any issues with the one I used. Seemed fine to me.
Great video boys! Keep up the quality work
Thanks! Will do!
Relentless makes some awesome stuff. Great choice 👌
Oh yeah, for sure!!
Dude I’m such a fan. Look forward to ur videos more then most. Keep it up. Would love a blue vinyl patch for my truck. Just a suggestion. Make it happen lol
What would be the blue vinyl patch?
Bros FOURR Speed idk like a blue Tacoma shaped patch. I know a lot of guys that put patches all over their trucks headliner. Would be cool.
@@justingarnick6021 That would actually be pretty cool!
Nice job, looks good!!
Thanks!
@@BrosFOURRSpeed you're welcome 🤜🏻🤛🏻
Looks great! Good job
Thanks!
Gr8 job 👍👍 looks awesome ! !
Thanks!
I been trying to replace my stock bumper but I need the hitch you doing a beautiful job congrats 👏
Thanks 👍 I have seen a lot of regular bumpers with hitches, but if you want more clearance, this is a great one to get!
If you want a high clearance bumper with a hitch you could get CBI's bumper they hide the hitch behind the license plate
@@look92vean98 I saw that as an option too, either one, they are both great!
great jobs fellas
Appreciate it!
Damn guys freaken awesome awesome job on the installation of the high clearance rear bumper. It actually looks like it was purchased with that bumper already installed by the dealership
Thanks! I love how it turned out! Can't wait to hit the trails and test it out!
Another Great job guys .
Glad you enjoyed it!
good job. i have to do my 2021 zr2 now.
Best mod I have ever done on a truck!! I love the function and the look! I have so much clearance now on the trails!
You guys did an Awesome Job!!
Thanks!
Nice work,have to check out that bumper looks so much better than the stock one
Thanks 👍 I've been really happy with this bumper setup!
Great Job Bros!!
Thanks!
enjoyed the video thanks
Glad you enjoyed it!
Great video. I am waiting on my Relentless bumper with the tire swing out carrier to arrive in OCT. . Ordered the bumper and swing back in July. Course my measurements will be different as I am installing it on a 2011 TX Pro Edition. Your install video will help me get mine installed. Thanks for making the video. \m/
Just make sure to measure measure measure lol, I spent a good amount of time on that and glad I did because it came out perfect! Good luck with the install, it's a fun project!
I ordered mine back in May and just got it last week, but you never know
That bumper definitely gives that truck a much better look, if I ever do this to my truck I will call you guys 🤣 you guys are like pros at this
Dakota Hamilton haha. It’s an awesome look!
Thats awesome guys. Looks great and good work.
Thanks!
Bros FOURR Speed Maybe I’ll drive to NC when i get mine so you can help me. 😂
Use heat shrink tubing next time for a better and moisture proofing the wire harness.
Can you time stamp where you saw that? I used heat shrink tubes on the wires for the hitch connection..
Nice job! Good looking truck! Enjoy!
Thanks 👍
Looks great
Thanks!
That’s about 4” added clearance... nice
Oh yeah! It'll be great for adventures!
great video! thanks for making it. my only critique is your solder job. did you use flux?
Yea we did! The rod that you saw was it.
At the beginning I was thinking this would be the bumper I get for mine but then I got to the cutting part haha. Looks super clean tho
Haha yeah! There was no going back after that! But I love it! The best bumper I could have put on the truck and I have no issues offroad with it! Definitely worth it if you hit the trails a lot!
It's been a while, looking back at 2021, appreciate your different builds. what is new over on the East Coast?
Glad you enjoyed the videos! 2024 Tacoma is the next project to work on later this year!
Nice job bro’s
Appreciate it!
For measuring use a board that is long enough to span the bed and overhang by 6 inches on side , and attach a 20 inch board.
That's pretty much what we did. Came out perfect as shown in the vid ;)
Damn that look really good. Really thinking about that for my Tacoma now
Haha yea! I love how it turned out!
So I would in the future try and cut the plug back a little bit so just in case you ever need to use that as a repair pigtail. Also might want to upgrade your head shrink or get you a heat gun to try and help seal that heat shrink better. The way it looked that is a good place for water to get in and rust your connection up. As much as I like the bumper I don't think I could ever cut my truck up.
I'm not sure what you mean by using it as a repair pigtail, it's been fine and functional since I've installed it! It's been the best mod and great for offroading!
@@BrosFOURRSpeed the plug you cut off of the tag light plug where you wired up the new lights. Cutting it right at the plug makes it to where it can't be used again. I do love the look, but you have more courage than I do to cut my truck With the RH side damage I can see why. You are where I got my exhaust idea for my 2017 Trd Tacoma from.
@@johnredden8728 I use the plug all the time, it’s completely functional! Just needed to extend it to fit the new bumper location! But yeah it was a big project and happy with it! And that’s awesome to hear! I’ve had a few exhausts but it always nice to see videos on that helping others!
It looks spectacular.. Good work brother.. Is there anyway you can tell me what is the part number of the black plastic piece located under the taillight that has never been taped..thank you
I tried looking it up and I'm not sure what it's called to be honest! Maybe your local Toyota dealer can give you a number on that and then you can look that up to get it for less!
Good thing u r working on the Takoma. When the Vette comes in I think the truck might be neglected
Haha possibly!
Called it!
So I convinced my dad to buy a 2020 off-road and for some reason he missed his g37 too much so he gave the Tacoma to me😂 There is so many mods I want to do to it but I’m going to have to wait until I’m out of college and have a career because these Tacoma mods are really expensive . Definitely want to do this bumper at some point. Thanks for making another great tutorial vid!
Glad you like it! Definitely plenty of mods for the Tacoma! I started small and worked up to these ones!
Lots of vids on Tacoma upgrades. Downside is adding lots of extra weight reducing mpg and slowing it down. Not to mention adding massive tires that's not recommended by Toyota. Then people complain(not you) that Tacoma is under powered. My mostly stock SR v6 is plenty fast. I've taken it over several mountain passes to go skiing and some off roading and never felt it was under powered. Use it for what it was intended and it has plenty of power. Don't get me wrong I did add A/T tires. Tires that are recommended size and some minor aesthetic trim pieces. When adding larger tires it effects power because the rear gearing won't match the tire size.
That's all true, but I don't really care about the mpg as much and I haven't noticed it being underpowered with the larger tires so I don't know why people complain about that. I don't use this as a sportscar so I don't notice lack of power! I might be going up another size this year, but looking to regear the truck and see how that helps!
Good freakn job
Thank you! One of the those projects to not screw up on lol! But don't regret this bumper, the coolest thing I've added to the Tacoma so far!
Like everyone else said: great cojones on that mod!!. I was so scared watching you cut without the cover...safety first!!🙈. Great looking truck.
lol, yeah it took some time to build up to doing this mod. Came out great!! Flawless fitment!
Maybe go back and try the same river crossing where you dinged your truck earlier and see how it clears that big drop now? Will be a nice reference!
I want to! But that area has got very sketchy since then lol
Nice mod bro! Looks amazing. What size edge trim guard did you use? 1/8 edge?1/16 edge?i’m doing that soon on my 18 Tacoma. Thanks in advance!!!
Honestly I don't know! I've only seen it in one size so whatever is the "regular" size for it!
You guys do such nice work. You make it seem so easy ,but we don't see all the added work. Haha.
Honestly, that added weight distribution will be nice. I think you will notice it handles and feels better with the weight in the back, because it won't be so light and feel like it's swinging around, esp on windy days. This was fun to watch. 👍
Thanks 👍 I think I have noticed it not being as bouncy in the rear which is nice.
I watch many builds on video and this video tops the list for rear bumper installs... nice job, excellent detail, and thank you. Would you please share the video editing software you use to produce this? Thanks
I appreciate that!! The coolest mod I have installed for sure! And I use iMovie!
@@BrosFOURRSpeed Thanks for sharing the editor. I have apple so I will download it. Thanks so much!
Look good think of get one then get one for front high clear bumper so can go over some rock without hit also can fit big tire under it
haha nice! I'm looking into a front bumper too at some point.
Cool mod
Very nice and very clean. I'm was surprised to see how well the cuts cleaned up with the cutting weel of choice, because that looked like a concrete cutting weel and not a actual cut off weel which would have left a thinner and cleaner cut! But overall all I love the look and the video.
You have a good eye, of the wheels I had this seemed like the best one to use!
Great job guys! Unbelievable for a house job seriously!
Thanks!
Que buen video ii trabajo isieron 👏👏👏👏👏
Gracias!
One thing to consider is the weight you are adding is rear of the axle which is why people only recommend you minimize the weight of objects in your rear. Lol. Also, remember the next mods you will do are adding a dual tire swing out as that will house your tire and possible Jerry cans. As doing a high clearance bumper and keeping the tire underneath is kids pointless. Nice vid and strong work.
I do have upgraded add a leafs which help with the weight, but I only added about 70lbs which is really insignificant I think. For the spare I'm just going to keep it, I don't plan on buying a true full size because to me that's a waste of money, so if I have to use this one, I'll have it! This was definitely a fun project though! Thanks for watching!
Nice job! Also, by just going down you were inadvertently using the file correctly. They only cut in one direction anyway.
Haha true, glad it worked out!!
Your father should proud of you bros!
I take it that your taco doesn't have the Blind spot monitor system and backup sensors... Dang.... I'm getting ready to upgrade my 2017 with aftermarket replacement bumpers and was curious on the removal of those monitors and any code issues... I'll find out soon enough!
The blind spot wasn't available on 2017's and I didn't get the tech package to have the sensors. Didn't need or want them. They make this bumper to accommodate the backup sensors! It will have cutouts for you to install them into this one! The blind spot is integrated into the tail light I believe or side mirrors so that shouldn't be an issue.
Flux the wires before you solder. It’ll let the solder flow into the connection and you’ll have a much stronger and dependable joint. 👍🏻
Thanks for the tip, I've done it multiple times this way and it seems to do fine!
@@BrosFOURRSpeed you’re rolling the dice, but ok. The sharp edges and random strands will work their way through the heat shrink and tape eventually. If it came from the factory like that you’d be upset. Do it the right way or not, it’s your truck.
@@alshackleford7906 They won't come apart the way it is.
@@BrosFOURRSpeed you half assed your solder job and that’s obvious. If that’s the way you want to do it then do it, just stop trying to justify cutting corners when it’s so easy to do it right.
@@alshackleford7906 Honestly it's connected fine man, I don't see anything wrong with it, it works and not much more you can do. I'm sure it's not 100% off the text book, but that's what I did. I actually did flux the wires, but it's unnecessary in most applications.
How has everything worked out on the rear bumper? I am looking at relentless fab for a high clearance rear bumper with swing out tire carrier just wondering how you like it now that its been a while , would you recommend it? I am trying to decide between them and C-4 fab and possibly at the helm fab.
I love it!! Best mod I could have done! I've been offroad with it and I have so much clearance, it was worth it! And it looks cool haha..I'm glad I didn't go with the tire carrier because I use the bed a lot with the tailgate down, so if you don't have to worry about that and like the look go for it! I feel like all the bumpers are very similar, just based on the style you like. I like how the bed sides had the curve to them and not just a straight line.
How'd you address the exhaust being so low as to fit under the original bumper versus the new?
I have a high clearance exhaust ;)
Looks awesome and honestly the best looking rear bumper on the market but I’m biased, I’m running their front bumper.
How long was the wait time for the rear?
I think I waited about 3 or 4 weeks, but they happen to have one, just needed powder coating otherwise it might be a little longer.
Your advertiser at beginning great glue need to try that.